When you want to find merit brass 2, you may need to consider between many choices. Finding the best merit brass 2 is not an easy task. In this post, we create a very short list about top 10 the best merit brass 2 for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 merit brass 2:
Best merit brass 2
1. 316/316L Forged Stainless Steel Pipe Fitting, Tee, Class 3000, 2" NPT Female by Merit Brass
Feature
T-shaped pipe fitting for connecting and branching pipesFemale National Pipe Taper (NPT) threads on run and branches
Made from stainless steel 316/316L for corrosion resistance
Class 3000 for use in high pressure applications
Forged for durability
Description
This tee is a class 3000 forged stainless steel 316/316L t-shaped pipe fitting with female National Pipe Taper (NPT) threads on the run and branches for connecting a total of three pieces of pipe. The class 3000 tee has been forged from stainless steel 316/316L for durability and use in high pressure applications. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. This fitting meets standards ASTM A182, ASME SA182, and ANSI B16.11 for quality assurance.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
2. Lead Free Brass Pipe Fitting, Reducing Tee, Class 125, 2" x 2" x 3/4" NPT Female
Feature
Reducing tee with three openings, one smaller than the other two, to connect and branch three sections of pipeFemale National Pipe Taper (NPT) threads on all three ends for connecting to male threaded pipes
Made from lead-free brass for higher corrosion resistance than steel
Relative softness of metal enables tighter seals and greater ease in installation
Meets standard ASTM B-584-06 for lead-free quality assurance
Description
The Merit Brass reducing tee is a class 125 lead free brass pipe fitting with female National Pipe Taper (NPT) threads for connecting and branching three sections of pipe or fittings. Reducing tees have one opening smaller than the other two to connect different sizes of pipes. Pipe dimensions for tees are represented as A x B x C. A and B indicate the main run on the fitting, and C indicates the branch. This tee has NPT threads on all three ends for creating tighter seals than straight threads, and it is made of lead free brass, which is comparable in strength to stainless steel and is more corrosion resistant. This class 125 fitting meets standards ASTM B-584-06 (C89833), ANSI B 1.20.1, and ANSI B 16.15 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The company, family-owned since 1937 and headquartered in Cleveland, OH, distributes pipe fittings in the United States and Canada.
3. Merit Brass XNL106-02 Lead Free Brass Pipe Fitting, Tee, Class 125, 1/8" NPT Female (Pack of 25)
Feature
Tee with three openings to connect and branch three sections of pipeFemale National Pipe Taper (NPT) threads for use with male threaded pipes
Made from lead-free brass for higher corrosion resistance than steel
Relative softness of metal enables tighter seals and greater ease in installation
Meets standard ASTM B-584-06 for lead-free quality assurance
Description
The Merit Brass tee is a class 125 lead free brass pipe fitting with female National Pipe Taper (NPT) threads for connecting and branching three sections of pipe or fittings. All three connections have NPT threads for creating tighter seals than straight threads, and it is made of lead free brass, which is comparable in strength to stainless steel and more corrosion resistant. This class 125 fitting meets standards ASTM B-584-06 (C89833), ANSI B 1.20.1, and ANSI B 16.15 for quality assurance. Class is a standard relating to tolerance, construction, dimension, and wall thickness, but it is not a direct measurement of maximum working pressure. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The company, family-owned since 1937 and headquartered in Cleveland, OH, distributes pipe fittings in the United States and Canada.4. Chrome-Plated Brass Pipe Fitting, Nipple, Schedule 40, 3/8" NPT X 2" Length by Merit Brass
Feature
Nipple for connecting and extending pipesMale National Pipe Taper (NPT) threads for connecting female threaded pipes
Made from brass for higher corrosion resistance than steel
Relative softness of metal enables tighter seals and greater ease in installation
Meets standard NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and higher
Description
The Merit Brass nipple is a schedule 40 chrome-plated brass pipe fitting with male National Pipe Taper (NPT) threads for connecting and extending female threaded pipes. The fitting has NPT threads for creating tighter seals than straight threads and is made from Alloy 6061-T6 for increased corrosion resistance and strength. Made of brass with a high gloss, chrome-plated finish, this nipple is easier to clean than regular brass and more corrosion resistant than stainless steel. This fitting meets standard NSF/ANSI 61 for use with drinking water supplies of pH 6.5 and higher and standard ASTM B-687 for quality assurance.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.
5. Aluminum Pipe Fitting, Nipple, Schedule 40, 1/8" NPT Male X 2" Length by Merit Brass
Feature
Nipple for connecting and extending pipesMale National Pipe Taper (NPT) threads for connecting to female threaded pipes
Lightweight aluminum metal for less mass than other metals
Made from Alloy 6061-T6 for greater strength and corrosion resistance
Manufactured from pipes that meet specification ASTM B-241 for quality assurance
Description
The Merit Brass nipple is a schedule 40 aluminum pipe fitting with male National Pipe Taper (NPT) threads for connecting and extending female threaded pipes. The fitting has NPT threads for creating tighter seals than straight threads and is made from Alloy 6061-T6 for increased corrosion resistance and strength. This fitting meets specification ASTM B-241 for quality assurance.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The company, family-owned since 1937 and headquartered in Cleveland, OH, distributes pipe fittings in the United States and Canada.
6. Merit Brass m417h-32 Hex Head Plug, 2" NPT Male, MSS SP-114 304 Stainless Steel Cast Pipe Fitting
Feature
Square head solid plug for closing and terminating the end of a pipeMale National Pipe Taper (NPT) threads for use with female threaded pipes
Made of stainless steel 304 for greater strength than 302 grade steel
Square head for increased leverage and use with a wrench
Meets standards MSS SP-114, ANSI B1.20.1, and ASTM A351 for quality assurance
Description
These high quality stainless steel fittings are excellent for low-pressure applications where corrosion resistance is a concern. Our line of MSS SP-114 Class 150 stainless steel fittings are the highest quality in the industry. This is proven by the strict standards they meet: MSS SP-114 (for heat treating and material thickness) , ANSI B1.20.1, and ASTM A351. 304 MSS SP-114 fittings are a chromium-nickel material that offers very good corrosion resistance. 316 MSS SP-114 fittings offer a higher resistance to corrosion than 304 due to their nickel content along with the addition of molybdenum. Additionally, each fitting undergoes a thread test, pneumatic pressure testing, material composition analysis, and burrs are removed to avoid severing sealant and to prevent bad seals.7. Merit Brass Stainless Steel 316 Ball Valve, Two Piece, Full Port, Lever, 1-1/2" NPT Female
Feature
Made of stainless steel 316 for strength and resistance to corrosionLever handle with vinyl sleeve for manual on/off control
Full port flow for higher operating efficiency than standard port
Pounds per square inch (gauge) (psig) rating of 1,000 for water, oil, and gas (WOG) applications
Female National Pipe Taper (NPT) threads for use with male threaded pipes
Description
The Merit Brass two-piece full port ball valve is made of stainless steel 316 and has a lever handle and female National Pipe Taper (NPT) threaded connections on both ends. This stainless steel 316 valve, which is higher strength and more corrosion resistant than stainless steel 304, has a lever handle with a vinyl sleeve for manual on/off control. This ball valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the pipe it connects to enable maximum operating efficiency. The maximum pressure is 1,000 pounds per square inch (gauge) (psig) for use with water, oil, and gas (WOG) and the working temperature range is 0 - 400 degrees Fahrenheit. The valve is inline for connecting two pipes going in the same direction and has NPT threads on both ends for creating tighter seals than straight threads. Polytetrafluoroethylene (PTFE) reinforced seats and seals reduce the risk of valve leakage. This valve is for use with water lines, processing plants, and agricultural applications.
Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the balls position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.
Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. The company, family-owned since 1937 and headquartered in Cleveland, OH, distributes pipe fittings in the United States and Canada.
8. Stainless Steel 304/304L Pipe Fitting, Nipple, Schedule 80 Seamless Extra Heavy, 2" X 3" NPT Male by Merit Brass
Feature
Nipple for connecting and extending pipesMale National Pipe Taper (NPT) threads for connecting female threaded pipes
Made of stainless steel 304L for strength
Low carbon content to ensure greater resistance to corrosion
Meets specifications ASTM A733, ANSI B1.20.1, and ASTM A312/SA312 for quality assurance
Description
The Merit Brass nipple is a schedule 80 seamless extra heavy stainless steel 304/304L pipe fitting with male National Pipe Taper (NPT) threads for connecting and extending female threaded pipes. The fitting has NPT threads for creating tighter seals than straight threads. Made of seamless extra heavy stainless steel for increased strength, the lower carbon content of this 304L pipe fitting ensures corrosion resistance. Seamless pipe is produced from a solid piece of metal that is heated and moved over a form until the steel is shaped into a hollow tube. It can withstand pressure better than ductile or welded pipes. The nipple meets specifications ASTM A733, ANSI B1.20.1, and ASTM A312/SA312 for quality assurance.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.
9. Stainless Steel 304/304L Pipe Fitting, Nipple, Schedule 40 Welded, 2" X 2-1/2" NPT Male
Feature
Nipple for connecting and extending pipesMale National Pipe Taper (NPT) threads for connecting female threaded pipes
Made of stainless steel 304L for strength
Low carbon content to ensure greater resistance to corrosion
Meets standards ASTM A733, ANSI B1.20.1, and ASTM A312/SA312 for quality assurance
Description
The Merit Brass nipple is a schedule 40 welded stainless steel 304/304L pipe fitting with male National Pipe Taper (NPT) threads for connecting and extending female threaded pipes. The fitting has NPT threads for creating tighter seals than straight threads. Made of stainless steel 304L, the lower carbon content of this pipe fitting ensures corrosion resistance. It meets both 304 steel strength standards and 304L extra-low carbon standards for quality assurance.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).
Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.
10. Red Brass Seamless Pipe Fitting, Nipple, Schedule 40, 2" NPT Male X 5" Length
Feature
Nipple for connecting and extending pipesMale National Pipe Taper (NPT) threads for connecting female threaded pipes
Made from brass for higher corrosion resistance than steel
Made of Alloy 230 from seamless red brass pipe for greater strength and ease in machining than yellow brass
Manufactured to standard NSF/ANSI 61 for use in drinking water supplies of pH 6.5 and higher
Description
The Merit Brass nipple is a schedule 40 seamless red brass pipe fitting with male National Pipe Taper (NPT) threads for connecting and extending female threaded pipes. The fitting has NPT threads for creating tighter seals than straight threads. Made from seamless red brass for increased strength, this nipple is easier to clean than regular brass and more corrosion resistant than stainless steel. Seamless pipe is produced from a solid piece of metal that is heated and moved over a form until the steel is shaped into a hollow tube. It can withstand pressure better than ductile or welded pipes. This fitting meets standard NSF/ANSI 61 for use with drinking water supplies of pH 6.5 and higher and standard ASTM B-687 for quality assurance.
Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness.
Merit Brass manufactures pipe nipples following ISO 9001 standards for quality assurance. Family-owned since 1937, the company is based in Cleveland, OH. Merit Brass distributes pipe fittings to the United States and Canada.
