When you want to find chiller heater, you may need to consider between many choices. Finding the best chiller heater is not an easy task. In this post, we create a very short list about top 10 the best chiller heater for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 chiller heater:
Best chiller heater
1. Inkbird ITC-308 Digital Temperature Controller 2-Stage Outlet Thermostat Heating and Cooling Mode Carboy Homebrew Fermenter Greenhouse Terrarium 110V 10A 1100W
Feature
[Convenient Design] Plug and play design, easy to use. Support C/F display.[Dual Relay Output] Be able to connect with refrigeration and heating equipment at the same time.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
[Buzzer Alarm] High and low temperature alarms are available when the temperature is over or the sensor is with issue.
[Warranty & Safe] Warranty: 1 year. Maximum output load: 1100W(110V). It is with temperature calibration and compressor delay which can protect your refrigeration.
Description
Specification:Temperature Control Range: -50~99C / -58~210F
Temperature Resolution: 0.1C / 0.1F Temperature Accuracy: 1C (-50~70C) / 1F (-50~160F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V~240V AC
Buzzer Alarm: High and Low Temperature Alarm
Sensor Type: NTC sensor (Including)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Body Dimension: 140x68x33mm (5.5x2.7x1.3inch)
Socket Dimension: 85x42x24mm (3.3x1.7x1inch)
Ambient Temperature: -30~75C / -22~167F
Storage Temperature: -20~60C / -4~140F
Humidity: 20~85% (No Condensate)
Warranty: 1 Year
Package Included:
1x ITC-308 Temperature Controller
1x Manual
2. EVERSECU 72w 110-240v Aquarium Water Chiller Warmer/Cooler Temperature Controller for Fish Shrimp Tank Marine Coral Reef Tank Below 20L/30L Aquarium Chiller (20L Only Cool)
Feature
Quiet, low-power design.Simple Operation and obivious temperature display.
Suit for freshwater tank, water grass tank, sea water tank
The machine and the pumb have to be at the same height, the Machine and the surrounding space to maintain more than 10cm distance, in order to facilitate the flow of air circulation
Description
Specification:Model: Aquarium Water Chiller or Warmer and Cooler
Color: White, Green , Blue
Input AC: 110-240V , 50/60HZ
Power: 72W
Water Flow : 1-3L/min
Hmax: 3meters
Suit For Tube: 8mm Inside Diameter
Size: Approx. 11x11x19cm
Suit For Tank: Less than 20L
Package include:
1 x Aquarium Water Chiller OR Warmer and Cooler
Comes with a mini plug adapter.
3. Aquarium Thermostat Chiller Heater Adjustable Fish Tank +160GPH Water Pump
4. Temperature Controller Thermostat Inkbird Digital Heating and Cooling Outlet 1100W, 110V Aquarium Heaters,Reptile,Hatching etc. (ITC-308)
Feature
The top value of the controller is the current temperature. The bottom value is the set temperature.The temperature controller comes with two functions: heating and cooling. The two LEDs indicate whether it is heating or cooling.
The temperature controller is pretty easy to setup and simple to use: plug it in, set the temp ranges, place the probe, plug in the heater/cooler into the marked outlet.
The temperature controller maintains its settings even when the power is disconnected.
Centigrade or Fahrenheit selection
Description
Features:Temperature Control Range : -50~99 C / -58~210 F
Temperature Resolution: 0.1 C / 0.1 F Temperature
Accuracy: 1C (-50 ~ 70C) / 1F (-50 ~ 160 F)
Temperature Control Mode :On/Off Control, Heating and Cooling
Input Power: 100 ~240VAC, 50Hz/60Hz
Temperature Control Output: Max. 10A, 100V ~240V AC
Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
Socket: 85x42x24mm(3.3x1.7x1inch)
Sensor Length: 2m / 6.56ft
Input Power Cable Length: 1.5m (5ft)
Output Power Cable Length: 30cm (1ft)
Buzzer Alarm: High and Low Temperature Alarm
Temperature calibration
Over-temperature and sensor fault alarm
Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.
Sensor Type: NTC sensor (Including)
Ambient Temperature: -30~ 75 C / -22~ 167 F
Storage Temperature: -20~ 60 C / -4~ 140 F
Humidity 20~85% (No Condensate)
Warranty: 1 Year
It has certificate of EMC, LVD, RoHS, FCC compliance.
Package Content:
1x Temperature controller ITC308
1x Manual
5. Teco TK-1000 Tank Chiller, 1/4 HP w/ Built in Heater
Feature
The Teco TK-1000 Tank Chiller, 1/4 HP, features an internationally-recognized high-end compressor and titanium coaxial heat exchanger for high performance, low energy consumption and low noise levels.A unique feature of this chiller is the integrated 400 watt heater.
9 degree cooling up to 260 gallons. 39 degrees cooling for 55 gallon aquariums. Note: These temperature pull-down ratings are in ideal situations. We highly recommend purchasing a chiller one size larger than the specifications would lead you to believe is necessary.
Does not have a pump. The required flow through the chiller is between 132 gph and 211 gph.
Intuitive controller with extremely tight differential of 1F. Displays in F or C, and audible alarms for certain situations.
Description
The Teco TK-1000 Tank Chiller, 1/4 HP, features an internationally-recognized high-end compressor and titanium coaxial heat exchanger for high performance, low energy consumption and low noise levels. A unique feature of this chiller is the integrated 400 watt heater. 9 degree cooling up to 260 gallons. 39 degrees cooling for 55 gallon aquariums. Note: These temperature pull-down ratings are in ideal situations. We highly recommend purchasing a chiller one size larger than the specifications would lead you to believe is necessary. Does not have a pump. The required flow through the chiller is between 132 gph and 211 gph. Intuitive controller with extremely tight differential of 1F. Displays in F or C, and audible alarms for certain situations. Minimum Set Point 41F. Maximum Set Point 95. Dimensions: 12.2" x 12.2" x 18.03". 3/4" tube diameter In/Out Water Connection.6. Fish Tank Water Heater Chiller, 100-240V Water Cooling Heating Machine Thermostat for Aquarium 35L US Plug
Feature
Advantages and FunctionSemiconductor refrigeration, environmental protection without pollution. Mute, low-power design. Digital display and advanced microcomputer intelligent temperature control technology are adopted. Celsius temperature and Fahrenheit temperature switching function. Suitable for small-scale refrigeration heating, aquaculture, aquarium.DangerWhen installing a cold water machine or hand in the water, please be sure to unplug the power plug first;When the thunder comes, please unplug the power wipe head; To prohibit the use of wet hand plug, pull the power plug, otherwise it will cause electric shock or injury;Please use a dedicated power outlet, do not share the same socket with other high-power electrical appliances at the same time, avoid causing the current too large to cause fire.
Cleaning and maintenanceBefore cleaning and maintenance, please make sure that the power plug has been pulled out; Please use a clean and absorbent soft cloth to wipe the cover, the body and other parts to keep the appearance clean. (Note: please do not use a wet cloth to wipe the operation panel, plug and power cord.); Do not use corrosive liquid medicine and hard objects to clean the product. (detergent powder, gasoline, banana water, hard brush, etc.)
AttentionWhen in use, the product is forbidden to be inverted or horizontal;Pull off the plug, you must hold the plug handle, can not pull the power cord, or easy to damage the power cord;When handling, please unplug the power cord plug, Do not put in the high temperature environment (room temperature 36 above, fish tank bottom tank, sealed place, etc.), may cause the slow cooling or failure.
WarningPlease use AC220V or 110V power supply, please do not use other power supply (according to the different regions of the use of the power supply voltage is not the same, can not be universal, please note);This product is prohibited to be placed in a stable, high temperature, direct sunlight, smoke, ventilation, moisture in a large location;Prohibition block the vents. Do not store foreign objects near the vents;To prohibit the insertion of metal debris, wire, needle and other
Description
Water pipe connection operation procedure:
The 2M divided into two pipesLength can be determined according to their own use, respectively set tube buckles on the pipe, connecting the inlet and outlet pipe clamp the buckle fixed tightly connected to the pump and the power supply can be used directly.
1. Switch on the power, the water began to circulate, and see if there is any leakage.
2. Connect the power cord of the cold water machine, plug the power plug, press the power switch to turn on the power supply, the display screen will display the water temperature in the fish tank.
Temperature control setting method:
"SET"Light into set state, "Work"light water cooler to enter the working state
"SET"Set key,"ENTER"Confirm key,"+"Heating key,"-"Cool key
Short press "SET" key (set down the temperature), press the "+" or "-" key, to the appropriate temperature. (set after the "ENTER" key or 10 seconds after the automatic return to the current temperature)
Detailed function table:
1. This product is shown in the cooling water cooling water temperature is 28 , no high-power lights and submersible pumps to the water under the premise of the water temperature can be reduced to 25 or so, the higher the water temperature before cooling, the less the amount of cooling water applied.
2. Cold and warm type cold water machine hot water quantity in the process of making hot water and same as the refrigerating capacity of the refrigerating system.
3. The upper temperature limit of this product is 40 , the lower limit temperature of 0 .
Package includes:
1 x A Cold water machine
1 x The power adapter (10A )
1 x A water pump
1 x 1.5MM a power cordInternational three plug / Hong Kong three plug
1 x An inside diameter 8mm, long 2m pipe
2 x pipe buckles
7. EcoPlus 1/4 HP Chiller Fitting Kit (728700) Multipack of 3
Feature
EcoPlus 1/4 HP ChillerBrand Name: Eco Plus
Water Heaters Chillers Parts and Systems for Hydroponics
Package Contains: 3 Units
USA & Canada Warehouses, Fast Shippings
Description
Multipack of 3
The EcoPlus Chillers are suitable for use in reservoirs, hydroponic systems and fresh or saltwater aquariums. Each chiller provides a high performance titanium heat exchanger for optimum performance and corrosion resistance. High quality made compressor is extremely efficient and reliable. The micro computer with digital LCD display allows for easy operation. Fittings are 3/4 inch. 120V-60Hz/360 watts/3 amps. Pump Size: Minimum 264 GPH/Maximum 660 GPH. The micro computer with digital LCD display allows for easy operation. Use with a pump filter bag (product #728188 or #728190). Dimensions are 17.13 in W x 11.61 in D x 18.5 in H and weighs 42.5 lb.
8. TOOGOO 100-240V STC-200 Water Heater & Chiller Machine Thermostat for Fish Tank Aquarium(US Plug 35L 100W)
Feature
Mute, low-power design.Digital display and advanced microcomputer intelligent temperature control technology are adopted.Celsius temperature and Fahrenheit temperature switching function.Suitable for small-scale refrigeration heating,aquaculture, aquarium.pump flowSuitable.Water pump vertical lifting height of three meters below.Suitable Inside diameter eight millimeter.This product is shown in the cooling water cooling water temperature is 28 Celsius, no high-power lights and submersible pumps to the water under the premise of the water temperature can be reduced to 25 Celsius or so, the higher the water temperature before cooling, the less the amount of cooling water applied.Cold and warm type cold water machine hot water quantity in the process of making hot water and same as the refrigerating capacity of the refrigerating system.
The upper temperature limit of this product is 40 Celsius, the lower limit temperature of 0 Celsius.Water pipe connection operation procedure: The 2M divided into two pipes(Length can be determined according to their own use), respectively set tube buckles on the pipe, connecting the inlet and outlet pipe clamp the buckle fixed tightly connected to the pump and the power supply can be used directly.Switch on the power, the water began to circulate, and see if there is any leakage.
Connect the power cord of the cold water machine, plug the power plug, press the power switch to turn on the power supply, the display screen will display the water temperature in the fish tank. Please use AC220V or 110V power supply, please do not use other power supply (according to the different regions of the use of the power supply voltage is not the same, can not be universal, please note);
Warning: This product is prohibited to be placed in a stable, high temperature, direct sunlight, smoke, ventilation, moisture in a large location;Prohibition block the vents. Do not store foreign objects near the vents;To prohibit the insertion of metal debris, wire, needle and other foreign matter in the product interior or in the gap of the product.
Description
* TOOGOO is a registered trademark. ONLY Authorized seller of TOOGOO can sell under TOOGOO listings.Our products will enhance your experience to unparalleled inspiration.TOOGOO(R) 100-240V STC-200 Water Heater & Chiller Machine Thermostat For Fish Tank Aquarium(US plug 35L 100W)
Temperature control setting method: "SET"Light into set state, "Work"light water cooler to enter the working state."SET"Set key,"ENTER"Confirm key,"+"Heating key,"-"Cool key.Short press "SET" key (set down the temperature), press the "+" or "-" key, to the appropriate temperature. (set after the "ENTER" key or 10 seconds after the automatic return to the current temperature)
Symbol-Significance -Degrees Celsius-Degrees Fahrenheit-Factory Default
P0- Refrigeration / heating / cooling mode -C/H/CH-C/H/CH-C
P1-Return temperature - 0.1~15 - 0.1~27 - 2
P2-Correction temperature- -7~7 - -13~13 - 0
P3-Time delay (min)-0-10-0-10-3
P4-High temperature alarm temperature - -50~110 - -58~230 - 110
P5 - Temperature model (degrees Celsius and Fahrenheit) - CCCC/FFFF - CCCC/FFFF - CCCC
Sensor fault display E 1, close all outputs
colour: white
Material: plastic + metal
Model: STC-200
power: 100W
Cooling: 35L
Rated voltage DC12V
Cooling: 1-3L/min
Product size 115*110*190MM
Net weight 1.87KG
Plug Type: US Plug,it applies to Canada, India, Japan, Mexico, Thailand, the United States, the Philippines and so on.
Package Includes:
1 x A Cold water machine
1 x The power adapter (10A )
1 x A water pump
1 x 1.5MM a power cord
1 x An inside diameter 8mm, long 2m pipe
2 x pipe buckles
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
9. Aqua Auto AutoAqua Smart Temp Security - Heater or Chiller Safety Control
Feature
Plug&Play - AutomaticallyUnique magnetically coupled sensor
Extremely simple to set up
Auto time delay
Description
Smart Temp Security controls an aquarium heater or chiller within a range of 72 to 84. A magnetically coupled optical sensor mounts to most smooth surfaces up to 1/2 inch thick.10. Brazed 50 Plates Heat Exchanger and Wort Chiller,50 Plates Wort Chiller R 3/4" X 4,Stainless Steel Beer Chiller for Homebrew or Water Heater
Feature
High Quality Material - 304 stainless steel plates with 99.9% copper brazing. Allow wholesale business and custom business.Heat exchanger area of each plate: 0.012 square meter Designed pressure: 3.0mpa Max flow: 4m / h
HIGHLY CONDUCTIVE - Super-thin plates are designed for highly efficient cooling, from boiling down to chill within minutes! Save your water and time !
UL listed and CE certified for standards in manufacturing. GUOLI Plate chillers also come standard with a 1-year manufacturer warranty and a 30-day money back guarantee
Boiler Plate Heat Exchanger Applications - Domestic Hot Water Heating
Central Heating
Floor Heating
Driveway Snow Melting
Radiator Heating
Heating and Cooling HVAC Installation
Solar Heating
Description
* Design Temprature: -195C to +225C (-319F to 430F)*GUOLI Wort Chiller is highly efficient, fast cooling in a compact design which saves water and time .
* It's perfect in the lab, for beer brewing, or for any application that requires the exchange of heat between two fluids.
* Accommodating a high volume of liquid moving through the system quickly to boost the amount of heat transfer.
* Threaded Connections let you hook up to the compact device quickly.
* GUOLI plate heat exchange is widely used in heat exchanging fields like central air-conditioning, high-rise building pressure blocking, ice-storage system, heating domestic water, refrigerated containers, swimming pool constant temperature system, city central heating system, high-low temperature test chambers, thermos-recycling, heat pumps, water chilling units, oil cooling, water heaters, automotive parts factories, machine and hardware, injection molding machine and rubber manufacturers and household appliances factories.
* All of the heat exchanger could be customerized by you.
