When you want to find block erupter, you may need to consider between many choices. Finding the best block erupter is not an easy task. In this post, we create a very short list about top 8 the best block erupter for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 8 block erupter:
Best block erupter
1. Rev 2 GekkoScience 2-Pac Compac USB Stick Bitcoin Miner 15gh/s+ (BM1384x2)
Feature
15+gh/s mining speed(Higher speed requires usb port above spec)32-.35 watts per gh!
Completely silent operation
2x Bitmain BM1384 chips
2-pac is the name(2 chips one board) This is not a "2 pack" of miners, but a single miner with 2 chips.
Description
The most efficient USB miner ever manufactured is available in limited quantities! The 2-PAC Compac features 2 Bitmain BM1384 chips (same chip in S5) and a fully adjustable regulator design that gives you a core voltage range of 550mV to 800mV. Typical hasrate is 15+gh/s depending on clock rate. Efficiency is .31-.35 watts per gh. **NOTE** This is the "2-pac" usb miner. It is not a "2 pack" of usb miners. It is named 2-pac because it is a single miner with 2 asic chips, as opposed to 1.2. Block Erupter 49 Port USB 2.0 Hub 110/220V ATX
Feature
24-Pin ATX Power Supply (not included) uses 5V or 12V rail of PSUSupports 110 to 230 volts
49 Front facing Standard A USB ports (all ports support 480M Full Speed)
0.5 to 1A per port (9 mm distance per port)
Description
It is capable of supplying 0.5 to 1 amp per port. Brand new and in the original packaging.
Do not overload the hub with a power supply that is too strong or you risk blowing the 70A fuse. We suggest using a 350-400W 12V ATX power supply.
3. Antminer S7 ~4.73TH/s With 2 Fans @ .25W/GH 28nm ASIC Bitcoin Miner
Feature
Hash Rate: 4.73 TH/s 5%Power Consumption: 1293W 10%
Power Efficiency: 0.25 W/GH 10%
Built-in web interface for easy setup and configuration
Power supply not included, APW3++ recommended.
Description
1. Hash Rate: 4.73 TH/s 5% 2. Power Consumption: 1210 W (at the wall, with APW3, 93% efficiency, 25C ambient temp) 3. Power Efficiency: 0.25 J/GH (at the wall, with APW3, 93% efficiency, 25C ambient temp) 4. Rated Voltage: 12.0V+5%, should not be less than 12.0V 5. Chip quantity per unit: 162x BM1385 6. Dimensions: 301mm(L)*123mm(W)*155mm(H) 7. Cooling: 2x 12038 fan 8. Operating Temperature: 0 C to 40 C 9. Network Connection: Ethernet 10. Default Frequency: 600M4. ASICMiner Block Erupter USB 330MH/s Sapphire Miner
Feature
NO MOQ!Description
The Original Asic Miner, That Started it all! 3-Day Sale !!! No MOQ!5. CanaKit Raspberry Pi 2 Ultimate Starter Kit with WiFi
Feature
Includes Raspberry Pi 2 (RPi2) Model B Quad-Core 900 MHz 1 GB RAM8 GB Micro SD Card (Class 10) pre-loaded with NOOBS, CanaKit WiFi Adapter, CanaKit 2.5A Power Supply with 5 feet Micro USB Cable and Noise Filter (UL Listed)
High Quality Raspberry Pi 2 Case, Premium Quality 6.5 feet HDMI Cable, Heat Sink, CanaKit Full Color Quick-Start Guide
CanaKit GPIO to Breadboard Interface Board, Ribbon Cable, Breadboard, Jumper Wires, GPIO and Resistor Colors Quick Reference Cards
RGB LED, 8 x LEDs (Blue/Red/Yellow/Green), 15 x Resistors, 2 x Push Button Switches
Description
NOTE: The pre-programmed 8 GB MicroSD card may appear as 1 GB when inserted into a PC as it is pre-partitioned. The remaining space can be expanded as desired.The CanaKit Raspberry Pi Ultimate Starter Kit is covered by CanaKit's 1-Year Manufacturer Warranty offering hassle-free replacements.
An exclusive Ultimate Starter Kit from CanaKit that includes the fastest model of the Raspberry Pi family - The Raspberry Pi 2 Model B and everything you need to get up and running within minutes in the exciting world of Raspberry Pi!
The Ultimate Starter Kit includes everything in the Starter Kit plus all the components needed to start using the GPIO port of the Raspberry Pi 2.
The kit includes a Raspberry Pi 2 case as well as the recommended Raspberry Pi 8 GB Class 10 MicroSD Card pre-loaded with NOOBS. Just Plug and Play!
The kit also includes a CanaKit 2.5A Micro USB power supply (UL Listed) specially designed and tested for the Raspberry Pi 2. This power supply incorporates a noise filter to provide the highest stability.
Kit Includes:
- Raspberry Pi 2 (RPi2) Model B Quad-Core 900 MHz 1 GB RAM
- 8 GB MicroSD Card (Class 10) - Raspberry Pi Recommended MicroSD Card with NOOBS
- CanaKit WiFi Adapter / Dongle (RT5370 chipset)
- CanaKit 2.5A Micro USB Power Supply with Noise Filter (UL Listed) specially designed for the Raspberry Pi 2 (5 feet cable)
- High Quality Raspberry Pi 2 Case
- Premium Quality HDMI Cable with CEC support (6.5 feet cable)
- Heat Sink
- GPIO and Resistor Colors Quick Reference Cards
- CanaKit GPIO to Breadboard Interface Board
- GPIO Ribbon Cable
- Breadboard
- 32 x Jumper Wires
- RGB LED
- 2 x Red LEDs
- 2 x Green LEDs
- 2 x Yellow LEDs
- 2 x Blue LEDs
- 2 x Push Button Switches
- 10 x 220 Ohm Resistors
- 5 x 10K Ohm Resistors
- CanaKit Full Color Quick-Start Guide
6. Moonlander 2 USB Stick ASIC Miner for Scrypt Algorithm Cryptocurrencies
Feature
Easy to use and low cost USB based cryptocurrency miner for Litecoin, Digibyte, etcCurrently the most efficient and powerful USB miner available
Hashes between 3MH/s to 5MH/s with under 10 watts of power needed
Easy to use, and user adjustable clocks and voltages for the tinkerer
Can be run on Windows, Mac, and Linux (including Raspberry Pi!)
Description
The perfect holiday gift for your tech savvy friends!The FutureBit Moonlander 2 is an easy to use, low cost USB miner designed to introduce new users to the world of cryptocurrencies and mining. The Moonlander 2 is currently the most powerful and efficient USB miner available on the market today, allowing you to mine scrypt algorithm based coins like Litecoin, at a hashrate of nearly 5 MH/s* with under 10 watts of power.
The Moonlander 2 is built with the latest generation 28nm scrypt ASIC at its core, and uses the highest quality voltage controllers and components to ensure stable efficient 24/7 operation needed for cryptocurrency mining. It also features a fully custom designed pin heatsink and fan forced induction cooling solution, which is an industry first for a USB miner, and allows quiet cool operation at maximum frequencies with no external cooling solutions needed.
The miner is designed to run out of the box with no adjustments, but offers full clock and voltage control for people that love to tinker! The miner is very easy to use and setup, and you can get started with no previous mining experience needed. All you need a compatible Windows/Mac/Linux computer with a high powered USB port to get started!
Simply download the USB drivers, our mining software, plug in the Moonlander and you are ready to go! The Moonlander 2 works with most Windows 7/8/10 based systems, Mac OS 10.12 or greater, and most Linux based systems including Raspberry Pies!
Check out our Getting Started page to get up and running quickly at www.futurebit.io! You can also find more info and community feedback at our forum support thread. Linux based systems including Raspberry Pi!
*Moonlander 2 is a high powered USB device, and on most stock USB ports the maximum hashrate will be around 3 MH/s. For higher hashrate, you will need a dedicated powered USB Hub that can provide at least 2A of current per USB port.
7. GekkoScience 2PAC (Dual BM1384) USB Stickminer
Feature
15gh/s mining speed(Higher speed requires usb port above spec) 32-.35 watts per gh. Completely silent operation Bitmain BM1384 chipsDescription
The most efficient USB miner ever manufactured is available in limited quantities! The 2-PAC Compac features 2 Bitmain BM1384 chips (same chip in S5) and a fully adjustable regulator design that gives you a core voltage range of 550mV to 800mV. Typical hasrate is 15+gh/s depending on clock rate. Efficiency is .31-.35 watts per gh. New packaging and instructional sheet to be added with each order.TBC SALE 3-Days only! ENDS 10/06/17!!8. Asicminer Block Erupter USB 330mh/s-336mh/s Sapphire Miner
Feature
The BlockErupter Sapphire USB series is the second major product of ASICMINER.Serves as a replacement of GPUs for the mining hobbyists.
Speed: 330Mh/s-336Mh/s! With Great Stability and very Low HW errors!
Power Usage: Only 500mA - 510mA, 2.5w, per Usb.
Beautiful Green LED, To Show when Powered, and blinks while hashing.
