When you want to find voltage booster, you may need to consider between many choices. Finding the best voltage booster is not an easy task. In this post, we create a very short list about top 10 the best voltage booster for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 voltage booster:
Best voltage booster
1. Yosoo High Voltage Transformer DC 3v-6v to 400kV Boost Step-up Power Module High-voltage Generator 400000V
Feature
input voltage: DC 3 V to 6 VInput current: 2 A - 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm.To avoid burning, use the time limit for 1 minute.
Description
Notice:
the high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package included:
1 * DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator
2. Boost Voltage Converter, DROK 1500W Voltage Regulator Booster DC 10V-60V 12V Step Up to DC 12V-90V 24V 30A Power Supply Module High Power Volt Transformer Circuit Board with Cooling Fan
Feature
DROK boost voltage converter input voltage range is DC 10-60V, continuously adjustable output voltage range is DC 12-90V, max output current is 20A, more than 15A please enhance heat dissipation.Application: DIY a power supply, 12V can input and output can 12-50V adjustable; as the car power supply, charge for your laptop, PDA or a variety of digital products; Solar panel regulator etc.
Protection: the step-up power regulator is designed with input over-current protection, battery low voltage protection, input MOS reverse polarity protection, short circuit protection.
Speacial Design: the voltage transformer is equipped with thickening radiator and intelligent temperature control cooling fan.
Note: it is necessary to lower the battery protection voltage, no matter using the battery, switching power supply, solar panel, or generator etc as the input source, otherwise it will damage the battery and power module.
Description
DROK 1500W Boost Voltage Converter
Parameters:
Module type: non-isolated step-up module (BOOST)
Input voltage range: DC 10V~60V
Input current: 10~30V input voltage, maximum current 30A; 31~60V input voltage, maximum current 25A
Static operating current: 15 mA (when 12V step up to 20V, the higher the output voltage, the current will increase)
Output voltage: 12~90V continuously adjustable (default 19V)
Output current: 20A MAX, more than 15A please enhance heat dissipation
Constant current range: 0.8~20A (0.3A)
Temperature: -40~ + 85(if the ambient temperature is too high, please enhance heat dissipation)
Operating frequency: 150 KHz
Conversion efficiency: 92% ~ 97%
Protection: input over-current protection, battery low voltage protection, input reverse polarity protection, short circuit protection
Installation: 4 x 3 mm screw holes
Module size(L*W*H): 130 x 52 x 85 mm
Applications:
1. DIY a power supply, input 12V and output can be adjustable to 12-50V.
2. Charge for your electromobile.
3. As the car power supply, charge for your laptop, PDA or a variety of digital products.
4. DIY a notebook mobile power supply: with 12V big-capacity lithium battery pack, get your notebook on anywhere.
5. Solar panel regulator.
Package Including:
1 x Power Converter Module
3. RioRand 5 Pack Boost Converter Module XL6009 DC 3.0-30 V to DC 5-35 V Output Voltage Adjustable Step up Circuit Board 4A
Feature
XL6009 is a high-performance 400KHz 4A switch currency step-up (BOOST) module. This module is coming with the 3rd generation high-frequency switch technology as the core chip, The performance is much higher than LM2577Wide input voltage: 3V~32V;Optimum operating voltage range: 5~32V;Wide output voltage: 5V~35V
With 4A high efficiency MOSFET switches, the efficiency of XL6009 can be up to 94%(LM2577current is 3A)
With ultra high switch frequency 400KHz , even if small capacity filtering capacitors can achieve very good results, ripple is smaller (Compared to LM2577,its frequency is 50KHz)
Package Content : 5*DC-DC Step Up Boost Module
Description
Attention: Do not plug this booster to your project before adjusting the potentiometer Technical Parameters: Model: XL6009 boost module Module Properties: Non-isolated boost (BOOST) Rectification: Non-Synchronous Rectification Input Range: 3V ~ 32V Output Range: 5V ~ 35V Input Current: 4A (max), no-load 18mA (5V input, 8V output, no-load is less than 18mA. Higher the voltage, the greater the load current.) Conversion efficiency: less than 94% (greater the pressure, the lower the efficiency) Switching frequency: 400KHz Output Ripple: 50mV (the higher the voltage, the greater the current, the greater the ripple) Load Regulation: +/-0.5% Voltage Regulation: +/-0.5% Operating Temperature: -40 degree to +85 degree (strengthen heat dissipation while ambient temperature exceeds 40 degrees) Body Size: 4.3 x 2.1 x 1.2cm/1.7" x 0.8" x 0.47"(L*W*T) Net Weight for 1 pc: about 10g Input way: IN+, IN- Output way: OUT+, OUT- Test Comparison Sample Reference: Input 3V Output 12V 0.4A 4.8W Input 5V Output 12V 0.8A 9.6W Input 7.4V Output 12V 1.5A 18W Input 12V Output 15V 2A 30W Input 12V Output 16V 2A 32W Input 12V Output 18V 1.6A 28.8W Input 12V Output 19V 1.5A 28.5W Input 12V Output 24V 1 A 24W Vin * Iin * Efficiency = Vout * Iout Vin: Input Voltage Iin: input current Vout: Output Voltage Iout: output current Package Content : 5*RioRand DC-DC Step Up Boost Module4. Gowoops 2PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage
Feature
Convenient for DIY -- You can use this module to DIY an output-adjustable car power supplyInput voltage: DC 10V-32V, Output voltage: DC12V-35V(adjustable)
Input current: 16A (MAX), Output current: 10A (MAX)
Conversion efficiency: 94% (For reference: when Input 19V 2.5A Output 16V)
Easily charging for 60W, 90W etc. laptops which is less than 150W, industrial grade ( -40 degree to + 80 degree) work temperature, suitable for AC adapter, power supply and so on
Description
Featrure:
Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45
Conversion efficiency: 94% (For reference: when Input 19V 2.5A Output 16V)
Output Ripple: 2% (MAX) 20M-bandwidth
Operating Temperature: Industrial (-40 to +85) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation)
Full load temperature rise: 45
No-load current: 25mA typical
Voltage regulation: 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
Input Reverse Polarity Protection: None (please comply with a reverse protection or connect a diode at input parts)
Specifiction:
Input voltage: DC 10V-32V
Output voltage: DC12V-35V(adjustable)
Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
Output Current: 10A (MAX)
Output power: natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power
Module Properties: non-isolated step-up module (BOOST)
Size: 65mm x 35mm x 21mm
Package Includes:
2 x 150W Boost Converter
5. Buck Boost Converter Display, DROK Buck-Boost Board DC 5.5-30V 12v to DC 0.5-30V 5v 24v Adjustable Constant Current Voltage Step UP Down Voltage Regulator 3A 35W Power Supply Module
Feature
DROK buck-boost converter input voltage range is DC 5.5-30V; output voltage range is DC 0.5-30V, can be arbitrary adjustable; output current range is 0-3A, can be arbitrary adjustable, if enhance heat dissipation, it can reach 4A; max output power is 35W, if enhance dissipation, it can reach 50W.LCD Display: the voltage regulator module is designed with LCD, can display input and output voltage, output current and output power; voltage display resolution is 0.05V, current display resolution is 0.005A.
Safe Protection: the volt transformer board is with reverse connection protection at input terminal, reverse connection will not burn; stop the current from feeding back protection at output terminal; short circuit protection.
Application: the switching power supply can be used as an ordinary buck-boost module with over-current protection; used as a battery charger; used as a high-power LED constant current driver module.
Button Control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.
Description
Parameters:
Input voltage range: DC 5.5-30V (when the input voltage is 5V, the boost and buck can be achieved, but the voltage and current measurement is inaccurate; under 4.7V, under voltage protection will be activated)
Output voltage range: DC 0.5-30V
Output current: can stably work at 3A for a long time, when enhance heat dissipation can reach 4A
Output power: 35W (natural cooling), when enhance heat dissipation can reach 50W
Voltage display resolution: 0.05V
Current display resolution: 0.005A
Conversion rate: about 88%
Soft start: Yes, (a large power load module may fail when it is started)
Input reverse connection protection: yes
Output stop the current from feeding back protection: yes
Short circuit protection: yes
Working frequency: 180KHZ
Size: 66 * 48 * 21mm
Mounting hole: 4mm in diameter
Package Including:
1x Buck Boost Converter Module
6. XCSOURCE DC 3.7V-7.4V to 1000kV Boost Step-up Power Module High-Voltage Generator 1,000,000V TE656
Feature
This high-voltage generator module is based on the principle of Tesla coil.This small high efficiency module can release high-voltage pulse output with simple external circuit power supply.
Ideal for students to study electrical experiment, do science experiment, etc.
Input: 3.7V - 7.4V / 4A
Output Voltage: 800KV - 1000KV
Description
Features:This high-voltage generator module is based on the principle of Tesla coil.
This small high efficiency module can release high-voltage pulse output with simple external circuit power supply.
Ideal for students to study electrical experiment, do science experiment, etc.
Specifications:
Model: MC-901
Dimension: 88.5 x 26mm (LxD)
Input Voltage: DC 3.7V - 7.4V
Input Current: 4A
Input Wire Length: 10cm (RED & Green/White Wire)
Output Voltage: 800KV - 1000KV (Please be careful when using)
Output Current: 0.5A
Output Wire Length: 16cm
Discharge Time: 10s
Arc distance/High voltage discharge distance range: 15mm - 20mm
Power supply: 1x 3.7V Lithium Battery, 2x 3.7V Lithium Batteries in series(such as 18650 Battery), NiCd/NiMH Batteries, 4V/6V Lead-acid Batteries, etc. (6V battery is Recommended for the best effect)
Input Wiring:
Red - Positive
Green/White - Negative
Notes:
1. The high-voltage module should not be powered on when it is under high voltage no-load status. (Power must be adjusted to a suitable distance to the high-voltage output line, battery capacity and voltage is proportional to the high voltage arc distance)
2.During the experiment, please test the arc distance from short to long, DO NOT exceed the maximum arc distance, or the high voltage energy might not be released and it may easily damage the module.
3. The input voltage will affect the output voltage and Arc distance.
4. The power of the module is large and the heat dissipation inside is weak. Please let the module work intermittently, continuous work no longer than 1 minute. Improper voltage and long working hours may easily damaged the module.
Package Includes:
1 x 3.7V to 1000KV Step-up Power Module Generator
7. Gowoops 5PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage
Feature
Convenient for DIY -- You can use this module to DIY an output-adjustable car power supplyInput voltage: DC 10V-32V, Output voltage: DC12V-35V(adjustable)
Input current: 16A (MAX), Output current: 10A (MAX)
Conversion efficiency: 94% (For reference: when Input 19V 2.5A Output 16V)
Easily charging for 60W, 90W etc. laptops which is less than 150W, industrial grade ( -40 degree to + 80 degree) work temperature, suitable for AC adapter, power supply and so on
Description
Please choose the original seller: Gowoops, we don't guarantee the quality of the products bought from other seller.
Featrure:
Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45
Conversion efficiency: 94% (For reference: when Input 19V 2.5A Output 16V)
Output Ripple: 2% (MAX) 20M-bandwidth
Operating Temperature: Industrial (-40 to +85) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation)
Full load temperature rise: 45
No-load current: 25mA typical
Voltage regulation: 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
Input Reverse Polarity Protection: None (please comply with a reverse protection or connect a diode at input parts)
Specifiction:
Input voltage: DC 10V-32V
Output voltage: DC12V-35V(adjustable)
Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
Output Current: 10A (MAX)
Output power: natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power
Module Properties: non-isolated step-up module (BOOST)
Size: 65mm x 35mm x 21mm
Package Includes:
5 x 150W Boost Converter
8. DROK LM2577 DC Boost Power Converter 3-34V to 4-35V 3A Adjustable Step Up Voltage Regulator Board
Feature
It is a high efficiency non-isolated boost module, the output Voltage can't be less than input VoltageInput Voltage: DC 3-34v; output Voltage: DC 4-35v(continuously adjustable)
Input current: 3a(max); output current: 2 5a(max)
Connection: welding, pin can be soldered directly to the PCB
Multiple application such as DIY an output adjustable mobile power, boost charger, charge your electronic devices, etc
Description
Features:Module Properties: non-isolated step-up module
Input voltage: DC 3-34V
Output voltage: DC 4-35V (adjustable)
Input Current: 3A (MAX)
Output current: 2.5A (MAX)
Output power: natural cooling 15W, heat sink 25W(MAX) (heat sink is not included)
Conversion efficiency: 90%
Operating Temperature: Industrial (-40c to +85c) (if ambient temperature exceeds 40c, lower power use, or enhance heat dissipation)
Full load temperature rise: 45c
No-load current: Typical 15mA (5V to 12V)
Load regulation: +/- 0.5%
Voltage regulation: +/- 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
Input Reverse Polarity Protection: None (Please Series diode at the input port.)
Installation: You can screw (diameter 3 mm), 2 fixing holes
Connection: Welding, pin can be directly soldered to a PCB
Conversion efficiency(for reference only):
In 3.7V Out 5V/1.0A 81%
In 5.0V Out 12V/0.5A 84%
In 7.4V Out 12V/0.5A 90%
In 7.4V Out 12V/1.0A 88%
In 12V Out 16V/1.0A 92%
In 12V Out 16V/2.0A 90%
In 12V Out 19V/1.0A 91%
In 12V Out 19V/1.5A 92%
In 12V Out 24V/0.5A 89%
In 12V Out 24V/1.0A 88%
Package Includes:
1x DC Converter
9. Hughes Autoformers RV2130-SP Voltage Booster/Surge 30 Amp
Feature
30 AMP- 3,00 Watts capacity, 2,400 Joules of Advanced Surge Protection Built-in with indicator lightFully automatic 10% voltage boost when needed, Boost indicator light when needed
Complete LED Park Power Diagnostics
Replaceable Surge Protection Unit
Voltage Booster & Surge Protection in One Package, Cable Lock with key and digital volt meter included
Description
Introducing the World's Only "All-in-One" RV Power Solution. The legendary, original, and patented RV voltage booster, now with the world's most advanced surge protection. The all new Hughes Autoformer Booster with Surge Protection has the same performance and reliability of the Hughes Autoformer Voltage Booster now with advanced surge protection in one package. The surge / spike protection unit is also replaceable. In the event of a massive spike, the surge unit will take the hit ensuring your booster and more importantly, your RV stays safe. Installs into your RV electrical system (with the optional internal mounting installation kit sold separately) or plugs into the park's power pole. The Hughes Autoformer is the only U.S patented Voltage boosting solution available today. All others are imitations.10. DC Boost Step Up Power Module High Voltage Generator DC 3v-6v To 20kV
Feature
input voltage: DC 3 V to 6 VInput current: 2 A- 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
ship by ePacket with tracking number, take 7-17 days. track in the usps
Description
Description:input voltage: DC 3 V to 6 V
Input current: 2 A- 5 A
High pressure type: the type of pulse current
Output voltage: 400000 v(Please pay attention to safety)
High pressure discharge distance between: 10 mm - 20 mm
The output high voltage wire length: 100 mm
Input power cord length: 100 mm (the red line is positive)
Wiring:
Red and green power connection red line:"+" green line "-"
output : the other side ,same color cable
lease notice:
the high-voltage module should avoid the use of electricity in high voltage no-load . (Power must be adjusted to a suitable distance to the high-voltage output line , battery capacity is proportional to the distance and the use of the high-pressure arc ( not a voltage as high as possible , you must provide enough current ) . Experimental test of the arc distance from short to long , Do not exceed the maximum arc distance electricity, energy can not be released due to high pressure , can easily damage the module. )
Work: intermittent , continuous work does not allow more than 1 minute and the output side does not allow shorting . Improper voltage and long working hours easily damaged module
Package includes:
1 * DC 3v-6v to 400kV 400000V Boost Step-up Power Module High-voltage Generator
