When you looking for shutter fan, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable shutter fan is not an easy task. In this post, we show you how to find the right shutter fan along with our top-rated reviews. Please check out our suggestions to find the best shutter fan for you.
Best shutter fan
1. Iliving ILG8SF10V Wall-Mounted Variable Speed Shutter Exhaust Fan, 10"
Feature
10 inch variable speed shutter exhaust fan with automatic ShuttersUL listed with speed controllable, permanently lubricated motor
Corrosion-resistant with OSHA compliant wire guards
Variable speed functionality with the purchase of the iLIVING ILG8SFSC speed controller. Speed controller sold separately
120 Volts, 1/25 HP, 0.55 amp, 1580 rpm, 600 CFM
Description
The iLIVING shutter exhaust fan is perfect for removing excess heat, moisture, and unpleasant odors from virtually any commercial location, including restaurants, factories, warehouses, barns, and greenhouses. This fan features aluminum blades, OSHA compliant wire guards, and automatic shutters that open and close in tandem with the operation of the fan. The completely enclosed motor is thermally protected and permanently lubricated. The fan comes fully assembled out of the box; only installation required is the electrical hardwire. The shutter fan comes in 8 different sizes: 10 inch, 12 inch, 16 inch, 18 inch, 20 inch, 24 inch, 30 inch, and 36 inch; the 18 inch shutter fan has both a variable Speed ILG8SF24V and a single Speed model. The iLIVING 30 inch and 36 inch shutter fans are only available in single Speed. For variable Speed models, the iLIVING ILG8SFSC Speed controller is sold separately.2. VES 24" Exhaust Shutter Fan, Wall Mount, 3 Speed
Feature
Exhaust Fan, Industrial GradeOSHA Compliant on Intake side
9' Cord, Rough Opening: 24.5" x 24.5"
5850 CFM on High, 1/4 Hp
Description
These SF shutter exhaust fans have a totally enclosed motor and comes complete with built in speed switches and a 9' cord. no electrician is required, just mount the fan in the wall and plug it into an approved receptacle. the corrosion resistant aluminum shutter comes complete with a tie bar to reduce shutter flapping and keep the shutters closed when the fan is not running. on the intake side of the fan the balanced aluminum blade is protected by a strong painted grill.Features:
built in speed switch with 9' cord attached
comes totally assembled out of the box
totally enclosed maintenance free motor
corrosion resistant aluminum shutter with tie bar to reduce shutter flapping and opening on windy days
safety painted grill on intake side meets osha standards
Motor features:
csa/csa-us approved
50/60 hz
f class insulated
follow nema standards either 48 or 56 frame
dupont nomex insulation
rotors have been balanced to reduce noise vibration and prolong life
motor enclosures have been machined to <0.5mm to reduce rotor shaft play
csa/csa-us for an ambient temperature of 40c but will stand up to 65c (149f)
copper windings rated at h class
bearing specifications - 40c to 140v c
capacitor rating 450vac, 10,000 hours for extended life
silicon steel rotors and stators
Applications:
designed for agricultural, horticultural,factories, warehouses, garages, attics and restaurants
remove and control unwanted condensation
exhaust obnoxious fumes
exhaust excessive heat
improve inside air quality
3. Fantech 2SHE1221 Series 12" Shutter Mount Exhaust Fan
Feature
All ventilators are UL 705 Standards listedHeavy duty guards have gray polyester coating to resist corrosion
OSHA compliant guards
Totally enclosed motors
Speed controllable
Description
Shutter mounted exhaust fans are widely used for ventilating warehouses, stores, factories, workshops, greenhouses and farm buildings. Shutter frames with pre-punched mounting holes allow for easy installation.4. MaxxAir IF14UPS 1400-CFM 14-Inch Blade Heavy-Duty Exhaust Fan with Integrated Shutter, Wall Mounted Exhaust fan
Feature
INDUSTRIAL EXHAUST FAN: This MaxxAir 14" Industrial Exhaust Fan is a powerful fan that can be used in garages, barns, greenhouses, and a variety of other locations.THERMALLY PROTECTED FAN: The fan has 2 OSHA-compliant features including a safety grille and a fully enclosed, thermally protected, PSC energy efficient motor.
EXHAUST FAN WITH SHUTTER: The exterior shutters close tightly to prevent a draft when not in operation and open automatically when powered on. It helps remove unwanted odors, contaminants, excess moisture or heat.
HEAVY DUTY EXHAUST FAN: The housing is made of galvanized steel which prevents rust and has pre-drilled holes for easy mounting. Rolled flange edges offer handling protection during installation.
EXHAUST FAN WARRANTY: This heavy duty exhaust fan has 1 year limited warranty. The shutters open and close automatically. Fans do not come with electrical plugs. Requires wiring to your building's electrical system.
Description
Specification:Warranty: 1 year
Overall Dimension: 13 x 18 x 18 inches
Item Weight: 27 pounds
Color: Silver
Style: Traditional
Material: Steel
Voltage: 120 V
Air Flow Capacity: 1400 CFM
This MaxxAir 14" Industrial Exhaust Fan is a powerful fan that can be used in garages, barns, greenhouses, and a variety of other locations. The fan is well suited to ventilate many types of substances from dust to humidity, excluding hazardous chemicals or fumes. The fan has 2 OSHA-compliant features including a safety grille and a fully enclosed, thermally protected, PSC energy efficient motor. The exterior shutters close tightly to prevent a draft when not in operation and open automatically when powered on. The housing is made of galvanized steel which prevents rust and has pre-drilled holes for easy mounting. Rolled flange edges offer handling protection during installation.
5. TPI Corporation CE14-DS Direct Drive Exhaust Fan, Shutter Mounted, Single Phase, 14" Diameter, 120 Volt
Feature
Shutter mounted 3-speed exhaust fan for use in exterior ventilation2 amp, 120 volt, single phase, 1/8 horsepower, permanently lubricated, totally closed ball bearing motor with permanent split capacitor
Self-closing shutters protect the fan from rain when not in operation
Three aluminum paddle blades attached to a steel hub and spider assembly for durability
Junction box included for direct wiring to wall switch
Description
This TPI Corporation CE 14-DS single phase 14-inch diameter direct drive exhaust fan has a built-in shutter mechanism and is suitable for ventilating a building to the outside. The blade assembly (consisting of a steel hub and spider) holds the fan heads three aluminum paddles, which are enclosed by front steel spiral wire guards for strength. The built-in shutter mechanism allows the fan to be installed without external framing, and the self-closing shutters protect the fan from rain and snow when not in operation. The permanent split capacitor (PSC) motor provides both starting torque and the ability to run at variable speeds. The motor of the TPI direct drive exhaust fan is totally enclosed, making it suitable for use in conditions that standard, unenclosed motors are not, such as in the presence of dust or other airborne debris.
Specifications
| Motor | 3-speed, 2 amp, 120 volt, single phase, 1/8 horsepower, permanently lubricated, totally closed ball bearing motor with permanent split capacitor |
| Switch type | Pull chain |
| Cord | No cord, junction box provided for direct wiring |
| Blades | Aluminum (3) |
| Blade guards | Steel spiral wire |
| Cubic feet per minute (CFM) | 1520 / 1400 / 1250 |
| Weight | 17 lbs. |
| Dimensions | 17.125 x 17.125 x 13.305 inches (H x W x D) |
H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Industrial fans are used in workplace environments to exhaust fumes or direct air flow. Most industrial fans have coated metal parts and lubricated motors that are permanently sealed to help protect against environmental hazards, such as dirt and airborne debris or corrosive fumes. They can have fan blade cages that meet workplace safety standards, as well as a variety of mounting mechanisms for precise placement to direct large volumes of air flow. Electronic circuitry for industrial fans matches the power specifications found in the workplace and provides the initial torque needed to start up a large blade fan. Industrial fans are used in warehouses, gyms, and other commercial environments to ventilate spaces and to circulate air.
TPI Corporation manufactures industrial and commercial electrical heaters, process heat ovens, ventilation products and fans, lighting equipment, and thermostatic controls. The company, founded in 1950, is headquartered in Johnson City, TN.
6. Professional Grade Products 9800512 Metal Shutter Exhaust Fan for Garage Shed Pole Barn Hydroponic Ventilation, 10"
Feature
Comes with power cordPainted for protection and corrosion resistance
10 inches in Diameter
Motor located outside the air stream
403 CFM fan with a low power motor
Description
Shutter mounted exhaust fans are widely used for ventilating stores, offices, factories, shops and farm buildings. They exhaust when needed and then the shutter automatically closes to stop infiltration of air when the fans are not operating.7. Professional Grade Products 9800394 Shutter Exhaust Fan for Garage Shed Pole Barn Hydroponic Ventilation, 265 CFM, 6"
Feature
6" Fan Blade that Produces 265 CFM at only 25 WattsMade with Moisture Resistant Plastic and Painted Shutter
Easily to Install with Power Cord Included
Great for Ventilation of Small Rooms and Buildings
Shipped Fully Assembled
Description
Shutter mounted exhaust fans are widely used for ventilating stores, offices, factories, shops and farm buildings. They exhaust when needed and then the shutter automatically closes to stop infiltration of air when the fans are not operating.8. J&D Manufacturing VES24C ES Aluminum Shutter Fan, 24" Size, 115V, 1/2 hp, 1 Phase, Variable Speed, 10' Cord , Chrome
Feature
Variable Speed Fan requires separate variable speed control to adjust fan speedComes totally assembled out of the box
Models with cord have 3-prong plug and are pre-wired for 115 Volts. No electrician required!
Balanced 3 bladed aluminum prop with a zinc plated steel hub
Chrome guard allows for easy cleaning and meets OSHA 1910.212(a)(5) requirements to mount at any height on inlet side of fan
Description
This J&D Manufacturing ES Shutter Fan, model VES24C, is 24" in Size, 115 Volts, 1/2 HP, 1 Phase, Variable Speed, comes with an Aluminum Shutter, and With a 10' Cord. J&D Manufacturings ES Shutter Fan is a durable agriculture grade exhaust fan perfect for barn and building peaks, greenhouses, warehouses and more. ES Shutter Fans are available without a cord, or pre-wired with a cord and plug for No Electrician Required installation. Fans ship fully assembled out of the box so youre up and running in no time!9. Cool Attic CX242DDWT Drive Drive 2-Speed Whole House Fan with Shutter, Exhaust Fan, 24-Inch
Feature
WHOLE HOUSE FAN: The cool attic 24 in. belt drive 2-speed whole house fan is designed for houses with 1,800 sq. ft. attics. It offers an efficient way to reduce cooling costs, while keeping your whole house more comfortable. It features a powder coated finish for weather resistance.ATTIC FAN: It works by pulling fresh air in from the outside and expelling the warm air up into the attic and pushing it out through your attic exhaust vents. This unit requires a minimum of 8 - 10 sq. ft. of net free exhaust vent area to perform quietly and efficiently.
DIRECT DRIVE FAN: Dual, self-aligning ball bearing mechanisms, and precision-balanced 4-blade aluminum fan assembly, contribute to quiet, reliable performance and longevity. This unit requires a minimum of 8-10 sq. ft. of net free exhaust vent area to perform quietly and efficiently. 30-inch white, powder coated finish automatic shutter has 95% plus air closure
FAN WITH SHUTTER: It has Joist-in/joist out installation with steel venturi for enhanced durability. It ensures CFM high and low ratings at 4600 and 3200 to effectively ventilate single story single family sized homes. Re-engineered bracing system creates a more stable motor mount, is stronger than tube-style bracing, and virtually eliminates vibration. It provides proper ventilation of attic space.
EXHAUST FAN: It has precision-balanced aluminum fan blade assembly with 4 blades with CFM of 4,600/3,200, 2-speed, thermally protected PSC motor for 2,000 - 3,000 square feet on one story and Left Bowl Length is 14.9. High/low/off wall switch is included.
Description
Specification: Overall Dimension: 39.4 x 36 x 15.7 inches Item Weight: 46 pounds Color: White Size: 24-Inch Horsepower: HP Warranty: 10 Years The cool attic 24 in. belt drive 2-speed whole house fan is designed for houses with 1,800 sq. ft. attics. It offers an efficient way to reduce cooling costs, while keeping your whole house more comfortable. It works by pulling fresh air in from the outside and expelling the warm air up into the attic and pushing it out through your attic exhaust vents. This unit requires a minimum of 8 to 10 sq. ft. of net free exhaust vent area to perform quietly and efficiently. Dual, self-aligning ball bearing mechanisms, and precision-balanced 4-blade aluminum fan assembly, contribute to quiet, reliable performance and longevity. The 2-speed whole house fan offers an efficient way to reduce cooling costs by pulling fresh air in from the outside, expelling the warm air up into the attic, and pushing it out through your attic exhaust vents. Dual, self-aligning ball bearing mechanisms and a precision-balanced 4-blade fan assembly contribute to quiet, reliable performance and longevity.10. Broan 433 Automatic Shutter for 353 and 35316 Gable Mount Attic Ventilator
Feature
Allows more air movement than conventional stationary attic louversCounter-balanced aluminum vanes open automatically when ventilator is turned on and close when fan stops
Flange fits flush against outside wall for neat and smooth appearance
Reinforced for strength and provides weather tight closure
The frame material is fabricated from.080-6063-T6 extruded aluminum, The louvers are fabricated from.016-3105-H28 aluminum coil
For use with Broan models 353 and 35316 attic ventilators
