When you want to find hydraulic steering kit for boat, you may need to consider between many choices. Finding the best hydraulic steering kit for boat is not an easy task. In this post, we create a very short list about top 10 the best hydraulic steering kit for boat for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 hydraulic steering kit for boat:
Best hydraulic steering kit for boat
1. Baystar Kit, HK4200A-3, Hydraulic Steering Kit with Compact Cylinder with 20' Tubing
Feature
Gives 5 wheel turns lock-to-lock when using BayStar outboard cylindersKit Includes: (1) BayStar helm pump (HH4314-3) (1) BayStar cylinder (HC4645H) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438)
Also includes (1) BayStar tubing kit (HT4420H, 2 x 20' hoses)
Description
Gives 5.2 wheel turns lock-to-lock when using BayStar outboard cylinders Kit Includes: (1) BayStar heim pump (HH4314-3) (1) BayStar cylinder (HC465H) (1) BayStar tubing kit (HT4420H, 2 x 20' hoses) (2) Hydraulic steering fluid (HA5430) (1) Filler kit (HA5438)2. Winibo ZA0301 Marine Outboard Hydraulic Steering System for Boats with Helm Pump, Hydraulic Cylinder and Tubing
Feature
outboard hydraulic steering kitDescription
1. pump, cylinder, 2 hose above 8meters are included. 2. Suitable for moder less than 90hp 3. Bore diameter: 25mm 4. piston rod diameter: 14mm 5. 5 plungers 6. suitable for steering wheel in diameter of 320 to 460 mm 7. Handover to handover: 5 times3. SeaStar HK7514A-3 PRO 2.0 Hydraulic Kit Kevlar Reinforced (Hoses Included), 14'
Feature
Hydraulic Steering Kit with 14' SeaStar PRO (1500 psi) Kevlar reinforced, Factory swaged HosesDesigned for critical high speed performance applications like bass and flat boats, SeaStar Pro is the ultimate steering system for high-speed single engine outboards
Updated System includes Positionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing and NEW End Gland Sealing System for maximum protection from saltwater and compression set
Packaged Complete with helm, cylinder, hoses, fittings, oil, bleeder kit and detailed instructions.Compact helm has only a 4-7/16" footprint - needs only 3" dash hole (tilt requires larger hole)
INSTALLATION NOTE: Do NOT attempt to install an NPT pipe fitting into a -3 helm hose fitting port. Doing so will lead to irreparable damage to the helm
Description
One of the top selling recreational marine Hydraulic Steering Systems for Outboard powered boats from the leader in marine steering technology, SeaStar Solutions (formerly Teleflex Marine).
The HK7514A-3 Steering System includes HC6345-3 Pivot Mount PRO Cylinder with Positionable Stainless Steel O-Ring (ORB) Fittings for easy Hydraulic Hose Routing along with keyed support brackets to prevent racking of the cylinder, HH5770-3 PRO Helm with updated ORB Fittings and Anodized Protection to saltwater, two 14 SeaStar PRO Kevlar Reinforced Hoses which provide very low thermal expansion properties and are kink and abrasion resistant, two Quarts of SeaStar HA5430 proprietary Hydraulic Steering Fluid for maximum performance and protection along with Installation Instructions.
Components in the HK7514A-3 meet ABYC and NMMA certification standards and are designed and manufactured in North America.
This Steering Kit is ideal for high-performance boats with single non-power-assisted outboards up to 300 HP, especially those capable of speeds over 60 MPH, which demand maximum steering control and comfort. It is suitable for use with high-performance propellers and jack plates.
Upgrade Options to Consider:
Stainless Steel Bulkhead Hose Fittings
Tilt Steering
SeaStar Power Assisted Steering
SeaStar Products are backed by a two-year recreational user warranty against manufacturing defects. SeaStar Hydraulic Steering Systems are tested and certified using only SeaStar Hydraulic Fluid and SeaStar Hydraulic Hoses. Use of non-certified products to install SeaStar products may VOID warranty and could cause loss of steering control.
4. Uflex HYTECH 1.0 Hytech 1.0 Hydraulic Outboard Steering Kit
Feature
Maximum Horsepower: 150hpHelm: UP20 F Front mount
Turns Lock-to-Lock: 5
Steering Wheel: Sold separately
Steering Wheel Shaft: 3/4" tapered
Description
The Hytech steering kit features a unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine. The Hytech is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower engines and under. Coupled with the composite UP20 helm, the Hytech system offers effortless steering with five turns lock to lock. And, it is applicable to almost all two- and four-stroke outboard engines. This kit includes the UP20 helm, UC94 cylinder, two quarts of OIL 15, and 40' of cut to length tubing.5. Hydrodrive Hydraulic Steering System for Boat Till 120 HP MF115MRA
Feature
Outboard Hydraulic System for engines up to 115-120 HPPump with Automatic Pilot Connection, Engine Arm (BR72) included.
Output force: 236 Kg
Torque: 51 Kgf
Max speed: 50 Kts (90 km/h)
Description
MF115MRA Outboard Hydraulic steering system for engines till 120 HP Hydraulic pump: TL1-16 MRA, 16 cc pump, with NON-RETURN valve 4,5 turns Hydraulic cylinder: MC 90 W, 69 cc volume, stroke 206mm, 16" Hose set, 1 lt. hydraulic oil (ATF III G) (temp.+60/-30.) BR72 Engine arm with fork included Output force: 236 Kg Torque: 51 Kgf Max speed: 50 Kts (90 km/h) Excellent quality, innovative technology. Universal fittings, Hydrodrive steering can be use every type of outboard engines. Easy to install - Step by step book on video for installing Italian design - Made in EU. Delivery time 4-7 days by TNT/Fedex6. SeaStar HK6400A-3 1.7 Hydraulic Steering Kit without Hoses
Feature
Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mphUpdated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set
Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort ; Cylinder: 8.3 cubic inches
Robust Barrel Design and NEW Graphics compliment new boats and motor packages
Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel
Description
The top selling recreational marine hydraulic steering system for outboard powered boats from the leader in marine steering technology SeaStar Solutions (formerly Teleflex Marine).
The HK6400A-3 SeaStar Hydraulic Steering System includes the following:
HC5345-3 outboard steering cylinder with O-ring boss rotational fittings for easy hydraulic hose routing (hoses sold separately)
HH5271-3 helm with updated O-ring boss fittings and anodized protection to saltwater
Two quarts of SeaStar HA5430 proprietary hydraulic steering fluid for maximum performance and protection
Installation Instructions
The HK6400A-3 SeaStar Hydraulic Steering System is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also compatible with SeaStar Power Assist pump (PA1200-2) that provides an automotive feel to driving your boat with fingertip control.
SeaStar products are backed by a two-year recreational user warranty against manufacturing defects. The HK6400A-3 hydraulic steering system meets ABYC and NMMA certification standards and is designed and manufactured in North America.
SeaStar hydraulic steering systems are tested and certified using only SeaStar hydraulic fluid and SeaStar hydraulic hoses. Use of non-certified products to install SeaStar products may void warranty and could cause loss of steering control.
7. Outboard Specialty Tools Bubble Purge Hydraulic Steering Bleed and Purge Kit for Seastar OST-PBB.001
Feature
Our patent pending purge kit offers professional bleed and flush capability at a fraction of the price for Seastar, Baystar and Uflex hydraulic steering systems.Self contained, designed for maximum efficiency and minimal mess
One person can operate our system end to end, easy to use, comes with complete instructions
No pin holes needed! System remains sealed during purge process! Helm fill and cylinder attachment quick connects designed not to leak.
Ships with full easy to follow instructions and you will always have access to our dedicated tech support to help with any questions you may have!
Description
The Bubble Purge Kit may be the cleanest, easiest and most efficient bleed system in existence. Kit comes with detailed instructions and the following parts: Fill Tube Attachment, Cylinder Bleed Attachment and Helm Fill Fittings. Components securely connect to the helm and cylinder. Not intended for use with power assist pumps, autopilot systems, twin cylinder with liquid tie bar systems. Please contact Outboard Specialty Tools Support for any questions!8. Woqi ZA0350 Hydraulic Outboard Steering Kit with Helm Pump, Compact Cylinder, Tubing
Feature
Outboard Hydraulic Steering Kit For Mercury up to 300HpSingle Station Steering For Boats Rated To a Maximum of 300HP (Total)
Steering kit for Mercury
Hydraulic Steering kit
Marine Steering system
Description
*Suitable for model up to 300hp For Mercury only) * Cylinder, pump and two tubes are included *Bore diameter:35mm Piston rod diameter:19mm Plunger number: 7 Handover to handover: 5.5times9. SeaStar HH5271-3 Front Mount 1.7 Hydraulic Marine Steering Helm
Feature
Convenient front of dash fill which can be retrofitted into an old SeaStar 4.5" hole cutoutPositionable Stainless Steel O-Ring (ORB) Fittings for easy hose routing
Compact helm has only a 4-7/16" footprint and needs only a 3" dash hole
4.9 turns lock-to-lock in most typical single cylinder outboard applications
INSTALLATION NOTE: Do NOT attempt to install an NPT pipe fitting into a -3 helm hose fitting port. Doing so will lead to irreparable damage to the helm
Description
SeaStar helm pumps are the product of many years of research and experience by the worlds foremost builder of manual hydraulic steering systems, SeaStar Solutions (formerly Teleflex Marine).
Superior design, teamed with the finest materials, precision manufacturing and rigid quality control have resulted in a design which represents the ultimate in efficiency, safety and reliability, yet is easy to install and maintain. The SeaStar HH5271-3 Front Mount 1.7 Hydraulic Helm offers smooth, efficient No Feedback Steering for single and multi-outboard engines up to 350 HP (700 HP combined for counter rotating twins) for speeds up to 60 MPH.
The HH5271-3 meets ABYC and NMMA certification standards and is designed and manufactured in North America.
This helm is ideal for cruisers, runabouts, center console boats, offshore fishing boats and many more. It is also suitable for speeds up to 60 MPH.
Upgrade Options to Consider:
Stainless Steel Bulkhead Hose Fittings
Tilt Steering
SeaStar Power Assisted Steering
SeaStar products are backed by a two-year recreational user warranty against manufacturing defects. SeaStar hydraulic helms are tested and certified using only SeaStar hydraulic fluid and SeaStar hydraulic hoses. Use of non-certified products to install SeaStar products may void warranty and could cause loss of steering control.
10. Hydrodrive Outboard Hydraulic Steering System Till 90 HP MF90W
Feature
Outboard Hydraulic system for engines up to 90 HPOutput force: 236 Kg
Torque: 51 Kgf
Max speed: 35 Kts (65 km/h)
3 years of warranty