When you looking for ethernet tester cat 7, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable ethernet tester cat 7 is not an easy task. In this post, we show you how to find the right ethernet tester cat 7 along with our top-rated reviews. Please check out our suggestions to find the best ethernet tester cat 7 for you.
Best ethernet tester cat 7
1. Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking
Feature
Professional Wire Tracker. It can help you quickly find the target line in many pairs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line and other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item.Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester.
Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers.
Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state.
Additional Earphone & Equipped Lamp. In a noisy environment, you can put on the earphones to accurately find the target cable through comparing the strength of "beep beep" sound. Adjust the volume knob to make the volume proper and avoid being interfered. At night or in a dark environment, you can turn on the illuminating lamp, which can be helpful during operating.
Description
This instrument is a multifunctional handheld cable testing tool. Work perfect when RJ11 RJ45 cable is on power. It has a wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wiring engineering, and network maintenance person.General Technical Parameters
Operating temperature: 0 - 40 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Storage temperature: -10 - 50 degrees Celsius, maximal 80 percent relative humidity (non-condensing)
Altitude: less than 2000m
Anti-explosion rating: IP40
Distance of emitting signal: 300m or so
Emitter battery: 6F22 / 9V (not included).
Receiver battery: 6F22 / 9V (not included)
Specification Parameter
Product weight: 0.180 kg
Package weight: 0.270 kg
Product size: 20.00 x 4.00 x 3.00 cm / 7.87 x 1.57 x 1.18 inches
Package size: 22.50 x 12.20 x 4.70 cm / 8.86 x 4.8 x 1.85 inches
Scope of application: Education,Home appliance,Industrial,Market,Office,Supermarket
What's In The Box?
1 x FWT11 Emitter
1 x FWT11 Receiver
1 x Clip Adapter Cable
1 x RJ11 Adapter Cable
1 x User Manual
2. Cable Tester, VDV Scout Pro 2 Traces and Tests Coax, Data, Telephone Cable with Remotes Klein Tools VDV501-823
Feature
Kit includes: 1 Scout Pro 2 Tester, 1 self-storing remote, 5 LanMap RJ45 Location Remotes, 5 CoaxMap F-connector Location Remotes, 1 coax barrel F adapter, manual and 9V batteryIncludes voltage warning, shield detection, auto power off, low battery indicator and a self-storing remote
Tests voice (RJ11/12), data (RJ45) and video (F-connector) coax connections
Utilize the 5 LanMap and 5 CoaxMap Location Remotes to identify cable runs
Test for open, short, miswire or split-pair faults
Trace cables, wire pairs and individual conductor wires with the Tone Generator (requires analog probe Cat. No. VDV500-060, sold separately)
Compatible with Test-n-Map Remotes that test, map and ID multiple cable runs in a single step
Description
The VDV Scout Pro 2 Tester Kit is a versatile voice/data/video cable tester that locates and tests coax, data and telephone cables. Identify multiple cable runs with included remotes. With this kit, you can ensure fast and accurate cable installations each time.. Kit includes: 1 Scout Pro 2 Tester, 1 self-storing remote, 5 LanMap RJ45 Location Remotes, 5 CoaxMap F-connector Location Remotes, 1 coax barrel F adapter, manual and 9V battery. Includes voltage warning, shield detection, auto power off, low battery indicator and a self-storing remote. Tests voice (RJ11/12), data (RJ45) and video (F-connector) coax connections. Utilize the 5 LanMap and 5 CoaxMap Location Remotes to identify cable runs. Test for open, short, miswire or split-pair faults. . Compatible with Test-n-Map Remotes that test, map and ID multiple cable runs in a single step. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.3. Zoostliss Network Cable Tester RJ45 RJ11 RJ12 UTP LAN Cable Tester Networking Tool
Feature
Keep your network running smoothly by testing your cables to uncover problematic shorts, open wires, crossing pairs and other wiring mishapsUse for testing your homemade Ethernet patch cables to make sure they are in working order prior to connecting to your devices
Tests RJ45 cables, RJ11 telephone cables and network cables. Requires one 9-volt battery (not included)
Easy to read LED display indicates problems.Hand-held for portability.
If you do not like our products, we accept 30 days return and 60 days replacement, please feel free to contact us if you face any problems
Description
Features:Following are abnormal connections:
If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.
If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.
If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.
If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.
If test cables of the same axes, BNC turns on when the cable works.
9V reduplicated battery is used in this tester. Battery is advised to change if any weak light appears.( Battery is not included.)
Color: white
Main tester
Size: 105*67*28mm
Weight: 74g
Remote tester
Size: 105*38*28mm
Weight: 47
4. Docooler 4-in-1 Network Cable Tester Remote RJ11 RJ45 USB BNC LAN Cat5 Cat6 Phone Cable Tester Meter
Description
Features:RJ-11/RJ-45 are equipped with 50u gold plating.
300 feet test distance (RJ-45/RJ-11/BNC).
Ergonomic portable handheld design.
Powered by a 9V Alkaline battery. (Not included)
Convenient battery access.
Low Battery Indicator.
Simple one button test.
Fast speed testing.
With a soft leather bag for carrying.
High quality warranted.
Specifications:
Cable Tested:
UTP and STP LAN cables, terminated in RJ-45 male connectors (EIA/TIA 568);
RJ-11 cables with male connectors, 2 to 6 conductors installed;
USB cables with Type A flat plug on one end and type B square Plug on other end;
BNC cables with male connectors
Faults Indicated: No Connections, Shorts, Opens and Crossover
Low Battery Indicator: LED lights to indicate low battery
Power: 1 x 9 V 6F22 DC Alkaline Battery (Battery Not Included)
Color: Grey
Item dimensions: Appox. 162 x 85 x 25mm (6.38 x 3.35 x 0.98 inch)
Item weight: 164g (Battery excluded)
Package dimensions: 225 x 110 x 43 mm
Package weight: 215g
Item Includes:
1 x 4-in-1 Network Cable Tester
1 x Far End Remote Jack (USB RJ45 RJ11) (Attached to the main unit)
1 x BNC Remote Jack
1 x Carrying bag
1 x Instruction Manual
5. TRENDnet Network Cable Tester, Tests Ethernet/USB & BNC Cables, Accurately Test Pin Configurations up to 300M (984 ft), TC-NT2
Feature
Comprehensive cable tester for network professionalsTests Ethernet, USB, and BNC cables
Accurately test pin configurations for cable lengths up to 300 meters (984 ft.)
Identifies severed, short circuit, and cross connected pins
Continuous scan and manual scan modes
Includes BNC to Ethernet converters
Handy travel case
1 Year TRENDnet Manufacturer's Warranty
Description
TRENDnets Network Cable Tester, model TC-NT2, is a comprehensive cable tester for network professionals. It accurately checks pin configurations for Ethernet cables, USB cables, BNC cables, and patch panel ports. The TC-NT2 identifies proper, severed, short circuit, and cross connected pins for cable distances of up to 300 meters (984 ft.). All components fit into a handy travel case.
PACKAGE CONTENTS
TC-NT2
Quick Installation Guide
2x RJ-45-to-BNC adapter
Network patch cable
Carry pouch
6. iMBAPrice - RJ45 Network Cable Tester for Lan Phone RJ45/RJ11/RJ12/CAT5/CAT6/CAT7 UTP Wire Test Tool
Feature
Automatically runs all tests and checks for continuity, open, shorted and crossed wire pairs. Visible LED status display.Cable state testing (2-wire): Line DC detecting, anode and cathode determination,Ringing signal detecting open, short and cross circuit testing
Cable Type: RJ11 Telephone cable and RJ45 LAN cable
Connectors: Ethernet Cat 5, Ethernet Cat 5e, Ethernet Cat 6, Ethernet Cat 7, RJ11 6P and RJ45 8P
Power Source: DC9V Battery Required (not included)
Description
With iMBPrice continuity tester you can check LAN patch cable (RJ45) and telephone cable (RJ11) for pass, open, short or cross wire. You can quickly test cables using scan mode, or step mode to check connection one contact at a time. Detachable remote unit allows you to test wires already installed. Pop a 9-Volt battery(Not Included) in and you're ready to test the connection to any room in your home or office!7. Tacklife CT01 Classic Wire Tracker RJ11 RJ45 Multifunction Wire Tracker Toner Ethernet LAN Network Cable/Telephone Line Tester for Network Cable Collation, Telephone Line Test, Continuity Check
Feature
MULTIFUNCTION WIRE TRACING - Fast to locate the breakpoint without wire's cover damage, find the required line among numerous ones, and also can track the IN -WALL cables, perfect for tracking RJ11, RJ45, cables or other metal wire (via adapter)and also with the Battery10V-110V positive and negative measurements functionNETWORK & TELEPHONE LINE TEST - It testes physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection. Use the emitter to test the status of working of telephone lines (such as judging TIP or RING line), test the line level, positive and negative polarity detection; adjust the volume of receiver by pressing the volume rotary knob
SMART DESIGN & INDICATOR & FLASHLIGHT- ABS design allows these buttons can stand wear and tear and easy to rotate. And portable size for easily carrying. The low voltage LED to indicate the lower battery voltage to change the power off battery timely and the LED flashlight allows operation in dark situation
EARPHONES DESIGN - with a pair of Earphone, you can just connect the earphone to the headset jack of receive to get clear information in a noise environment; Notice that if the sound is low, you should check whether the battery is powered off or not
PACKAGE CONTENT - Tacklife CT01 Wire Tracker Emitter, Tacklife Wire Tracker Receiver, RJ45 Adapter Cable, Crocodile Adapter Cable, 9V Batteries, Earphone, Black Case, English User's Manual, 24-Month Warranty - Ideal Gift for Father's Day
Description
Tacklife - Professional team on Amazon, which only deals with the development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life.
Features:
Easy to operate and professional
Flexible interface, multifunction
Smart design
Light touch switch,saving energy and power.
Indicator and sound reminding.
Main functions:
Wire Tracing
Network Cable Collation
Telephone Line Test
Continuity Checking
Test and level, postive and negative polarity
Judge short-circuit, breaking circuit, open circuit and crossing.
Low Battery Capacity Indication
General Technical Parameters:
Operating temperature: 0F ~ 104C, maximal 80% relative humidity (non-condensing)
Storage temperature: 14F ~122F, maximal 80%.
Altitude: <2000m (meter)
Anti-explosion rating: IP 40
Distance of emitting signal: >3000cm
Safety class: IEC61010-1 600V CAT III, pollution class II
Battery transmitter: 6F22/9V
Battery receiver: 6F22/9V
Package Contents:
1 x Tacklife Wire Tracker Emitter
1 x Tacklife Wire Tracker Receiver
1 x RJ45 Adapter Cable
1 x Clip Adapter Cable
2 x 9V Batteries
1 x Earphone
1 x Black Case
1 x User's Manual
1 x 2-year Warranty
Safety Note: Electricity shock may happen when voltage exceed 30V AC or 60 V DC.
8. HDE RJ45 RJ11 RJ12 Cat5 Cat6 UTP Network Cable Tester for LAN Phone Wire Test Tool
Feature
Construct your own patch cables? Test them with this!Works with Twisted-Pair, Straight & Crossover Cables: RJ-45 & RJ-11
This cable tester comes apart so you can test even when the cable's ends are in different rooms
Requires one 9-volt battery (not included)
Tester detects if wires are connected correctly; Includes travel case & instruction sheet
Description
Not sure what's wrong with your network? Before you buy an expensive replacement router or cable modem, test your cables! If the wires are broken (and you know how those cables get snaked around the house) the tester will detect it. If you make your own patch cables and want to test that the wires are correctly assigned, then you need this! Test your twisted pair, Straight, Crossover, Cat 5 / Cat 5e / Cat 6 / UTP cables with RJ-11 or RJ-45 connectors. Insert the battery, turn on the tester, and connect one end of the cable to the Master side and the other end to the Remote side. The lights indicate problems (if any) with wires in the cables. A very useful item for the networking enthusiast!9. Tonor TM RJ45 RJ11 RJ12 CAT5 CAT 6 UTP Network Lan Cable Tester Test Tool
Feature
Keep your network running smoothly by testing your cables to uncover problematic shorts, open wires, crossing pairs and other wiring mishapsUse for testing your homemade Ethernet patch cables to make sure they are in working order prior to connecting to your devices
Tests RJ45 cables, RJ11 telephone cables and network cables
Easy to read LED display indicates problems.Hand-held for portability.
Requires one 9-volt battery (not included)
Description
Features:Following are abnormal connections:
If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tester and remote tester will not turn on.
If several cables are not connected, several lights will not turn on respectively. If less than two cables are connected, none of the lights is on.
If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:
Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding lights is on.
If test patch panels or wall plate outlles, two cables which can match each other (RJ45) will be connected to the tester.
If test cables of the same axes, BNC turns on when the cable works.
9V reduplicated battery is used in this tester. Battery is advised to change if any weak light appears.( Battery is not included.)
Color: white
Main tester
Size: 105*67*28mm
Weight: 74g
Remote tester
Size: 105*38*28mm
Weight: 47
