When you looking for vise grips table, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable vise grips table is not an easy task. In this post, we show you how to find the right vise grips table along with our top-rated reviews. Please check out our suggestions to find the best vise grips table for you.
Best vise grips table
1. YOST VISES LV-4 Home Vise 4-1/2" (1 Pack)"
Feature
Home Work Shop ViseO Swivel base allows rotating the vise 240-Degree for versatility
Holds 0.6" D to 1.85" D pipes and tubes
Jaw width 4-1/2"
Jaw opening 3"
Description
The Yost LV-4 is a 4-1/2-Inch swivel base vise is ideal for home shop. The vise is manufactured from cast iron featuring steel vise jaws, threaded spindle assembly and a chrome lockdown. The vise can be rotated up to 240-Degree on its base for work positioning. The built in pipe jaws allow holding small pipes and tubes ranging in diameter from 0.6"D to 1.85"D. The vise is painted with a durable blue powder coat.2. MAXXHAUL 80356 Hitch Mount Vise Plate/Holder (with Adjustable Height)
Feature
Height can be adjusted to desired height for comfortability; Height adjust range: 18" in 2" incrementVise mount plate dimensions: 7-7/8" L x 7-7/8" w
Vise mounting holes: 5/8" x 2"
Comes with anti-rattle device for added stability
Overall dimensions: 22"long 7-7/8" wide x 22-5/8" high
Description
Use our MaxxHaul Hitch Vise Plate or Vise Holder to add portability to your vise so you can take it to your job site, remote location and other areas where bench top mounting is not possible. Hitch Mount Vise Plate features heavy duty all steel construction for strength and is finished with a powder coat to resist rust and corrosion for added durability. This vise holder fits any standard 2" x 2" hitch receivers. Must remove vise before putting vehicle in motion.3. Yost Vises 455 5.5" Heavy-Duty Utility Combination Pipe and Bench Vise, Blue
Feature
Bench-mount vise with 5.5" nominal jaw width and 0.125"- to 2.5"-diameter pipe capacity provides clamping action for light-duty applications360-degree swivel base adjusts the direction of the jaws for proper placement and locks in place
Vise has a cast iron body with steel U-channel bar for durability and has a flat portion that acts as an anvil and additional work surface
Replaceable top jaws and permanent pipe jaws are grooved for enhanced grip
Rubber washers prevent the handle from unwanted sliding
Description
The Yost Vises Apprentice series utility combination pipe and bench vise has a 180-degree swivel base and mounts to a workbench to provide clamping action for light-duty applications. The 180-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the lock knob on the base secures its position. The vise has a cast iron body with steel U-channel bar for durability and has a flat portion that acts as an anvil and additional work surface. The hardened steel top jaws can be replaced when worn, and the built-in cast iron pipe jaws are grooved for enhanced grip. The top jaws can be replaced when worn. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise4. Bessey - BESSEY BV-VB BVVB Vacuum Base Vise,Silver
Feature
Swivel head enables you to tilt and rotate the workpieceVacuum base holds onto smooth non porous surface firmly
V-grooved jaws are designed to grasp circular objects0
5. Vise Universal Rotate 360 Work Clamp-on Vise Table Vise, 3"
Feature
Data:Net weight 3.7 lbs, Maximum width of jaw opening 3.0 inch, Jaw width 2.75 inch;Wide range of applications: V60 vise is ideal for small parts such as home, jewelry, hobbies, model making, electronics, etc., providing clamping for light applications. Round, square and other shaped part can be processed;
Flexible use: Rotate the control handle to rotate the vise body to the desired position, and move the rotary control handle to firmly fix the vise body. The vise body can be rotated 360 on its base, even if you are used to the left hand, there will be no hindrance. It is very convenient to disassemble and install;
Durable: The jaws are quenched and normalized to increase the hardness and toughness of the jaws and are durable;
Non-slip design: The anti-slip texture on the inner side of the jaws increases the clamping force of the jaws, and does not slip; it lays a good foundation for your smooth completion.
6. Yost Tools COV-3 Clamp-On Vise, 3" (1 k)
Feature
Clamp force: 660 lbs. and Torque rating: 15. 5 Ft-LbJaw Width: 3" x Jaw Opening: 2. 1" x Throat Depth: 1. 57"
Minimum Tube Capacity: 0. 39" D, Maximum Tube Capacity: 0. 75". Pipe jaws are cast-in place
Clamp-on base feature works almost anywhere
Able to attach to tables up to 1. 96" thick
High-strength 30, 000 psi castings
0. 46D machined steel main screw with triangular M12*1. 75 threads
0. 25"D x 3. 16 long plated steel screw and handle
0. 9" x 1. 0 anvil shaping surface incorporated into vise design
No additional hardware needed, ready to use following mounting to work surface
7. 3'' Jaws Aluminum Table Bench Top Vise Vice Universal Swivel Clamp-On (1)
Feature
Table Bench Top Vise Vice3'' Jaws Aluminum
Universal Swivel Clamp-On
8. Wilton CBV-100 Super-Junior 4 Vise with Clamp On Swivel Base (63247)
Feature
VERSATILITY: Swivel base model rotates 45 left or right.STABILITY: Double lockdowns ensure immobility.
SMOOTH OPERATION: Enclosed design keeps contaminants out and lubrication in.
JAW OPENING: 2-1/4"
GROOVED AND REPLACEABLE TOP JAWS
9. Fasmov Swivel 3" Universal Table Vise Tilts Rotate 360 Universal Work
Feature
The Table Vise will not deform even under high pressure, the vise is made of cast aluminum, the jaws are made of hardened high-carbon steel alloy, and the movable parts are made of precision milled heat-treated chromium plate carbon steel.Jaws are 3" x 3/4" / 79mm x 17mm with a 2" / 51mm opening, the clip has a wide enough opening for any workbench or table.
Adjustable and rotates to any possible angle, rubber Jaws for no scratch and firm clamping, enabling you to lock the workpiece in any position.
Rubber on the jaws can be removed to reveal a cross pattern for use on wire/rods, The overall design of pliers has laid a good foundation for the smooth completion of your work.
Lightweight, small vise, easy operation, Ideal for holding small parts in Jewelry, Hobby, Model making, Electronics and more.
10. Housolution Universal Table Vise 3 Inch, 360Swivel Base Bench Clamp Home Vise Clamp-On Vise Repair Tool Portable Work Bench Vise for Woodworking, Cutting Conduit, Drilling, Metalworking - Black
Feature
Universal Table Vise: Maximum opening of jaw is up to 3 inch/77.5mm, jaw width 2.75 inch/70mm, this bench clamp fits most workbench, and kinds of thickness of tables. 0.2 inch/5mm thickened jaw provides superior grip.High Quality Casting: Made of high-grade cast steel and chrome-plated spindle and nuts, this table vice offers long-term durability and heavy duty gripping. The jaw adopts quenching and re-fire technology to increase its hardness and strength. The clamping force of the jaw is 300kg.( NOTE: It is not recommended to increase the lever force, or extend the lever length of the screw rod, or excessive pressure on the screw rod, otherwise it is easy to cause the jaw to break.)
360 Degree Swivel Base: The throat capacity is up to 2.4 inch/61mm. Build in 360 dergree swivel base, perfect for a wide range of clamping angles. Even if you are a left-hander, you can rotate the vise to the position that suits your work.
Wide Applications: This clamp is designed for home, workshop, professional use, general purpose and light work, ideal for woodworking, cutting conduit, drilling, gluing, metalworking, sanding or planing, sawing, etc. It can be used indoors or outdoors.
Easy to Install: The oval swivel base design is convenient and quick to install on or remove from kinds of workbench. Non-slip textured surface increases the grip force of jaw, which firmly hold the material, save time and effort when you work. (Note: The table board up to 2.4 inch/61mm thick can be clamped.)
