Finding the best timber chisel suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best timber chisel
1. IRWIN Tools Marples Woodworking Chisel, 2-inch (51mm) (M4442N)
Feature
Long blade and slim, contoured polypropylene handle provides increased leverage for added control, precision, and comfort.High carbon solid-forged hardened steel blade for superior performance and maximum edge retention.
These wood chisels are designed for use with a wooden mallet or the palm of the hand.
IRWIN Tools Marples chisels have been the industry leader for woodworkers for nearly 200 years.
2. Robery Sorby 287 1 Heavy Duty Timber Framing Corner Chisel 9-3/8 Blade, 9-1/8 Ash handle, 18-1/2 Overall
Feature
This massive 1 inch corner chisel is useful for large framing work when cleaning out corners on large mortisesComes with a 9-3/8 inch blade and a 9-1/8 inch Ash handle. Overall length is 18-1/2 inches.
Has a traditional bolster, double steel hoops and leather shock washer
Forged from special Sheffield steel to ensure a perfect balance of toughness, edge retention and sharpness
Each chisel is diamond hardness tested before leaving the factory
3. 1" Robert Sorby #285 Timber Framing Chisel
4. Narex 50 mm (2 Inch) Woodworking Cabinetmaker's Chisel with Beech Handle 810150
Feature
Made by a small tool manufacturer in the Czech RepublicBlade is made from fine-grained, nicely tempered chrome-manganese steel and hardened to Rc 59
50 mm (2") wide blade
Bevel ground at a 25 degree bevel.
Handle made from laquered Beechwood
5. Arno 467863 Solid Steel French Timber Framing Slick Chisel 35 mm (1-3/8 Inch) Wide x 14 Inches Long RC 58-60 PVC Dipped Handles
Feature
Slick is 35 mm wide (1-3/8") x 14" long, weighs 25 ouncesThese chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
The handles are bent up a few degrees from the back of the chisel allowing use as slicks
The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
6. Arno 467849 Solid Steel French Timber Framing Slick Chisel 5 Piece Set with 20, 25, 30, 35 and 40 mm Wide Chisels RC 58-60 PVC Dipped Handles
Feature
5 piece set with sizes: 20, 25, 30, 35 and 40 mm, lengths range from 10-1/2 to 14"These chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
The handles are bent up a few degrees from the back of the chisel allowing use as slicks
The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
7. Arno 467870 Solid Steel French Timber Framing Slick Chisel 30 mm (1-1/8 Inch) Wide x 14 Inches Long RC 58-60 PVC Dipped Handles
Feature
Slick is 30 mm wide (1-1/8") x 14" long, weighs 17 ouncesThese chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
The handles are bent up a few degrees from the back of the chisel allowing use as slicks
The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
8. Arno 467887 Solid Steel French Timber Framing Slick Chisel 25 mm (1 Inch) Wide x 12 Inches Long RC 58-60 PVC Dipped Handles
Feature
Slick is 25 mm wide (1") x 12" long, weighs 14 ouncesThese chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
The handles are bent up a few degrees from the back of the chisel allowing use as slicks
The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
9. Arno 467856 Solid Steel French Timber Framing Slick Chisel 40 mm (1-9/16 Inch) Wide x 14 Inches Long RC 58-60 PVC Dipped Handles
Feature
Slick is 40 mm wide (1-9/16") x 14" long, weighs 25 ouncesThese chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
The handles are bent up a few degrees from the back of the chisel allowing use as slicks
The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
10. Arno 467894 Solid Steel French Timber Framing Slick Chisel 20 mm (3/4 Inch) Wide x 10-1/2 Inches Long RC 58-60 PVC Dipped Handles
Feature
Slick is 20 mm wide (3/4") x 10-1/2" long, weighs 12 ouncesThese chisels are made from one solid piece of forged steel so can stand up to extreme abuse. They can be struck on the ends with a hammer and sustain no damage.
Hardened at the cutting edge to 58-60 Rockwell and left moderately hardened at the ends to minimize the danger of flying steel when struck.
The handles are bent up a few degrees from the back of the chisel allowing use as slicks
The cutting edge is ground and then sharpened on a felt wheel and ready to use without any touch up needed
