We spent many hours on research to finding stucco lath, reading product features, product specifications for this guide. For those of you who wish to the best stucco lath, you should not miss this article. stucco lath coming in a variety of types but also different price range. The following is the top 9 stucco lath by our suggestions:
Best stucco lath
1. SpiderLath Fiberglass Lath | Stucco Netting | Stucco Mesh | Non-Rusting Metal Lath Alternative | Self Furring | 300 sq ft. With Strips
Feature
Rust Free- Fiberglass will not rust.Self Furring- Code Required 1/4" behind and in front
6x Added Strength- Six times stronger than standard metal lath
Save up to 50% on Installation
Building Code Approved- ASCE, ICC, IAPMO, ANSI
Description
SpiderLath (patent approved) is a superior fiberglass lath system for use in stucco, plaster, manufactured stone, and natural stone veneers, brick and other masonry systems! SpiderLath can be used over existing surfaces to apply masonry finishes. SpiderLath is fully encapsulated in the mortar bed creating a fiberglass reinforced scratch coat. No more cuts from the old metal lath! SpiderLath is easy to handle and lightweight! Only 20 lbs per 300 square foot roll. One person can safely climb scaffolding with 300 sf of fiberglass mesh! Rust proof and non corrosive. Excellent for use in coastal areas! SpiderLath has received IAPMO Evaluation Approval for conformance with the International Building Code (IBC) and the AC 275. The SpiderLath Advantage SpiderLath is designed to be a replacement alternative for metal lath in conjunction with the following products: Manufactured stone veneer; one and three coat stucco; natural stone thin veneer and plaster. SpiderLath offers corrosion free material designed to last the life of the material being applied to it. It is made of AR fiberglass, a known material compatible with cementitous materials. It uses a twisted weave to aid in keying the mortar. SpiderLath adds tensile and flexural strength to the cementitious material providing a stronger bond. Features and Benefits of the SpiderLath Strip System: Self Furring Standoffs - Holds SpiderLath off the wall, allowing mortar to fully encapsulate the mesh. This creates a fiberglass reinforced scratch coat, providing optimal strength and flexibility. SpiderLath gives you a better wall and less cracking. Nailing Guide - Eliminates random fastening by following our code approved installation guidelines.2. SpiderLath No Strip | Fiberglass Lath | 300 Sq Ft | Non-Rusting Metal Lath Alterative For Flooring, Countertops, Decorative & More
Feature
Non-Rusting Fiberglass Lath For Flooring, Countertops, Concrete Stairs and moreCrack Resistant- Accommodates Movement Over Time
6x Added Strength- Greater Flexural and Tensile Strength Than Metal Lath Products
Lightweight & Easy To Handle- Cut With Scissors, 300 Sq Ft. Is Less Than 20 lb
Cut Labor Costs For Installation- Up To 50%
Description
50 Year Warranty- SpiderLath (patent approved) is a superior fiberglass lath system for use in tile, countertops, shower surrounds, concrete stairs, concrete overlays and other systems! SpiderLath can be used over existing surfaces to apply masonry finishes. SpiderLath is fully encapsulated in the mortar bed creating a fiberglass reinforced scratch coat.3. Plaster Washers (Box of 100)
Feature
1" Wall And Ceiling Plaster Repair Button Washer (Box of 100)Description
- Material: Steel
- Finish: Zinc Plated
- Size: 1" Outside Diameter X 5/32" Center Hole
- Quantity: 100 Pieces
- Unique Design Of The Plaster Washer Anchors The Plaster Firmly Against The Lath, Stopping and Repairing Cracks And Sagging
- For Use With Drywall Screws
4. Stucco Sprayer - 4 Jet Wall Sprayer - Made in the USA - One Year Warranty - Finish the job faster
Feature
Fast and easy application of stucco, mortar and plasterTwo sets of changeable jets to match your compressor
Nearly one gallon hopper capacity
Jet cleaning tools included
Non-rusting, extremely durable hopper
Description
This stucco sprayer is a great tool to speed up your building process and save you labor! Use it with your air compressor that has a minimum 7 cfm at 90 psi. For the larger jets, your air compressor needs at least a 12 cfm at 90 psi. You can spray mortar, plaster, stucco, small scale shotcrete, paper Crete, GFRC, earthen mixes and more. Also very useful for traditional plastering and many alternative building methods. The stucco sprayers can apply stucco on straw bale, earth bag, insulated panels and thin shell fibrocement. These sprayers open up the world of small scale shotcrete and LVSC (low velocity sprayed concrete) in structures like SCIPS (structural concrete insulated panels). This stucco sprayer is for heavy applications of 1/4" to 1" thickness. This plaster sprayer is not for thin drywall textures. Typically it is used for brown coat, scratch coat, base coat and slip coat applications. One-year warranty for parts and workmanship mortarsprayer.com offers a full one-year warranty on parts and workmanship. Jets are considered consumable parts and are warranted for 90 days (although they should last the life of the tool if you keep them clean). If you have problems with your tool and need to return it for service, please request a return merchandise authorization number by calling (800)669-3272. You will be responsible for shipping the sprayer to mortarsprayer.com and mortarsprayer.com will pay for shipping a repaired or refurbished sprayer to you. It is very rare to have any warranty requests on our stucco sprayers.5. Zircon MetalliScanner m40- FFP Handheld Electronic Metal Detector Use on Dry Wall, Concrete, Lathe and Plaster, Stucco and More, Battery Included
Feature
Zircon's MetalliScanner m40 metal detector locates ferrous (magnetic) metal and non-ferrous (non-magnetic) metalQuickly and easily detects metal in wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces
Works as a great stud finder for plaster walls, as well as finding rebar in concrete
Easily finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings
Now in easy open packaging, 9 volt battery included
Locates ferrous (magnetic) metal behind walls up to 4-Inch (102 mm) deep and non-ferrous (non-magnetic) metal up to 2-Inch (51 mm) deep
Works great for finding studs in lathe and plaster walls, as well as finding rebar in concrete
Now in easy open packaging, battery included
Description
The Zircon MetalliScanner m40 electronic metal scanner quickly and easily detects metal in lath and plaster, wood, drywall, paneling, tile, stucco, plaster, concrete and other non-metallic surfaces. This metal detector locates ferrous (magnetic) metal up to 4 inches (100 mm) deep and non-ferrous (non-magnetic) metal up to 2 inches (50 mm) deep. The Zircon m40 has two scanning positions, Wide Scan and Pinpoint Scan. To get started, install the included 9V alkaline battery. Hold the tool in the air away from any metal but make sure the blue sensor is parallel to the surface being scanned. Press and hold the Power Button to calibrate the unit. Once you hear a beep and see the green "Ready" LED illuminated, calibration is complete. Continue to hold the Power Button as you slowly slide the tool across the surface. As the MetalliScanner approaches a metal object, the red LEDs progressively light from the bottom up in both scanning modes. The top lighted blue coil and an audio tone indicate when a metal target is located. This MetalliScanner m40 tool easily solves the very difficult problem of finding studs in lath and plaster walls. It works as a nail finder by detecting the pattern of nails that attach the wood lath to the studs. Additionally, the MetalliScanner m40 metal locator finds plumbing, ductwork, rebar, nails and screws in your walls, floors and ceilings and is great for scanning reclaimed lumber for hidden metal. Now in easy open packaging, this product comes with everything you need to get started, including the battery! Backed by our world class customer service and support, we at Zircon know that whether you're a Construction Professional or weekend DIY enthusiast, you'll find the m40 has the technology and durability you're looking for to get the job done right.6. Builder's Guide to Stucco, Lath & Plaster
Feature
Used Book in Good ConditionDescription
Builder's Guide to Stucco, Lath & Plaster By Max Schwartz (Author) with Walter F. Pruter (Contributing Editor) Covers every aspect of stucco design, construction and repair:
- Plaster base (structure, water-resistant barrier and lath) and flashing
- Mixing and application basics
- Plaster finishes and textures, and how to achieve them
- Decorative plaster work: implants, molds, etc.
- Structural, thermal, water-resistant and acoustic properties of cement plaster
- Scaffolding and safety
- Cost estimating
- Typical causes of plaster failure, and remedies
- Repair and maintenance of stucco
The included CD-ROM brings you the complete book in Adobe PDF format, for job-site reference and quick word searching. (Printing has been disabled for the CD-ROM.) Requires the FREE Adobe Reader software available for download from the Adobe website.
Published by Builder's Book, Inc. , 2007
ISBN 1889892726/9781889892726
7. Zircon MultiScanner i520-FFP Center Finding Stud Finder with Metal and Live AC Wire Detection
Feature
Zircon's MS i520 is a multi-surface scanner with 4 modes that detect studs, metal and live AC wiring to help you easily find studs and avoid hazardsBoth StudScan and DeepScan modes locate the edges, center and direction of wood or metal studs; Metal Scan mode finds both non-ferrous metal (such as copper pipe) and ferrous metal (such as rebar); AC Scan finds and traces live, unshielded electrical AC wires
WireWarning Detection indicates the presence of live, unshielded electrical AC wiring while scanning in StudScan, DeepScan, and Metal Scan modes
ACT (Auto Correcting Technology) automatically corrects common user errors, such as when scanning begins over a stud, while the Patented SpotLite Pointing System clearly indicates the target location
One fully charged 9V battery, not included, is required for the multi-surface scanner to run at optimal performance
Description
The Zircon MultiScanner i520 center finding electronic wall scanner quickly and easily locates studs, detects metal, locates live, unshielded AC wires. Complete with the latest technology in density detecting software and circuitry, as well as an ergonomic body design. Unlike other wall scanners and stud finders, the Zircon i520 stud finder has a 4-mode switch makes it easy to change functions while the ultra-bright LCD screen, SpotLite Pointing System, and audio tone all indicate the location of the target. This Zircon stud finder also comes equipped with a Signal Strength Indicator helps to distinguish between shallow and deep targets. A weak signal can also imply other non-stud objects, like wires and pipes, are present in the area being scanned. The MultiScanner i520 includes ACT (Auto Correcting Technology) that automatically corrects common user errors, such as when scanning begins over a stud, in addition to a low battery indicator to alert its users to replace its battery for optimal performance results. The tool constantly scans its surroundings and recalibrates itself if necessary. In StudScan mode, the Zircon i520 locates the center, edges, and direction of wood or metal studs up to 3/4 (19 mm) of an inch deep. Switch the i520 stud finder over to DeepScan mode and double the scanning depth to 1.5 inches (38 mm) deep and enables scanning for joists in some ceilings and floors. Metal Scan mode of the MS i520 provides the ability to locate non-ferrous metal, such as copper pipes, up to 1.5 inches (38 mm) deep and ferrous metal, such as rebar, up to 3 inches (75 mm) deep. Using Metal Scan mode, this Zircon studsensor can find studs behind lath and plaster walls, tile, drywall and stucco walls by identifying the consistent pattern of screw or nail heads in the studs. Additionally, the MultiScanner i520 is programmed with a WireWarning Detection feature that indicates the presence of live unshielded electrical wires up to 2 inches (50 mm) deep when using the stud and metal scan modes. To detect, locate, map, and trace the live wires, simply switch over to the AC Scan function which acts as a live wire detector and finds and traces live, unshielded AC wiring up to 2 inches (50 mm) deep. The Zircon MultiScanner i520 is a perfect choice for serious users, such as home improvement hobbyists and professional contractors. With the Zircon MS i520, you can safely maneuver through the most complicated of projects with the professional confidence that comes from owning a Zircon.8. ITW Brands 21506 600 Pack, 8 x 3/4", Teks No Pre-Drilling Lath Point Screws, quot
Feature
Tap their own threads, secure fastening & striping holding powerAttaching metal lathe to steel studs for stucco/plaster applications
Attaching pre-drilled metal brackets to wood,
Description
600 pack, #8 x 3/4", Teks no pre-drilling lath point screws, tap their own threads, secure fastening & striping holding power, allows for efficient material removal, applications: attaching metal lathe to steel studs for stucco/plaster applications, attaching pre-drilled metal brackets to wood, applications requiring a wide, low profile head.9. Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8 dia for 6 inch lights: fast cutting in drywall, lath & plaster, Hardi board: easy plug removal uses standard 5/8 18 thread hole saw arbor adptr
Feature
1" deep - Hard tungsten carbide grit edge for a long life in abrasive materialsContinuous cutting edge for smooth cutting even in wood lath and plaster
Cuts through drywall, plaster, CornHole board, fiber cement Hardie board, stucco, acoustical tile, ceiling tile
Attaches to standard 5/8"-18 2-pin mount hole saw arbor and works with Hole Pro HP1156 Large shield and Arbor kit
Open back design for faster cut plug removal
Description
HOLE SAW ONLYDoes NOT INCLUDE Pilot Bit, Arbor or Shield or Hole Pro X-230+
Blue Boar Tungsten Carbide Grit Recessed Lighting Hole Saw 6-3/8" is perfect for installing most 6-inch recessed light cans in ceilings and sofits.
CONFIRM the actual cutout size of your recessed lights as all 6" lights can vary by manufacturer. -- The hole saw has a hard tungsten Carbide grit that provides longer life in tough, abrasive materials.
Continuous cutting edge provides a smooth cut and does not catch on wood or metal lath and plaster. The open back design makes it fast and easy to remove the cut plug and start the next cutting the next hole.
This hole saw works perfectly with recessed lights (incandescent, halogen, and LED) made by Capri, Halo, Juno, Marco, Lithonia, Progress, Lightolier, Pathway & Thomas, and others light cans requiring a 6-3/8" opening.
The 1-inch cutting depth will cut through the thickest drywall, stucco, and plaster, and provides clearance so the carbide grit
Hole saw can also be used with Hole Pro HP1156 Large Shield and Arbor kit or Hole Pro X-230+ hole cutters for 100% dust containment of the drywall dust or when dealing with lead paint or asbestos and needing to use a HEPA vacuum.
Attaches to standard 5/8"-18 thread hole saw arbor adapters made for 1-3/8" and larger hole saws including the Blue Boar Heavy Duty 7/16" shank dual arbor and mandrel kit HP1597
