All in all, we spent hundreds of hours combing through thousands of user reviews to put together a comprehensive list of the best pneumatic oil extractor on the market. We then delved into these pneumatic oil extractor further and put together detailed reviews so that you can easily pick the best pneumatic oil extractor for your needs.
Best pneumatic oil extractor
1. EWK 15L Oil Changer Fluid Vacuum Extractor Oil Pump Extractor Pneumatic Fluid Evacuator + Brake Bleeder Hose
Feature
MULTIFUNCTION OIL CHANGER MANUAL & PNEUMATIC MODEL - Quick Extraction On Pneumatic Mode, 1.6L/Min. Oil Changing Anywhere Without Compressor On Manual Mode.WIDELY USED FOR FLUID EXTRACTION - Engine Oil, Gear Oil, Brake Oil, Coolant, Water, Etc.
PIPE FITTINGS FIT MOST EQUIPMENT - Connected Hoses Fits Car, Marine, Lawn Mower And Industrial Machinery.
EXTRACTION WITHOUT CAR LIFTED UP - Special Angle Spout Design Makes Everything Clean. Changing Oil, Your Best Partner!
REPLACING HOSES CAN BE PURCHASED SOLELY - The Nylon Hoses Are Consumables In The Set And Should Be Changed When They Are Worn Out Get New Ones By Searching EWK Extractor Hose
Description
Kit Including :Include 1.5 meter silicon brake bleeding hose with one touch control valve & universal rubber adapter, can fits to most type brake fittings.
1. A. 4 x 8 Silicon hose x 1.5 M
(Include 3 nylon tubes can be extracting any non-corrosive fluids.)
B. 7.8 x 9.8 Nylon hose x 1 M
C. 5.3 x 6.7 Nylon hose x 1 M
D. 4 x 6 Nylon hose x 1 M
Two air outlets with check valve design on handle for easy & quick to release the air from the extractor.
Non-sparkn fluid extractor.
Easy to operate suitable for engine oil, gear oil, brake fluid, water.
Provide with new design decompression valve for easy to relesae the negative pressure.
Fixing valve & safety cup for automatic cut-off extracting.
SPECIFICATIONS :
Air Inlet : 1/4"
AVG. Air cons : 2CFM
Fluid temperature range : 1- 95C (35F- 200F)
Working pressure range :40-170Psi , 2.8-11.7Bar , 0.28-1.17Mpa
2. Mityvac MV7300 Pneumatic Air Operated Fluid Evacuator with Accessories for Draining Engine Oil or Transmission Fluid Directly Through the Dipstick Tubes
Feature
Includes brake/clutch bleeding kit (Model MVA7205) for vacuum bleeding hydraulic brake and clutch systemsIntegrated reservoir with large base with foot stabilizer
Automatic overflow prevention with quick-drain pour spout
Integrated 2.3-gallon capacity reservoir and includes accessories for draining engine oil or transmission fluid directly through the dipstick tubes
Applications include evacuating engine oil, transaxle oil, coolants, power steering fluid, transmission and brake fluid
3. JohnDow Industries Crew Chief JDI-6EV 6 Gallon Fluid Evacuator
Feature
Heavy-duty steel construction for years of trouble free serviceEasy-to-read vacuum generator
Six suction probes for most applications. 7 inch wheels for easy handling
Three "OE Style" evacuator adapters
Sight tube for quick indication of fluid level
4. EWK 2 Liters Pneumatic Brake Bleeder Kit Vacuum Brake Bleeder Oil Fluid Extractor Pump
Feature
Perfect Fit EWK Brake Fluid Bleeder comes with universal rubber adaptor hose that fits all standard and ABS brake systems on cars, trucks, snowmobile, ATVs and motorcycles.Money Saver The one person vacuum brake bleeder is able to bleeds and flushes hydraulic brakes for 4 wheels efficiently. Great value for both home garage or professional workshop.
Safe Operation Drain and collect old brake fluid without spillage. Safe pressure release valve and non-leakage oil outlet ensure an excellent working experience of regular maintenance.
One Man Job Perform constant suction by holding the trigger with locking ring, allows you to leave it and go around to check the master cylinder fluid from time to time.
Best Seller on Amazon Highly recommend by professional mechanics. Qualified ISO and TUV manufacturing process. EWK provides you premium Quality tools with 12 months warranty. Service and Safety guaranteed!
5. Roughneck Pneumatic Oil Extractor - 8-Gallon, 115 PSI
6. FIRSTINFO 15 Liter Pneumatic Manual Fluid Extractor/Vacuum Oil Pump Includes 6.6 ft Long Silicon Brake Fluid Hose with Check Valve Set (Standard w/Extra 3.5x4.5 mm Hose)
Feature
Widely Used for Extraction-- To extract the engine oil, brake fluid ATF fluid and other fluid of motorcycles and vehicles. Not limit to any places; perfect for working on vehicles in the garage or outdoors, and also for aquarium.Upgraded Brake Bleeding Hose-- One extra upgraded brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid back flow when bleeding. The length is longer than normal ones for the longer distance. Makes your oil extractor multi-functional.
Different sizes of Nylon tubes-- With 4 diameters of tubes which can go into the bottom of oil pan. Nylon oil hoses B: 7.8x9.8mm X 1M C:5.3x6.7mm X 1M D:4x6mm X 1M E:3.5x4.5mm X1M; B hose can be connected to (C,D or E ) hose and it will be 2 Meter length. To reach the very bottom of the reservoir and suck up the fluid.
Large Capacity - 15L in capacity (holds up to 3.9 gal of fluid )which is perfect for cars with large engines without stopping the oil changing during the extraction.
Two-Way Mode for Oil Change-- The pneumatic way for higher speed of oil change ; just need to connect with air compressor. Manual operation requires no other equipment; easy to do the oil / fluid changing for DIY. No need to to lift up or crawl under the car to change oil.
7. EXtoil 15 Liter Professional Pneumatic Oil Extractor
Feature
HUGE 15 Liter CapacityPerfect for Trucks & Boats
Shop-Air Attachment for Automatic Extraction
Long Pump Handle for Manual Extraction
Exclusive Built-In Vacuum Gauge
8. FIRSTINFO 2nd Generation Pneumatic/Manual 6.5 Liter Oil/Fluid Changer Vacuum Extractor Pump w/Hose Storage + 3.5 x 4.5 mm Engine Oil Hose + Dust Cover
Feature
Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not limit to any places; perfect for working on vehicles in the garage or outdoors, and also for aquarium. No need to to lift up or crawl under the car to change oil.Two-Way Mode for Oil Change-- The pneumatic way for higher speed of 1.6~1.7L /min, extracts engine oil in a 4 cylinder car within 5 minutes. Manual operation requires no other equipment which is easy to do the oil / fluid changing for DIY.
Different Sizes of Tubes to Fit Most Vehicles -- With 4 kinds (B.C.D.E) nylon tubes which can go into the bottom of oil pan ; And use hose B to connect with C,D, or E to extend the hose length to 2 Meter (78.7inch) in Total. To reach the very bottom of the reservoir and suck up the fluid. And the extra "E" 3.5 x 4.5mm Nylon hose for the new style vehicles.
With Safety Design-- Provided with fixing valve and safety cup for automatically cutting off extracting. And three air outlets with check valve design -- quick and easy to release the air.
Replacing Hose Available And Hose Storage with Dust Cover Design- The hose can be purchased individually. With the storage hose to collect oil hoses easily, and duster cover to avoid any dust and dirt.
9. kweiny Pneumatic Fluid Extractor for Replacement of Automotive Brake Fluid and Clutch Fluid and Power Steering Fluid
Feature
Used for fluid extraction, such as brake oil, clutch oil, power steering oil, engine oil, gear oil, coolant, water, etc.Suitable for car, motorcycle, truck, engineering vehicle and other machinery that need to be extracted liquid;
Working requirements: compressed air 20psiP120psi, the height of the pulling liquid increases with the increase of air pressure. Air inlet: 1/4" quick coupler male plug;
One can do all the work for brake system bleeding effectively. Make the work more clean, no dirty oil stained on floor;
The working principle and operation steps are detailed in the instructions on the package.
10. OEMTOOLS 24937 6.0 Liter Pneumatic/Manual Fluid Extractor 1.5 Gallon (6L) | Convenient Oil Change & Fluid Change Tool | Easy-to-Use Hand Pump and Vacuum Pump Functions | No Leaks, No Overfills
Feature
MULTI FLUID-REMOVAL TOOL: Oil, transmission, radiator coolant, water, and more; this multi-use tool will save you time and prevent spills or messes that require exhausting clean-ups; simply insert fluid removal tube directly into your vehicles dipstick tubes, and use the hand vacuum pump to extract oil or other fluidEXTRACT FLUIDS THROUGH DIPSTICK TUBES: No need to get under your car, or to use an expensive shop lift, the OEMTOOLS 24397 features a dipstick tube fluid remover that allows you to drain your oil, radiator fluid, or other engine fluid directly from dipstick tubes; Features one . 25 inch diameter extraction tube that fits all dipstick tubes in nearly every vehicle, and one . 75 inch diameter extraction tube for faster extractions from power steering, differential, transfer case systems, and so on
VEHICLE FLUID REMOVAL TOOL: At 6 liters capacity, this manual oil and fluid-extractor pump can be used for oil and fluid changes in most cars and light-duty trucks
FOR PRO AND DIY MECHANICS: This convenient manual oil-changing tool is perfect for professional and DIY mechanics; quickly and easily remove oil, radiator fluid, transmission fluid, power steering fluid, and more during routine maintenance; and fluid extractors lid removes for easy recycling of drained fluid
PRODUCT SPECIFICATIONS: 6 liters fluid capacity; hand pump; shut off valve (internal float shuts off suction when fluid is at max capacity); fluid extractors lid is removable to allow for easy recycling of fluid; 2 dipstick fluid-removal tubes, 5-foot pneumatic flex tube, 19 inch overall height
