We spent many hours on research and managed to find top 10 optics plate for taurus g2c that is best suitable for you. This review is based on reliable sources, product specs, and hundreds of customer reviews. In this article, were going to highlight the main features of the best optics plate for taurus g2c and why they are important when it comes to choosing the right one.
Best optics plate for taurus g2c
1. Ade Advanced Optics Crusader RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Feature
Installing the aftermarket optic plate is not simply plug and play. We recommend having a qualified gunsmith to install. Comes with a ADE RD3-009 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.
The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing.
6 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W
Shock proofFog proof and Waterproof for 30 minutes under 4ft water. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim.
Installing optic plate to handgun is NOT recommended for users that are not familiar with pistol assembly. This optic plate requires removal of the rear sight, dissemble the pistol slide to reach the screw hole underneath. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
2. ADE RD3-006x Green Dot + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS, Non-Aftermarket Slide) Standard Models, Canik TP9SF and Taurus GX4, G3C & G3 with Factory Steel Sights Pistol
Feature
This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock 100. Does NOT fit Glock with AFTERMARKET slide with optic cut.The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith
We have made several improvements since it's initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side.
Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax and to provide a very clear, crisp sight picture
4 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included)
Why dont I see a perfect round dot? Instead, I see a splashed dot, half-moon shape, multi dot, starburst etc. Answer: It is very likely (99% chance) you have astigmatism that you are not aware. What you see is a led light image reflected on the lens. One simple way to find out is to use your cellphone to take a photo of the dot. If you see a circle dot in the photo you took, you basically diagnosed you have Astigmatism(Because cellphone is a machine does not has human astigmatism).
Many users with astigmatism decide to continue to use the imperfect dot, or use a bigger MOA red dot such as 6MOA instead of 3MOA. Some users also see green dots better than red dots, it really depends on the individual case. Or users can use a totally different optics which is not a reflex sight such as a rifle scope.
3. Ade Advanced Optics Red Dot Sight Mount Base for Taurus G2C, G2S, G3 Without Factory Steel Sights, PT111 G2, PT140 G2, PT709, PT740 and The TX22 Pistols
Feature
This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo).Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.
This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search "ADE G3C/GLOCK PLATE" on amazon.
Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the sights with Shield RMSC and trijicron rmr footprint.
Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
4. Ade Advanced Optics Mini Red Dot Sight Mount Base for Taurus G2 Series and Original G3, TX22 to Mount Burris FastFire 1/2/3/4, Doctor Red Dot Sight
Feature
This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo).Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.
This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search "ADE G3C/GLOCK PLATE" on amazon.
Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the sights with Shield RMSC and trijicron rmr footprint.
Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
5. Ade Advanced Optics Optic Mount Plate for Taurus PT111 G2, Millennium G2, G2, G3 and TX22 to fit on Vortex Venom, burris fastfire, meopta, eotech mrds, docter, Insight Red Dot Reflex Sight
Feature
UPDATE: Inventory has fixed as of Dec 28th. All new shipment will be machined correct to fit tx22. This optic plate is made to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo).Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.
This plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search "ADE G3C/GLOCK PLATE" on amazon.
Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots. Also Fit Vortex Venom/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the sights with Shield RMSC and trijicron rmr footprint.
Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
6. Ade Advanced Optics Delta RD3-012 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Feature
Comes with a ADE RD3-012 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.
The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing.
Top load system, no need to remove the sight to change the battery. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
6 MOA. 1.75" length x1.25" width x1.15" height. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim.
Installing optic plate to handgun is NOT recommended for users that are not familiar with pistol assembly. This optic plate requires removal of the rear sight, dissemble the pistol slide to reach the screw hole underneath. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
Shock proofFog proof and Waterproof for 30 minutes under 4ft water
7. DPP Titanium Sight Mount for Taurus G2/G3,TX22 Vortex Venom & Viper,Burris Fastfire,Ade
Feature
For PT111 G2, PT140 G2, PT709, PT740, G2/G3,TX22 Vortex Venom & Viper,Burris Fastfire,Ade, *NOT FIT THE Counterfeit SIGHT.One Piece Design for a Secure Zero Hold,Easy to install
30MOA design, Solved some red dots don't have enough elevation adjustment to put the sight down on pistol mount.Installation hardware and tools included.
Precision CNC Machined from 7075-T6 aerospace grade Aluminum with Black anodizing finish.
100% MONEY-BACK warranty within 30 days of purchase. NO QUESTIONS ASKED.LIFETIME WARRANTY.Please contact us for any questions,7X24 hours quick response.
8. Ade Advanced Optics Bertrillium RD3-013 Red Dot Reflex Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Feature
Comes with a ADE RD3-013 red dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.
The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing.
4 MOA. Top load system, no need to remove the sight to change the battery. Red dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off
1.75" length x1.25" width x1.15" height. Fully windage and elevation adjustable and lockable; Unlimited Eye Relief. Full metal construction with glass lens. No plastic body, no plastic lens.
Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim.
Installing optic plate to handgun is NOT recommended for users that are not familiar with pistol assembly. This optic plate requires removal of the rear sight, dissemble the pistol slide to reach the screw hole underneath. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
Shock proofFog proof and Waterproof for 30 minutes under 4ft water
New advanced battery technology gives up to 3000 hours on bright setting and up to 40k hours on Low setting with a 2032 Battery(Included). Every time you turn on the dot it stays the same brightness level last time it was turned off
9. Ade Advanced Optics RD3-006 Green Dot Sight + Optic Mounting Plate for Taurus PT111 G2, Millennium G2, G2C, G3 with Original Rear Sight, PT140 G2, PT709, PT740, TX22 + Pictinny Plate
Feature
Comes with a ADE RD3-006 Green dot, a Picatinny plate and a pistol optic plate to REPLACE the rear sight of G2c, G2s, G2, PT111 G2, Millennium G2, and TX22 Pistols.This plate also fits Taurus G3 with Original Rear sight(see photo)We are listening! Based on customer feedback, we are now sending the new production that has 45 degree edge, it simply slide into the dovetail slot without needing to file the edge like the old product plate that has 90 degree.
The pistol plate does NOT fit G3 with NEWER FACTORY STEEL SIGHT, G3C, please search ADE G3C plate on amazon under different listing.
This GREEN dot comes with a picatinny mounting plate pre-assembled (might be packaged separately in the retail package, depends on the ADE model). Please use the allen wrench provided to take out the 2 hex screws(M3x6mm) on the top behind the glass frame. It will disconnect the red dot from the picatinny mounting plate. You will then be able to attach the red dot to a variety of handgun mounting plates
4 MOA. Operates with a single CR2032 battery(installed underneath). Multiple brightness setting. 1000 hours battery life on the brightest setting. Auto turns off after 4 hours. Approximately 1.01"H x 1.9"L x 1.1W
Comes with protective cover, screws, wrenches, instructions, lens cloth, anti flickering shim. Full metal construction with glass lens. No plastic body, no plastic lens.
Installing optic plate to handgun is NOT recommended for users that are not familiar with pistol assembly. This optic plate requires removal of the rear sight, dissemble the pistol slide to reach the screw hole underneath. Gunsmith experience is required. We recommend hiring a professional gunsmith. Please note. Unprofessional installation such as improper torque will result in screw loose, not holding zero, damage to the firearm/optic and personal injury.
10. Optic Base Mount Plate for Taurus PT111 Millennium G2 G2c G2s Original G3 Vortex Viper Venom ADE Docter Noblex Red Dot Sight (Black)
Feature
The Optic Mount Plate for the PT111 G2, Millennium G2, G2, G2c, G2s, and original G3, or TX22 pistolsMade from aircraft grade aluminum and then hard anodized to mil spec for longevity and scratch resistance
Designed to replace your rear sight, no milling of the slide required No gunsmithing required for this mounting plate
Will work withJPoint, Shield Sight Reflex Mini Sight, Vortex Viper, Vortex Venom, ADE RD3 003, ADE RD3-006A, ADE RD3-006B, Docter/Noblex Sight C, Docter/Noblex sight 2+, Docter/Noblex sight III, Docter/Noblex QUICKsight 5.0 VR, Noblex Sight G, Burris Fastfire 2, Burris Fastfire 3, Delta Optical MiniDot, Delta Optical MiniDot II, Hawke Reflex 125, Sightmark Mini Shot Pro Spec, Sightmark Mini Shot M-Spec, Leica Tempus, MAKdot 125, Vector Optics SCRD-19II Frenzy 1x17x24, or Vomz Pilad 120 optics
Includes the Optic Mount Plate Installation hardware and tools
