Finding your suitable headlight tint smoke black gloss is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best headlight tint smoke black gloss including detail information and customer reviews. Let’s find out which is your favorite one.
Best headlight tint smoke black gloss
1. VViViD Dark Black Headlight Taillight Tint Air-Release Vinyl Wrap Film Roll (1.49ft x 60")
Feature
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 1.49ft x 60"
Description
WARNING: These films are made for headlights and tailights that would normally be impossible to wrap. These tints have air release and are applied with heat to conform to desired shape. It may leave a subtle orange peel that is not normally visible from a short distance. All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods. These tint films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. This film is also self healing and scratches will go away with heat! USE: Simply cut vinyl to shape, apply it to surface. To make vinyl conform to shape, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!2. VViViD Air-Tint Smoke Black Gloss Vinyl Headlight Foglight Transparent Tint Wrap Self-Adhesive (60" x 48")
Feature
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with scratch-resistant automotive grade cast vinyl, VVIVID Air-Tints were developed in Canada to reduce the risk of shrinkage and peeling almost completely! The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 60" x 48"
Description
Add style and protection to your lights with VViViD Vinyl's Headlight Tint Vinyl. This easy to use vinyl roll is durable, lightweight and a great alternative to fixing or replacing potentially damaged lights. Each vinyl sheet features our air-release adhesive backing making installation easy at any skill level. Ideal for any headlight or tail light on any vehicle.3. 12" x 84" In / 1 x 7 Ft Stark Gloss Light Black Smoke Tint Headlights Tail Lights Fog Lights Vinyl Wrap Film
Feature
Universal Fitment for Headlight / Fog Lights / Tail Lights - Car Trucks SUV Jeep Motorcycle ATV and Various ApplicationsImportant Note: There may be some air bubbles between the vinyl sheet and the protective film that look like "wrinkle or damage" HOWEVER, once the protective film is peeled off, the actual vinyl sheet will be just fine for installation
Pre-Install: Has additional a 3rd layer protective film to protect the vinyl sheet from scratches during shipping (make sure to remove this protective film during installation)
UV protected / Can be shaped and molded over complex curves and can also be used with a heat gun or household blow drier for shaping
Disclaimer: If you do not have any wrapping or window tinting experience, please DO NOT apply this material by yourself. If you have some experience and want to try it, you can purchase a smaller sizes to try out before to buy any large sizes material. Professional installation is always highly recommended.
Description
Specifications:Product Intended Use: Vinyl Film is a simple single-ply DIY trim-to-fit sheet of film. The design is to be applied to the exterior of your vehicle and can be applied to OEM or aftermarket lights for a customized look. Sold in variety of sizes the film is backed by a 3-year warranty and the durability rating is 5 years outdoor and 8 years indoor. Protect your headlights, tail lights, fog lights, side marker lights!
Style: Premium Glossy Finish
Self adhesive peel and stick
Will not chip, fade, crack or peel
Waterproof and stain resistant
UV Protected
Shaping and molding over complex curves
Flexible and stretchable
Easy removal with no residual and will not harm your lamp
Just use heat gun or hair dryer to help with shaping
Has additional 3rd layer protective film to protect vinyl sheet from scatches during shipping (Please Remove Film During Installation)
Please measure application before purchase (Professional Installation Recommended)
4. LinkedGo 12 by 72 Inches Self Adhesive Light Black Headlights or Fog Taillight Tint Vinyl Film (1272inch, Light Black)
Feature
Self-adhesive, peel and stick, protect the car light from scratches12"x72" film sticker for car headlights, fog lights, taillight, lamp,etc.
3 mil thick (.0042") blends seamlessly with lights
Easily cleansed with water and easy to remove without residual
Superior transparency, light transmittance up to 75-80 percent Smoke Black
Description
Installation precautions, please read carefullyIf large bubbles are present, peel up the film to that area and apply again. LinkedGo vinyl film is very forgiving when both the area and the adhesive side of the film is wet. Keeping the film wet allows you to pull and reapply numerous times if not satisfied with results prior to heating the film.
For headlight tint kits with slits spray the outside of the film with solution again. This will reduce scratching. Spray the light once again. Proceed as above being sure to liberally apply the solution to both sides of the film. When the film is stretched into position one of the sections or flaps of the film will naturally fall over the other. Lightly smooth the flap down until flat. Using a razor gently score away the overlapping film until you can easily pull the excess film away.
For lights with large curves (the most common lights on the market today), spray the outside of the film with solution again. This will reduce scratching. Spray the light once again. Apply pressure to the center of the film on the light with a squeegee so that it begins to adhere to one end of the light. It may be easier to have a partner help you by holding the film as you begin the next step. Gently begin to heat the film on one end from the center with a hair dryer or heat gun on a low setting. Take your time in heating the film, you do not want to melt the film.
Apply the remainder of the film by moving in a spiral or circular motion working outwards towards the edge of the light. Keep the film "warm" by continually heating it will allow it to stretch up to 2% to 5% and conform. This is the only way you can apply tint to a curved light unless the kit has slits which are intended to be overlapped and cut-away.
Installation instructions in the product, if you have any questions during the installation please feel free to contact us
5. VViViD Air-Tint Dark Black Headlight/Tail Light Window Tint (17.9" x 60" large roll)
Feature
VVIVID Air-Tints are an industry first: a headlight/taillight tint with all of the technologies developed in VVIVID+ premium materials. They include an air-release membrane which allows you to install the tint dry ( without installation liquid ) Ready to use out of the box!This is the only film on the market that can wrap ANY SHAPE. It is super conformable with heat. It was originally manufactured for hard-to-wrap surfaces, but the ease of install has professionals saving time on any headlight shape.
This film is also self healing and scratches will go away with heat! Simply cut the vinyl to shape, and apply it to the surface. To make the vinyl conform to curves, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!
Made with automotive grade cast vinyl, these tints are 80% tinted smoke or 20% VLT. The adhesive is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your lights.
NOTE: MAKE SURE TO MEASURE YOUR HEADLIGHT TINTS - THIS PRE-CUT SHEET IS 17.9" x 60"
Description
All headlight tints come with a subtle natural air release pattern and can be installed using either dry or wet application methods. These tint films are the first of their kind and are designed to conform to any difficult surface that would otherwise be impossible with standard headlight tints. This film is also self healing and scratches will go away with heat! USE: Simply cut vinyl to shape, apply it to surface. To make vinyl conform to shape, simply heat with a heat gun or hair dryer, stretch and apply. Lastly, using a sharp blade, trim away excess from the headlight and you're done! its literally that simple!6. VViViD Hex+ Dark Smoke High Gloss Air-Tint Headlight Vinyl 16" x 60" Roll Including Toolkit
Feature
The thickest and most resistant headlight tint available. Highly resistant to scratches, rock chips and projected head from the headlight itself.Unique hex cell pattern is embedded into the tint and not just printed on the surface. Never worry about fading or scratching!
Ultra-Clear Adhesive allows you to lift and reposition this tint multiple times without risking fingerprints, glue lines or marring. Dry application requires no messy liquids!
New and improved vinyl formula developed in Canada reduces the risk of shrinking or peeling almost completely.
Incredibly high gloss finish reduces the appearance of of the "orange peel" adhesive texture. Also receive a free hard yellow detailer squeegee and two black felt safety edge decals.
Description
Your car is going to look like it belongs to a superhero with VViViD! Our new Hex+ Headlight Tint combines all of the features of our already popular headlight tinting vinyl with a new and unique appearance you can't find anywhere else! The hex cell pattern is embedded into this high-gloss vinyl, not printed on the surface, so neither it nor your headlights are ever at risk of damage! Features our new and improved Ultra-Clear Adhesive, designed to reduce the appearance of fingerprints and marring while reducing the appearance of the glue texture once installed. Also receive a free hard yellow detailer squeegee and two black felt safety edge decals.Tackle any task with VViViD!7. VViViD Hex+ Light Smoke High Gloss Air-Tint Headlight Vinyl 12" x 30" 2-Sheet Pack
Feature
The thickest and most resistant headlight tint available. Highly resistant to scratches, rock chips and projected head from the headlight itself.Unique hex cell pattern is embedded into the tint and not just printed on the surface. Never worry about fading or scratching!
Ultra-Clear Adhesive allows you to lift and reposition this tint multiple times without risking fingerprints, glue lines or marring. Dry application requires no messy liquids!
New and improved vinyl formula developed in Canada reduces the risk of shrinking or peeling almost completely.
Incredibly high gloss finish reduces the appearance of of the "orange peel" adhesive texture.
Description
Your car is going to look like it belongs to a superhero with VViViD! Our new Hex+ Headlight Tint combines all of the features of our already popular headlight tinting vinyl with a new and unique appearance you can't find anywhere else! The hex cell pattern is embedded into this high-gloss vinyl, not printed on the surface, so neither it nor your headlights are ever at risk of damage! Features our new and improved Ultra-Clear Adhesive, designed to reduce the appearance of fingerprints and marring while reducing the appearance of the glue texture once installed. Tackle any task with VViViD!8. Stark 12" x 36" in / 1 x 3 Ft Gloss Light Black Smoke Tint Headlights Tail Lights Fog Lights Vinyl Wrap Film
Feature
Universal Fitment for Headlight / Fog Lights / Tail Lights - Car Trucks SUV Jeep Motorcycle ATV and Various ApplicationsImportant Note: There may be some air bubbles between the vinyl sheet and the protective film that look like "wrinkle or damage" HOWEVER, once the protective film is peeled off, the actual vinyl sheet will be just fine for installation
Pre-Install: Has additional a 3rd layer protective film to protect the vinyl sheet from scratches during shipping (make sure to remove this protective film during installation)
UV protected / Can be shaped and molded over complex curves and can also be used with a heat gun or household blow drier for shaping
Disclaimer: If you do not have any wrapping or window tinting experience, please DO NOT apply this material by yourself. If you have some experience and want to try it, you can purchase a smaller sizes to try out before to buy any large sizes material. Professional installation is always highly recommended.
Description
Specifications:Product Intended Use: Vinyl Film is a simple single-ply DIY trim-to-fit sheet of film. The design is to be applied to the exterior of your vehicle and can be applied to OEM or aftermarket lights for a customized look. Sold in variety of sizes the film is backed by a 3-year warranty and the durability rating is 5 years outdoor and 8 years indoor. Protect your headlights, tail lights, fog lights, side marker lights!
Style: Premium Glossy Finish
Self adhesive peel and stick
Will not chip, fade, crack or peel
Waterproof and stain resistant
UV Protected
Shaping and molding over complex curves
Flexible and stretchable
Easy removal with no residual and will not harm your lamp
Just use heat gun or hair dryer to help with shaping
Has additional 3rd layer protective film to protect vinyl sheet from scatches during shipping (Please Remove Film During Installation)
Please measure application before purchase (Professional Installation Recommended)
9. VViViD Smoke Black Adhesive Headlight Wrap Wet Tinting Vinyl 17.9" x 48" Roll (2 Roll Pack)
Feature
Customize the appearance of your headlights with ease!Adhesive-backed headlight tint is best suited for flat surfaces and provides an incredible high-gloss finish unlike anything you've seen before.
This film is self-healing with heat, minimizing and in some cases undoing scratches!
Adhesive backing is acrylic based which will not eat through plastic like other tints on the market. It is 100% chemical safe, and will not eat through headlight coatings or damage your light.
Film is wet apply: spray down your headlight with a simple water and soap mixture (no harmful chemicals needed!), squeegee out the excess and once dry, apply heat to make the adhesive permanent.
Description
Add a bold and unique appearance to your headlights with the VViViD Adhesive Headlight Tint! This adhesive backed vinyl is designed to wrap your vehicle's headlights or taillights, giving you a unique look that won't effect the vehicle underneath, This film is incredibly easy to install by hand and will impart an incredibly smooth, glass-like finish once complete. Installation guide: 1) Measure the dimensions of your headlight and cut the vinyl to the required size, adding two inches of material to every side. 2) Clean your headlight with any mild automotive cleaner, ensuring to remove all dust and debris. Allow the headlight to dry completely. 3) In a spray bottle, make a mixture of water and a few drops of baby shampoo or mild dish soap. Thoroughly wet the headlight with this mixture. 4) Drape the vinyl over the headlight and, using a squeegee and working out from the centre, carefully squeegee out all of the liquid under the film, paying careful attention to push out any and all water bubbles. 5) Using an exacto or precision cutting blade, remove any excess vinyl from around the headlight. 6) Heat the film with a heat gun or hair dryer, and allow to cure for 24 hours.10. TECKWRAP Headlight Taillight Vinyl Tint Wrap 11.5"x78" Dark Smoke Black
Feature
Unique car light with color, protecetion and proper light transmittance.Simply wet apply headlight light tint film and conform to curve of light .
Reposition with a heat gun, stretch and apply with residue and wrinkle free.
Resistant tint vinyl withstand rock chips,marrings, and other wear and tear.
Suitable for any headlights, taillights, fog Lights, side marker lights or even top part of the windshield,etc.
Description
TECKWRAP Headlight Taillight Tint FilmSize: 11.5" x 78" each roll
Finish: Dark smoke black transparent gloss
Adhesive Type: Acrylic-based, repositionable ultra-clear adhesive
Application Method: Dry or Wet Application
INSTALLATION:
A.Clean
Clean the surface to remove any oils, wax and other surface contaminants.
B.Measure & Position
Measure the size of the area to be wrapped.
Shape and Position the masking tape for easy handling.
C.Apply
Peel the backing quickly to limit the chance of dust and other particles from sticking to the surface.
Apply the film to target surface, with a soft squeegee to carefully press the air out.
If you encounter creases or wrinkles, simply heat the film, re-position and apply.
D.Trim & Detail
Carefully cut the film to shape and use the razor blade and contour the lens.
It is wise to heat the area once more time gto make sure the vinyl has settled.
