When it comes to choosing your engine hoist chain kit, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best engine hoist chain kit. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best engine hoist chain kit.
Best engine hoist chain kit
1. BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle, 3/4 Ton (1,500 lb) Capacity, Red
Feature
Easily changes center of gravitySupport brackets easily attached to engine
Use with shop cranes or hoists
Save time and labor
Capacity: 1500 lbs
Description
This engine leveler easily changes center of gravity, and saves time and labor. The support brackets easily attach to the engine. Use with shop cranes or hoists. Capacity: 1,500 lbs. Chain length: 14 in.2. Partsam 1320 lbs Lift Electric Hoist Crane Remote Control Power System, Zinc-Plated Steel Wire Overhead Crane Garage Ceiling Pulley Winch w/Premium Straps (w/Emergency Stop Switch)
Feature
Tips 1 PARTSam is the ONLY authorized seller of Partsam products.If you receive a product that does not arrive branded PARTSam on or not in a PARTSam packaging with logo, please contact that seller for a refund as it is a counterfeit PARTSam product.Tips 2How To USE: As image 3&4 show , it firstly needs a mental bar or solid wooden bar that affords enough weights to hang the hoist up ceiling indoor or hanging outdoor. To be clear, It could NOT hang itself on the ceiling without a rectangular solid bar.
Lifting Weight: 660lb.(Single-line), 1320lb.(Double-line) ; Lifting Height: 38ft(Single-line), 19ft(Double-line) ; Lifting Speed: 33ft/min(Single-line), 16ft/min(Double-line); Handle remote cord is 4.9FT ; Diameter of wire rope:0.18inch ; Tensile strength of wire rope 1770N/mm2
Rated Volt: 110/120V ~ 60Hz ; Rated Current: 10.7A ; Input Power: 1250W ; Horsepower: 1.676 hp
VERSATILE USE: Partsam electric hoist winch can be used to lift regular or irregular shape things as stones, trees, mower, engine, truck top cover ect. vertically or horizontally in garage, ceilings, loft, barn, attic anywhere and anytime you can imagine, and is a "must" in Christmas for lifting all kinds of heavy things. Extra Lift Slings we offer are included to make your job easier.PARTSam Electric Hoist Runs with Emergency Stop Switch, the Red Button Works for that
3. Rendasun 7100 Lifting Bracket Set, Engine Support bar, for use with Lifting Slings and Load Levelers, Can Withstand 4000 pounds Capacity.
Feature
IDEAL KIT TOOL: 7100 Lifting Bracket Set can be used to lift engines or other heavy parts, help transform heavy equipment and engines, they are ideal tools for workshops and garages.INGENIOUS DESIGN AND USE: The engine support bar can be directly bolted to the lifted part. This component should be used with Load Levelers and Lifting Slings to assist in lifting most engines and heavy parts. It can also be used for other purposes.
HIGH-QUALITY METAL MATERIAL: The lifting bracket kit is made of high-quality steel material, strong and durable.
MAXIMUM LOAD CAPACITY: The bracket kit has a load capacity of 4,000 pounds, long life, and hard.
PERFECT KIT COMBINATION: A lifting bracket kit is a set of two brackets, the maximum acceptable bolt diameter is 1/2 inch.
4. Goplus 1100lbs Engine Support Bar Transverse for Motor Tranny Transmission w/ 2 Points Lift Holder Hoist Dual Hooks
Feature
1,100Lbs Weight CapacityThis engine support bar has a 1,100 pounds capacity and it weighs 32Lbs.Durable ConstructionThe main construction is made of heavy duty steel with powder coat paint finish which ensures long term durability. The end of the long handle is made of plastic which make it more comfortable to use.
6 Sizes of Punches to ChooseIt has 6 dies and punches of different sizes to meet different needs for different engine sizes.
2 Chains IncludedThe package includes two chains to bind the engine for safe landing.
Size InfoOverall Dimensions: 59" (W) x 9.5" (D) x 12.5" (H).
5. Engine Lift Chain.
Feature
IDEAL USE: Assists in lifting most engines and heavy components from chassisLINK LOCKING: Securely balances weight for slip free lifting
DURABLE MATERIAL: Heat treated alloy steel for long-lasting use
MAXIMUM LOAD: 1,000 lb.
CAPACITY: 250lb weight limit
6. Oberg Tilt Lift - Engine Hoist Sling | No Chain Hoist Hassle | 1 Ton Capacity | 45 Degree Tilt | Single Hand Operation | Easy Engine Swap | Mounting Cleats Fasten to Any Engine | 3 to 1 Safety Factor
Feature
& : Our hoist sling can handle a 2000 lb. capacity and has a 3-to-1 safety rating (tested to 6,000 lbs.) Mounting cleats fasten to any engine allowing for quick and easy engine AND transmission swaps!& : Our hoist sling can handle a 2000 lb. capacity and has a 3-to-1 safety rating (tested to 6,000 lbs.) Mounting cleats fasten to any engine allowing for quick and easy engine AND transmission swaps!
: The Oberg Tilt Lift Engine Sling allows you to progressively tilt and lift the engine up to 45 degrees in either direction.
: Our hoist sling comes with lever locks that hold into place at exact angles needed to lift or lower your engine in as little as 1/4" increments, using a 1/2" ratchet or breaker bar. This makes it easy for one-handed adjustment!
& : Our lift has been making engine swaps easy for decades! Our upgraded steel components provided greater strength and better control of cable to eliminate possibility of crossover. Our sling has a 3 to 1 Safety Factor (tested up to 6,000 lbs.) and weighs only 4 Lbs. making it compact and easy to Store.
& : One half turn of the drum with a regular half-inch ratchet or half-inch breaker bar will tilt an engine up to 45 degrees. Avoid Power tools as it will turn the drum too quickly and cause the cable to get tangled. USE OF POWER TOOL WILL VOID THE TILT LIFT 1 YEAR WARRANTY. For best performance, occasionally apply lubricant to the drum body and cable front and back. We recommend a spray lubricant or white grease.
7. 1 Ton Engine Chain Fall Hoist Puller Kit 2000 Lb
Feature
1 Ton Engine Chain Fall Hoist Puller Kit 2000 Lb8. SPECSTAR 10 Feet Manual Hand Lift Steel Chain Block Hoist with 2 Hooks 2 Ton (4000 LB) Capacity Black
Feature
SPECIFICATIONS - SPECSTAR compact manual hand lift chain block hoist is made of premium alloy steel with a capacity of up to 2 Ton / 4,409 lbs.; Chains are constructed from 1/4 diameter 20Mn2 steel and are guaranteed to help with industrial heavy jobsDURABLE DESIGN - Mounted with an alloy steel manual chain with a black oxide finish which is resistant from corrosion and grime; The heavy-duty chain is forge-heated and combined with steel gear milling to strengthen durability; Cold-rolled steel cover protects the chains and gear system and improves reliability of this hoist
HIGH QUALITY BRAKE - Equipped with a mechanical load brake that allows users to accurately and safely operate the device; Load-sharing steel gears help precisely control and reduce need for maintenance and repair
SAFE & EASY OPERATION - Built to meet ASME B30.16 Overhead Hoist Safety Standards; Features 360 rotating fully forged drop-down steelhooks, prelubricated ball bearings and precision machined drive train components, guaranteed to operate smoothly and minimize manual effort
WIDE APPLICATIONS - This manual chain hoist can be used in most industrial areas, including factories, farms, garages, warehouses, ship-building, transport, construction sites, workshops, and mines
9. VEVOR Folding Engine Crane, 4400lbs Lifting Capacity Shop Crane, 2-Ton Hydraulic Engine Hoist, Cherry Picker With Telescopic Boom And Legs, Heavy Duty Steel Folding Shop Crane, Manual Engine Crane
Feature
4400 LBS LIFTING CAPACITY - 64.9 x 35.4 x 55.1 Inch Before Folded. Heavy-duty folding crane with four boom positions features 4400 lbs lifting capacity (maximum), and the steel chain and hook ensure stable lifting during operations.FOLDABLE DESIGN - 55.1 x 29.5 x 27.6 Inch After Folded. The jib and stand can be folded into a compact package to save room when not in use, and the swivel wheels provide ease for mobility. These two features make it easier to carry.
THICKER STEEL MATERIAL - The steel crane is made of high-grade steel, and its surface is covered with rust-proof paint. The piston is polished, designed for a long service time.
FAST LIFTING SPEED - Height Difference in 25.6 - 43.3 inch. With a large diameter steel hydraulic cylinder, lower oil pressure is needed to lift the load. An extended lever is also provided for users to control up and down effortlessly.
VERSATILE APPLICATIONS - This foldable hydraulic engine crane, designed for ventilation uses in the garage, job shop, warehouse, dock, and the like, is an ideal device for carrying and loading heavy stuff.
10. Titan Attachments 0.5 Ton Telescoping Gantry Crane, Portable Shop Lift Hoist, Frame Only, Rated 1,000 LB
Feature
The Telescoping Gantry Crane by Titan Attachments is what your shop needs for all lifting and loading tasks.The adjustable boom raises and lowers to accommodate varying heights.
The 4 locking casters make moving and transporting easy and provide a sturdy base when lifting.
The 1/2 ton capacity covers a large range of items and equipment that can be lifted.
Trolley or hoist not included.
