It’s not that easy to choose the right dewalt nail guns 16 gauge since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top dewalt nail guns 16 gauge on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best dewalt nail guns 16 gauge on the marketbut dont skip to the end!
Best dewalt nail guns 16 gauge
1. DEWALT DCN660B 20V 16 Gauge 20 Finish Nailer
Feature
Integrated LED lightsBump operating mode
20-degree finish nailer
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
Description
DEWALT DCN660B 20V 16 Gauge 20 Finish Nailer2. DEWALT DC618K XRP 18-Volt Cordless 1-1/4 Inch - 2-1/2 Inch 16 Gauge 20 Degree Angled Finish Nailer Kit
Feature
Engine design allows the tool to work as fast as the end user with consistent nail penetration into both soft and hard jointsSequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.
Easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches
Contact Trip Lock-Off allows trigger to be disabled when not in use. 20-degree angled magazine (up to 120 nail capacity) and will accept DEWALT and most other 20-degree angled finish nails
Integrated LED lights for long life and durability; Top cap is impact resistant and easy to remove for troubleshooting
Description
Enjoy the power and efficiency of pneumatic nailing with the DEWALT DC618K heavy-duty 20-degree angled finish nailer kit, which can drive 16 gauge nails from 1-1/4 to 2-1/2 inches in length as rapidly as five nails per second. This cordless nailer is powered by DEWALT's 18-volt XRP batteries, and this kit comes with one battery and a 1-hour charger.
(view larger).
|
Power and Performance
The DC618K's engine design allows the tool to work as fast as you do with consistent nail penetration into both soft and hard joints. The 20-degree angled magazine (with up to 120-nail capacity) will accept DEWALT and Paslode 20-degree nails, and it has a rear-load magazine. You'll have easy access to the nosepiece for the removal of jammed nails without the use of screwdrivers or tool wrenches, and the contact trip lock-off allows trigger to be disabled when not in use.
Comfort and Convenience
You can select sequential operating mode to ensure precision placement of each nail or a bump operating mode that allows you to harness top speed. A 6 position dial enables you to move between applications without having to re-acquire exact depth setting. And at just 8.5 pounds, this tool is lightweight for easy maneuvering and reduced operator fatigue. This nailer also includes integrated LED lights for perfect placement in low-lit or shadowy areas.
DEWALT's XRP Extended-Life Battery System
A tool's only useful if it runs long enough to get the job done, and the DEWALT XRP extended run time batteries keep the DC618K running at full tilt. They provide up to 40 percent more run time than standard Ni-Cad batteries, and any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow.
The DC618K comes with one 18-volt XRP battery and a 1-hour charger.
Warranty
This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's two-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free.
What's in the Box
DEWALT DC618K 20-degree angled nailer; 18-volt XRP battery; 1-hour charger; reversible belt hook; no-mar tip; safety glasses; operating instructions
The DC618K engine works as fast as you do--driving up to five nails per second (view larger). |
3. DEWALT 20V MAX* XR Finish Nailer, Angled, 16GA (DCN660D1)
Feature
Includes Factory WarrantyDescription
The 20 V MAX* 16 gauge angled cordless finish nailer drives 16 20-degree angled finish nails from 1-1/4 In. to 2-1/2 In.. sequential mode for precision placement and bump mode for production speed. Tool-free jam release to quickly and easily clear nail jams.4. DEWALT DCN680D1 Cordless Nailer Kit
Feature
Diagnostics with LED indicator Communicates battery charge status: chargedCharges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite
Automatic shut-off protects excessive discharge of vehicle's battery
*Maximum initial battery voltage (measured without a workload) is 20 volts. Nominal voltage is 18
Description
Charges all DEWALT 12V - 20V max li-ion batteries from a vehicle's power outlet enabling batteries to be charged while driving to work or on a jobsite. Automatic shut-off protects excessive discharge of vehicle's battery. Diagnostics with LED indicator communicates battery charge status: charged, charging, power line problem, replace pack, and battery too hot or too cold.5. DEWALT Finish Nails, 2-1/2-Inch, 16GA, 20-Degree, 2500-Pack (DCA16250)
Feature
Durable; ReliableConsistent drivability for applications
Resists moisture and rust
20-degree angle
Pack of 2,500
Description
This pack of 2,500 DeWalt DCA16250 2-1/2-inch, 16-gauge, 20-degree Finish Nails are galvanized to resist moisture and rust. Ideal for finish work, these nails are designed to work with all DeWalt cordless angled nailers.6. DEWALT Finish Nails, 20-Degree, 2-Inch, 16GA, 2500-Pack (DCA16200)
Feature
Two-inch, 16-gauge, 20-degree angled finish nailsCold-worked carbon steel and galvinized in hot-dip process
Nails resist rust and moisture
Consistent drivability for applications
Ideal for finish work
Description
The DeWalt DCA16200 2-Inch 16 Gauge 20-Degree Angled Finish Nail are manufactured out of cold-worked carbon steel and galvanized in a "hot-dip" process, which ensures that each nail will resist rust and moisture. Ideal for finish work, these 2-inch 16 gauge nails are for use with DeWalt Cordless Angled Nailers and packaged in quantities of 2,500.7. DEWALT 20V MAX XR 16 GA Co
Feature
Authorized Distributor Includes All Documentation and Support.Description
DeWALT DCN662D1 20-Volt 16-Gauge 2.0Ah Cordless Straight Finish Nailer Kit8. DEWALT DCS16200 2-Inch by 16 Gauge Finish Nail (2,500 per Box)
Feature
Durable and reliableConsistent drivability for applications
Ideal for finish work
Comes in a box of 2,500
Each nail will resist rust and moisture
Description
DEWALT DCS16200 2-Inch by 16 Gauge Finish Nail (2,500 per Box)9. DEWALT 20V MAX Cordless Brad Nailer, 18GA, Tool Only (DCN680B)
Feature
Includes Factory WarrantyDescription
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding.
The DEWALT DCN680 18 Gauge Brad Nailer drives 18 gauge brad nails from 5/8" to 2-1/8" which makes it ideal for fastening decorative molding, casing, kitchen crown, and shoe molding. With its brushless motor powered by a DEWALT 20V MAX* lithium-ion battery the DCN680 is ready to go to work without the hassle of using gas, compressor, and hose. Tackle jobs both large and small with the features of a pneumatic tool and the freedom of cordless.
- 100% battery powered: eliminates the hassle of using gas, compressor, and hose
- Brushless motor maximizes runtime and durability
- Micro nose improves line of sight and accuracy of nail placement (Compared to DEWALT DC608)
- Tool-free depth adjustment for precise countersinking of nails
10. DeWalt DWFP71917 16 Gauge Precision Point Finish Nailer with Selectable Trigger
Feature
Tool-free depth-of-drive adjustment for proper setting of nail headsRear exhaust to keep contaminates away from work
Drives straight 16ga finish nails from 1-1/4" to 2-1/2" length
Tool-free jam release mechanism for easy nail removal
Selectable trigger: sequential or contact actuation
Description
Precision point technology: easy nail placement as a result of a smaller nose compared to current DeWalt nailers and No need to compress the contact trip to actuate the tool. Kit includes: nailer, 1/4" swivel fitting, sample finish nails, carrying case and extra no-mar tips.11. DEWALT Finish Nails, 20-Degree, 1-1/4-Inch, 16GA, 2500-Pack (DCA16125)
Feature
Durable & ReliableConsistent drivability for applications
Finishing applications in construction
Durable; Reliable
Consistent drivability for applications
12. DEWALT Finish Nails, 20-Degree, 1-1/2-Inch, 16GA, 2000-Pack (DCA16150)
Feature
Durable; reliableConsistent drivability for applications
Resists moisture and rust
20-Degree angle
Pack of 2, 500
13. DEWALT Finish Nails, 1-1/2-Inch, 16GA, 2500-Pack (DCS16150)
Feature
Consistent drivability for applicationsBox contains 2,500 durable and reliable nails
Made of cold-worked carbon steel and galvanized in a hot-dip
Each nail resists rust and moisture process
Ideal for finish work
14. DEWALT Finish Nails, 2-1/2-Inch, 16GA, 2500-Pack (DCS16250)
Feature
Durable; ReliableConsistent drivability for applications
Resists moisture and rust
Pack of 2,500
15. DEWALT Finish Nailer, 16GA, 1-Inch to 2-1/2-Inch (D51257K), DEWALT Yellow and Black
Feature
Sealed lube dual tech: motor works as an oil free and oil lube unit.Tool-free features: adjustable belt hook, nail depth adjustment, jam clearing, 360 degree exhaust
Uses 1-inch to 2-1/2-inch (25.4 milimeter-65 milimeter) 16 gauge straight collated nails,
Includes carrying case and sample finish nails ( safety glasses are not included.)
Low profile no-mar pad; Sequential action trigger installed