Finding your suitable coyote intake is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best coyote intake including detail information and customer reviews. Let’s find out which is your favorite one.
Best coyote intake
1. Heatshield Products (140008) I-M Shield Intake Manifold Heat Shield
Feature
Fits Boss 5.0L Coyote 2011-2014Withstands 1100 degrees Fahrenheit radiant continuous, 2000 degrees Fahrenheit intermittent
Adhesive good for 300 degrees Fahrenheit
Lowers intake temperatures, Increases up to 12 RWHP
Made in the USA
Description
Stick on horsepower! I-M Shield can increase horsepower (up to 12 RWHP!). It works by shielding the intake manifold and reducing the heat radiating up from the top motor. This lowers intake manifold temperatures creating a more dense fuel and air mixture, creating more power. Think of it as an intercooler for your intake, same physics and chemistry just a different way to get there. Heavy duty adhesive will stick to any clean semi-smooth surface. Simply degrease, then clean surface, then wipe with pre-paint cleaner or isopropyl alcohol, let dry then firmly press the I-M Shield onto the underside of the intake manifold. Use provided edging tape to finish the install. I-M Shield comes pre-cut but may be trimmed with heavy scissors or utility knife! Get your I-M Shield and add some Instant-Muscle and blow the competition away.2. Heatshield Products (140007) I-M Shield Intake Manifold Heat Shield
Feature
Fits 5.0L Coyote 2011-2014Withstands 1100 degrees Fahrenheit radiant continuous, 2000 degrees Fahrenheit intermittent
Adhesive good for 300 degrees Fahrenheit
Lowers intake temperatures, Increases up to 12 RWHP
Made in the USA
Description
Stick on horsepower! I-M Shield can increase horsepower (up to 12 RWHP!). It works by shielding the intake manifold and reducing the heat radiating up from the top motor. This lowers intake manifold temperatures creating a more dense fuel and air mixture, creating more power. Think of it as an intercooler for your intake, same physics and chemistry just a different way to get there. Heavy duty adhesive will stick to any clean semi-smooth surface. Simply degrease, then clean surface, then wipe with pre-paint cleaner or isopropyl alcohol, let dry then firmly press the I-M Shield onto the underside of the intake manifold. Use provided edging tape to finish the install. I-M Shield comes pre-cut but may be trimmed with heavy scissors or utility knife! Get your I-M Shield and add some Instant-Muscle and blow the competition away.3. A-Team Performance EFI Fabricated Intake Manifold 11-14 Compatible with Ford 5.0L Coyote
Description
NEW A-TEAM PERFORMANCE EFI Fabricated Intake Manifold 11-14 Ford 5.0L Coyote CLEAR ANODIZED FINISH OVERVIEW We designed our Velocity fabricated aluminum sheet metal intake manifold to improve the look and performance of your Coyote engine. The runners are velocity stacked, allowing air to move more smoothly at high velocities. The manifold is constructed of 3.5mm thick T-6061 aluminum and is TIG welded to ensure consistent strength and performance. Individual port o-rings guarantee a good seal with the cylinder heads and throttle body. Available in clear or black anodized finishes, this manifold will also give your engine bay a nice, clean aesthetic. QUALITY CONSTRUCTION The first thing people notice when taking a closer at our Velocity intake manifold is the beautiful TIG (tungsten inert gas) welding throughout - all done by hand. This ensures solid construction that won't fail under stress. The head flanges are 7/16" thick, and the plenum is constructed of 3.5mm T-6061 aluminum, which means it can easily handle up to 25 lbs of boost - more than enough for most street performance applications. INTELLIGENT DESIGN In addition to the premium build quality, our fabricated manifold includes intelligent design features that set it apart from the rest. A 90mm throttle body opening and velocity-stacked intake runners guarantee maximum airflow for high-horsepower applications, and individual port o-rings ensure a tight seal to your cylinder heads. We designed the manifold to easily anywhere the Boss manifold would have been, which means fitment won't be an issue. SPECIFICATIONS INJECTION STYLEMulti-port FUEL RAIL TYPECustom TSP Design FUEL RAILS INCLUDEDNo THROTTLE BODY BORE SIZE90mm THROTTLE BODY BOLT PATTERNStandard OE 4-Bolt Coyote Pattern THROTTLE BODY INCLUDEDNo FLANGE MATERIALT-6061 Billet Aluminum PLENUM THICKNESS3.5mm PLENUM MATERIALT-6061 Sheet Aluminum VACUUM PORTSNPT 1/8 x 3 and NPT 1/4 x 1 OVERALL HEIGHT8"4. Black Peformance Efi Fabricated Intake Manifold For 2011-2014 Ford coyote 5.0L
Feature
For 11-14 Ford coyote 5.0LThrottle Body Opening: 102mm
Intake total length: 20 inches
3/4 high flow fuel rails: 2 included
Vacuum Ports: 3
Description
Title: Intake ManifoldApplication: For 11-14 Ford coyote 5.0L
Description:
Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock)
Material Thickness: 3mm
Throttle Body Opening: 102mm
Intake total length: 20 inches
3/4 high flow fuel rails: 2 included
Vacuum Ports: 3
Fabrication: TIG Welded Aluminum
The intake will not bend or flex With Boost Or Vacuum.
Fuel Rails With Braided Fuel Line Is Included
Not only does this manifold make your engine look just amazing when you pop the hood, it also adds a TON of air flow!!
This is a must have for any high performance racing engine!
Package Includes:
1 Set Intake Manifold (as shown the picture)
Note:
All of the items in our shop will come to you with the tracking number.
5. Peformance Efi Fabricated Intake Manifold With Fuel Rails For 2011-2014 Ford coyote 5.0L Black
Feature
Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock)Material Thickness: 3mm
Throttle Body Opening: 102mm
Intake total length: 20 inches
3/4 high flow fuel rails: 2 included
Description
Title: Intake ManifoldApplication: For 11-14 Ford coyote 5.0L
Description:
Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock)
Material Thickness: 3mm
Throttle Body Opening: 102mm
Intake total length: 20 inches
3/4 high flow fuel rails: 2 included
Vacuum Ports: 3
Fabrication: TIG Welded Aluminum
The intake will not bend or flex With Boost Or Vacuum.
Fuel Rails With Braided Fuel Line Is Included
Not only does this manifold make your engine look just amazing when you pop the hood, it also adds a TON of air flow!!
This is a must have for any high performance racing engine!
Package Includes:
1 Set Intake Manifold (as shown the picture)
Note:
All of the items in our shop will come to you with the tracking number.
6. A-Team Performance EFI Fabricated Intake Manifold 11-14 Compatible with Ford 5.0L Coyote BLK
Description
NEW A-TEAM PERFORMANCE EFI Fabricated Intake Manifold 11-14 Ford 5.0L Coyote CLEAR ANODIZED FINISH OVERVIEW We designed our Velocity fabricated aluminum sheet metal intake manifold to improve the look and performance of your Coyote engine. The runners are velocity stacked, allowing air to move more smoothly at high velocities. The manifold is constructed of 3.5mm thick T-6061 aluminum and is TIG welded to ensure consistent strength and performance. Individual port o-rings guarantee a good seal with the cylinder heads and throttle body. Available in clear or black anodized finishes, this manifold will also give your engine bay a nice, clean aesthetic. QUALITY CONSTRUCTION The first thing people notice when taking a closer at our Velocity intake manifold is the beautiful TIG (tungsten inert gas) welding throughout - all done by hand. This ensures solid construction that won't fail under stress. The head flanges are 7/16" thick, and the plenum is constructed of 3.5mm T-6061 aluminum, which means it can easily handle up to 25 lbs of boost - more than enough for most street performance applications. INTELLIGENT DESIGN In addition to the premium build quality, our fabricated manifold includes intelligent design features that set it apart from the rest. A 90mm throttle body opening and velocity-stacked intake runners guarantee maximum airflow for high-horsepower applications, and individual port o-rings ensure a tight seal to your cylinder heads. We designed the manifold to easily anywhere the Boss manifold would have been, which means fitment won't be an issue. SPECIFICATIONS INJECTION STYLEMulti-port FUEL RAIL TYPECustom TSP Design FUEL RAILS INCLUDEDNo THROTTLE BODY BORE SIZE90mm THROTTLE BODY BOLT PATTERNStandard OE 4-Bolt Coyote Pattern THROTTLE BODY INCLUDEDNo FLANGE MATERIALT-6061 Billet Aluminum PLENUM THICKNESS3.5mm PLENUM MATERIALT-6061 Sheet Aluminum VACUUM PORTSNPT 1/8 x 3 and NPT 1/4 x 1 OVERALL HEIGHT8"7. TSP Velocity Black Fabricated Aluminum Coyote Intake Manifold 84050BK
Feature
Fits 2011-2014 Ford 5.0L Coyote engineFabricated aluminum with black finish
8" overall height with angled throttle body flange for added clearance
Requires TSP fuel rails 84051
Description
TSP's fabricated aluminum sheet metal Velocity intake manifold is designed to improve the look and performance of your LS engine. The runners are velocity stacked, allowing air to move more smoothly at high velocities. The manifold is constructed of 3.5mm thick T-6061 aluminum and is TIG welded to ensure consistent strength and performance. Individual port o-rings guarantee a good seal with the cylinder heads and throttle body.8. NEW EFI Fabricated Intake Manifold For 11-14 Ford coyote 5.0L WITH Fuel Rails 102mm Throttle Body Opening BLACK 2012 2013
Feature
Application: For 11-14 Ford coyote 5.0LThrottle Body Opening: 102mm
Intake total length: 20 inches
Black 3mm Sheet Metal Aluminum
Black Fuel Rails With Braided Fuel Line Is Included
Description
Title: Intake ManifoldApplication: For 11-14 Ford coyote 5.0L
Description:
Intake Manifold Height: 9.00 inches (approx. 3 inches higher than stock)
Material Thickness: 3mm
Throttle Body Opening: 102mm
Intake total length: 20 inches
3/4 high flow fuel rails: 2 included
Vacuum Ports: 3
Fabrication: TIG Welded Aluminum
The intake will not bend or flex With Boost Or Vacuum.
Fuel Rails With Braided Fuel Line Is Included
Not only does this manifold make your engine look just amazing when you pop the hood, it also adds a TON of air flow!!
This Ford 5.0L Coyote EFI Fabricated BLACK Aluminum Sheet Metal Intake Manifold With Black Fuel Rails THE STOCK THROTTLE BODY AND FUEL INJECTORS FIT THIS INTAKE
WE DESIGNED OUR VELOCITY FABRICATED ALUMINUM SHEET METAL INTAKE MANIFOLD TO IMPROVE THE LOOK AND PERFORMANCE OF YOUR COYOTE ENGINE.
THE RUNNERS ARE VELOCITY STACKED, ALLOWING AIR TO MOVE MORE SMOOTHLY AT HIGH VELOCITIES.
THE MANIFOLD IS CONSTRUCTED OF 3.5MM THICK T-6061 ALUMINUM AND IS TIG WELDED TO ENSURE CONSISTENT STRENGTH AND PERFORMANCE.
INDIVIDUAL PORT O-RINGS GUARANTEE A GOOD SEAL WITH THE CYLINDER HEADS AND THROTTLE BODY.
AVAILABLE IN CLEAR OR BLACK ANODIZED FINISHES, THIS MANIFOLD WILL ALSO GIVE YOUR ENGINE BAY A NICE, CLEAN AESTHETIC.
Package Includes:
1 Set Intake Manifold (as shown the picture)
Note:
All of the items in our shop will come to you with the tracking number.
9. SNIPER EFI SHEET METAL FABRICATED INTAKE MANIFOLD
Feature
Sheet Metal Fabricated Intake Manifold for 2015-up Ford 5.0L Coyote engines 90mm Throttle Body opening3mm (1/8") thick T6061 Sheet Aluminum construction, more durable than competitive intakes
Intakes include 3/8" Fuel rail kits (w/ Holley Sniper logo )
Runner lengths with tapered top on EFI intakes designed to increase velocity and more evenly distribute airflow to all 8 cylinders
00% TIG welded
Description
Holley continues to expand its offering of Sheet Metal Fabricated Intake Manifolds to now cover 2015-present Ford Coyote 5.0L V8 engines.10. TSP Velocity Clear Anodized Fabricated Aluminum Coyote Intake Manifold 84050CA
Feature
Fits 2011-2014 Ford 5.0L Coyote engineFabricated aluminum with black finish
8" overall height with angled throttle body flange for added clearance
Requires TSP fuel rails 84051
