It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 betafpv x-knight. Its followed by an in-depth review of each betafpv x-knight. Hopefully, once you are done reading this article, you will be well informed about betafpv x-knight and be able to select the right betafpv x-knight for you without any hesitations.
Best betafpv x-knight
1. BETAFPV 2pcs Mini FPV Canopy PE Black for 19-20mm Camera like Caddx Ratel Turtle V2 Camera X-knight Beta85X HD Beta75X HD FPV Whoop Drone Quadcopter
Feature
CustomizedBETAFPV Mini canopy is customized for 19-20mm camera, which is fitting for DJI HD VTX, Caddx Ratel and Turtle V2 cameraInjection Molded CanopyThe material of this mini canopy is PE, adopted injection molding process, which is harder, not easy to break, can provide extra protection for the drone
Adjustable AngleThe canopy is with 25-35adjustable angle, support different fly situation like freestyle or racing
Frame&VTXThe canopy is compatible with A01 VTX and toothpick carbon fiber frames like TWIGX-knight 4-5inch FPV carbon fiber frames
Weight&PackageOnly weighs 3.8g/pc, you will receive 2pcs black mini canopies. Super simple installation and more stable
2. BETAFPV Cetus FPV RTF Drone Kit for Brushed Racing Drone from Player-to-pilot with LiteRadio 2 SE Remote and VR02 FPV Goggles Ready to Fly FPV Drone Kit for Beginners
Feature
From Player To Pilot BETAFPV Racing Drone has entipatied in many competions all over the world, such as DDC,DRL ,etc. The Cetus FPV kit comes with a special design of Cetus brushed whoop quadcopter, LiteRadio 2 SE, and VR02 FPV Goggles. Auxiliary flight function is suitable for novices, greatly reducing the threshold of operating. 3 Flight Modes allow you to achieve from a beginner to a professional pilotAltitude Hold Function Altitude hold function enables Cetus quadcopter to Auto-Hover. The quadcopter can stay at a current height when pilots' hands are off the transmitter. The flight has never been so easy for a beginner. Please note that The altitude hold function is only available in N mode
Self-protection Function The Cetus quadcopter can make an emergency landing when it loses control or in low battery. It will also automatically disarm and drop on ground once it has a strong collision with the object. No more worry about loss and crash
LiteRadio 2 SE&VR02 Goggles LiteRadio 2 SE transmitter acts as a USB Joystick when connected to a personal computer and uses it to play FPV simulators like EREADRONE to learn flying. VR02 First-Person-View FPV goggles is more compact and exquisite, less than 300g lightweight is more comfortable for wearing and carrying. Super easy to operate, perfectly suitable for the beginner or experienced FPV racer
Manual&Package User manual is included, pilots will master FPV drone easier by it. All parts are stored in a special customized carry case, which provides better protection and it is easy to carry. After-sales service: Cetus kit requires certain operating skills. If you are a beginner and have any questions about the operation of our products, please contact our customer service immediately and we will reply to you within 12 hours
3. BETAFPV 6pcs Amass XT60 Plug Male Connector 80mm with 16AWG Silicone Cable for F4 AIO 20A Toothpick FC X-Knight 4inch FPV Toothpick Quadcopter
Feature
Electrolytic CapacitorThis XT60 plug connector has added the electrolytic capacitor specification with 25V/680F, for protecting ESC boardCable MaterialAdopted heat-resistant soft silicone cable, the maximum temperature resistance is 200
ApplicationBETAFPV XT60 plug male connector is fitting for F4 AIO 20A toothpick FC and 4-5S X-Knight 4inch FPV toothpick quadcopter and TWIG quadcopter
Support PowerThe power cable with XT60 plug male connector can support 4-5S power. You are able to use with F4 AIO 20A toothpick FC and X-Knight 4inch FPV toothpick quadcopter, get more punch on power
Size&WeightXT60 plug male connector has 80mm length with 16AWG silicone cable, weighs 8.9g/pc
4. BETAFPV 4pcs 1506 3000KV Brushless Motor 4-6S FPV Motor for 20A Toothpick F4 AIO FC X-Knight 4'' Frame
Feature
FCPerfectly match with 20A Toothpick F4 AIO FC, it will bring you powerful flight experienceFrame & Props1506 3000KV motor is the best choice for TWIG 3''/ 4''/ 5'' frameX-Knight 4'' frame, you can use 3 "- 5" props with this match
CableFor offering pilots better cutting and soldering experience, it comes with 80mm long, 24AWG cable while no pre-solder plug
Weight& packageWeight 16.2g/pc, you will get 4pcs 1506 3000KV motor with 1 set of M2 srews
5. BETAFPV 8pcs 300mAh 1S PH2.0 4.35V LiHV Lipo Connector Battery with 30C/60C Continuous Discharge Compatible for RC Racing Drone Quadcopter Like Beta65S Brushed FPV Drone
Feature
The upgrade version 1S 300mAh battery is the great choice of Tiny Whoop Blade inductrix with the connector plug of JST-PH2.0 PowerWhoop connector.Compared with 260mAh battery, you can get a longer flight time of 5'10'' and more power if you use it on Beta65s BNF.
This BETAFPV 1S 300mAh battery's weight is 7.7g with the larger capacity of 30C.
Newly developed chemistry 1S Battery, longer flight time and safer charging situation. Safer, higher quality and more powerful rate brings you higher speed flying experience.
Please Note: As a FPV battery, Don't over-charge, or over-discharge batteries. Don't put it beside the high temperature condition. Don't throw it into fire. Don't throw it into water.
6. BETAFPV Literadio 2 SE Transmitter Left Throttle Frsky D16 RC Remote Controller with FPV Simulator Function for FPV Racing Drone
Feature
FPV SimulatorCompared with other remote controllers, LiteRadios 2SE has the function of FPV simulator which can acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.Built-in Battery The LiteRadio 2 SE continued working time for a fully charged battery is about 8 hours, bringing an excellent endurance performance and enjoy control.
Joystick Calibration Manually calibrate the joystick. The LiteRadio 2 SE joystick data may offset and can calibrate after it has been used for a period of time (if joysticks are hit by physical).
System UpgradeUpdates with BETAFPV self-developed LiteRadio System.Player can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitterwhich is more convenient for the beginner racer to operate.
Multi-Protocol ModeLiteRadio 2 SE Supports the Frsky / Futaba, pilots can easily change Futaba, Frsky D8, Frsky D16 and Frsky LBT D16 mode via the radio transmitter. Please kindly note: D16 protocol currently does not support the Frsky receivers with ACCST 2.0 firmware or higher, and it can only bind with ACCST 1.X firmware version XM+ receivers.
7. BETAFPV ExpressLRS 2.4G LiteRadio 2 SE Radio Transmitter Remote Controller with Built-in 1000mAh 1S Battery for FPV RC Racing Drones Multirotor Simulator Joystick Calibration - Mode 2 Left Throttle
Feature
ExpressLRS 2.4G ProtocolBETAFPV ExpressLRS 2.4G LiteRadio 2 SE radio transmitter is the World's First ELRS radio controller. It comes with build-in ELRS 2.4G TX, which can achieve long-range flying with your dronesBETAFPV ConfiguratorThis transmitter supported BETAFPV Configuration with the function of radio controller setup, Full function of the ExpressLRS configuration, Channel mixer for fix wing drones, and firmware update
PerformanceThis ELRS 2.4G protocol radio transmitter built-in 1000mAh 1S battery, you can charge it by type-c cable instead of replacing battery. It has a total of 8 channels. Supports 3 RF powers of 25mW, 50mW and 100mW, and packet rates of 50Hz, 150Hz, 250Hz and 500Hz
FPV SimulatorThis transmitter has the function of FPV simulator like other versions of LiteRadio 2, which can act as a USB Joystick when connected to a personal computer, suitable for FPV novices to play FPV simulators like EREADRONE
About BindThe stock firmware of the TX module manufactured by our company is ELRS V1.0.0-RC5(the fifth release candidate version) and the Lite receiver and Micro TX Module is V1.1.0; Please note that the firmware version of the Transmitter and the receiver or the TX module should be the same one and then could be bound together. If you don't know the firmware version, please contact us directly and we will solve the problem for you.
8. BETAFPV 2pcs HD Digital VTX Canopy PP Black Blue for Caddx Vista Nebula Nano on 75-200mm Brushless Frame Like Beta75X Beta85X Beta95X Whoop Frame TWIG X-Knight Toothpick Frame
Feature
New DesignedWith the new knight helmet looks. HD Digital VTX canopy is specially designed for Caddx Vista and Nebula Nano camera. Installed with Nebula camera needs its camera mount to lockApplicationThis canopy is not only fitting for 75/85/95mm brushless whoop frame but also compatible with TWIG and X-knight toothpick frame kit
MaterialMade of PP material, weighs 3.73g/pc, light but durable. The angle is adjustable from 25-45 degree, it can further fulfill the different requirements of recording to offer pilots a better flight experience
Compatible Toothpick FrameNeeded to add an extra increased seat when installed on toothpick frame with Digital VTX camera
PackageIncluded 2 colors of HD Digital VTX canopies which are black and blue, 2 increased seats
9. BETAFPV 1S LiPo Battery Charger Board 6 Ports Type-C Portable Charger 4.35V 1A 1S LiHV Charger for 1S RC Drone Quadcopter Lipo Battery with BT2.0/PH2.0 Connector Like 300mAh 1S Lipo Battery
Feature
2 Types Battery PortsBETAFPV 6 ports 1S charger is designed for charging 1S lipo battery with BT2.0 connector and PH2.0 connector. But please DO NOT charge 2 batteries in one port at the same time. Otherwise, the battery life will be reduced or the battery will be damaged.Designed&LED LightsThis portable charger board is designed and manufactured by BETAFPV. LED lights indicate when charging status of each battery.Greenlight indicates charging, light off whenfully charged.
30W InputIt supports a maximum input of 30W. 6-port simultaneous charging can be achieved, and a single-port charging current can reach 1A if you use 30W adapter. Perfectly fulfil the requirement for fast charging of multiple batteries.
Charging ProtocolsThis 1S lipo battery charger board supports PD3.0, QC3.0, BC1.2, etc. fast charging protocols. You can get 6pcs BT2.0 300mAh 1S battery of a full charge in 25mins if you are using 30W fast charging adapter.
More ApplicationsThe charger board designed with built-in type-c port, which is compact and portable. It is convenient to use type-c cable to charge through PC, power bank, etc
10. BETAFPV 4pcs BT2.0 450mAh 1S Battery 4.35V 30C/60C FPV Lipo with BT2.0 Connector for FPV Tiny Whoop 1S Brushless Whoop Drone Like Like Meteor75 Cetus Pro FPV Kit HX115 ELRS
Feature
1.0mm Banana ConnectorBT2.0 connector AKA 1.0mm Banana Connector decreased internal resistance of connector effectively by upgrading the crimped pins to 1.0mm banana connector and increasing the cross-sectional area of 1.0mm banana connectorDischarge RateBy solving the problem of voltage sag, the discharge of the 450mAh 1S BT2.0 lipo becomes more efficient. Pilots can enjoy more flight time without disturbance of low voltage warning
High efficiencyBT2.0 450mAh 1S 30C Battery has stable current/voltage output and high efficiency. All 1S brushless drones will gain powerful and perfect performance with it
More durableCompared with the PH2.0 crimped pins, BT2.0 connector is more durable which can discharge more currents in the same capacity and provide far more power
High qualityHigh-end technology to guarantee high quality and consistent performance. If any problem with our product, please feel free to contact us.
