It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 ball joint kit tool. Its followed by an in-depth review of each ball joint kit tool. Hopefully, once you are done reading this article, you will be well informed about ball joint kit tool and be able to select the right ball joint kit tool for you without any hesitations.
Best ball joint kit tool
1. OTC 7249 Ball Joint, U-Joint, and Brake Anchor Pin Service Kit with Storage Case
Feature
OTC's Ball Joint, U-Joint, and Brake Anchor Pin Service Kit removes and installs press-fit parts such as ball joints, universal joints, and truck brake anchor pinsClamp frame features heavy duty materials and construction to prevent distortion in severe use cases
Contains 3 receiver tubes - 2-3/4 inch ID x 3 inch OD, 2-1/4 inch ID x 2-1/2 inch OD, and 1-3/4 inch ID x 2 inch OD
Includes 1 each; installing cup, receiving cup, and installing adapter
Sturdy blow molded hard case keeps contents protected and secure when not in use
2. Astro Pneumatic Tool 7865 Ball Joint Service Tool with 4-wheel Drive Adapters
Feature
Heavy duty forged steel tool and set is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pinsWill remove rusted and corroded parts
Set contains C-frame press, 3 receiver tubes sizes: 2-3/4x3"", 2-1/4x 2-1/2 & 1-3/4x2, installation and removing adapters
Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)
Blow molded case for easy storage and transport
3. Astro Pneumatic Tool 7897 Ball Joint Service Tool and Master Adapter Set
Feature
Removes and replaces press-fit upper and lower ball jointsForged C-frame press alone can be used to remove and replace universal joints
Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles
Blow molded case keeps the tools organized and easy to transport
4. Powerbuilt 23 Piece Ball Joint and U Joint Service Set - 648617
Feature
Harm Bal/ crank PULLEY PTool solutions for most all situations
Built to exceed tool standards
Designed to help you remove and install press-fit type ball joints without taking the control arm off the vehicle
Kit services: most Domestic and import rear wheel drive vehicles
Remove and install pressed-in Ball Joints found on most vehicles
Remove and install special threaded upper Ball Joints found on many Chrysler vehicles
Allows changing the ball joint without removing the Control Arm from the vehicle
Tools can also be used to remove and install U Joints
Kit includes step-by-step usage instructions
5. ABN Ball Joint Press Tool Set - 10Pc Ball Joint Remover Tool Ball Joint Press Kit Service Tool Kit with Adapters
Feature
SERVICE YOUR VEHICLE: Keep your suspension system running smoothly by replacing worn ball joints with the ABN Ball Joint Removal Tool and Bushing Press Kit; 10 piece ball joint tool kit includes receiver tubes and adapters to work on most press-fit upper and lower ball jointsREMOVE PARTS EASILY: Remove worn, rusted, and corroded parts with this ball joint remover kit; Works as a ball joint separator tool, u joint press, tie rod end remover tool, and suspension bushing removal tool
PACKAGE CONTENTS: Ball joint removal kit includes (1) C-frame ball joints press and forcing screw, (3) installation adapters with cups, (3) removal adapters with cups, (3) receiver tubes (2.75 x 3 inch, 2.25 x 2.5 inch, and 1.75 x 2 inch)
BUILT TO LAST: Heavy-duty forged steel provides maximum strength and durability, while the black-oxide finish helps to resist rust and corrosion; Designed to fit most domestic and imported 2 wheel drive (2WD) and 4 wheel drive (4WD) cars and light trucks with press-fit type ball joints
CONVENIENT STORAGE: 11 x 3 x 15 inch (27.9 x 7.6 x 38.1cm) plastic blow-molded carrying case with handle provides safe storage, quick organization, and easy transportation
6. Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
Feature
ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
7. Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4wd Adapters, for Most 2WD and 4WD Cars and Light Trucks (BK)
Feature
ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4x4 Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
8. Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks (BL)
Feature
ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11 x 3 x 15 inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
ORION MOTOR TECH - We pursue outstanding quality and professional technical support. If you are not satisfied with this product or if you have any question, please feel free to let us know.
9. Ball Joint Service Adapter for Jeep/Dodge
Feature
PERFECT FITMENT: Works with 1984-newer "downsized" Jeep Wagoneer, and 2WD and 4WD Cherokee and Comanche; 1987-newer Jeep Wrangler; 1990-newer Jeep Renegade; 1993-newer Jeep Grand Cherokee; 1994-newer Dodge Ram 1/2-ton 4WD pickupSUPERIOR QUALITY: Machined from high quality steel to ensure great tolerance and resistance to corrosion and rust. No pieces of steel will stuck between the cup and the axle. No compromises.
APPLICATION: Adapters designed to both install new and receive old pressed out ball joints. (Use with the OTC 7249 ball joint set to remove or install aftermarket and original equipment upper and lower ball joints)
ADVANTAGES: These adapters are awesome assistants to remove and install the offset ball joints used to change caster/camber, making the job much easier and safer than just using the generic set of adapters which come with many ball joint presses.
SATISFACTION GUARANTEE: If you're not 100% satisfied with our Adapter Kit, simply return it for a full refund in 30 days, no questions asked money back guarantee. Premium Support & 12 months Warranty.
10. Orion Motor Tech 5PCS Ball Joint Separator Tie Rod End Remover Pitman Arm Puller Service Splitter Removal Tool Kit (BL)
Feature
Everything you need for a fast & effective separation pull removal of stubborn ball joint, front tie rod ends and pitman arm on most domestic and imported models. PERFECT FOR: most compact cars, mid-size cars and light pickup trucks. PROBABLY UNFIT: most full-size cars, mid-size and full-size pickup trucks.You will get 1x Ball Joint Separator, 1x Tie Rod and Ball Joint Remover, 1x Conical Pitman Arm Puller, 1x Pitman Arm and Tie Rod End Puller, 1x Pitman Arm Puller, 1x well-organized ABS case. Made of heat-treated alloy steel, with great strength and durability, all tools were packed in a convenient ABS carrying case for easy storage and transportation.
Pitman Arm and Tie Rod End Puller: the versatile design allows this tool to be used as a pitman arm remover for many small, domestic rear wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles _____ Pitman Arm Puller: this puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws shaped to fit the job, ensuring a positive grip every time.
Conical Pitman Arm Puller: designed to fit Pitman arms on domestic cars and light-duty trucks. _____ Ball Joint Separator: for separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints, 1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity.
Tie Rod and Ball Joint Remover: a universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
