When it comes to choosing your arduino nano v3 case, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best arduino nano v3 case. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best arduino nano v3 case.
Best arduino nano v3 case
1. ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.
2. NETGEAR Wi-Fi Range Extender EX3700 - Coverage Up to 1000 Sq Ft and 15 Devices with AC750 Dual Band Wireless Signal Booster & Repeater (Up to 750Mbps Speed), and Compact Wall Plug Design
Feature
FASTER WIFI SPEEDS - Combined speeds up to 750 MbpsFASTLANE TECHNOLOGY - Establish one super high-speed connection; ideal for HD streaming & gaming
ETHERNET PORT - Connect a wired device like a game console or a smart TV to your WiFi network
SIMULTANEOUS DUAL BAND WIFI - Extend 2.4 & 5GHz WiFi to allow for a more reliable dedicated WiFi network for video and gaming reduce interference
TWO WIFI MODES - Extend existing WiFi connection or create a new AC WiFi access point
NOTE: Refer the User Manual before use
Ideal for extending WiFi to devices like the iPhone 6, Samsung Galaxy S5, and Samsung Galaxy Tab 3
Dual band WiFi up to 750 Mbps and security is Wifi protected access (WPA/WPA2-PSK) and WEP
Supports new 802.11ac & b/g/n WiFi devices
External antennas for better performance, Access Point mode creates a WiFi hotspot using a wired Ethernet connection
Description
NETGEAR AC750 WiFi Range Extender (EX3700-100NAS). System Requirements:2.4 and/or 5GHz 802.11 a/b/g/n/ac wireless router or gateway,Microsoft. Internet Explorer. 8.0, Firefox. 20, Safari. 5.1, Google Chrome 25.0 browsers or higher. Trouble shooting tip- If you cannot get a WiFi connection working, you can use an Ethernet cable to connect your computer to the extender. Data throughput, signal range, and wireless coverage per sq. ft. may vary due to differences in operating environments of wireless networks, including without limitation building materials and wireless interference. Operating temperature:32to 104F3. Duracell - 2032 3V Lithium Coin Battery - with Bitter Coating - 4 count
Feature
BITTER TASTE DISCOURAGES SWALLOWING: Non-toxic, bitter coating helps prevent accidental ingestionCHILD SECURE PACKAGING: Nearly impossible to open without scissors
LONG-LASTING POWER: Reliable and efficient power for devices like key fobs, remote controls, thermometers, and many others
Equivalent to : DL2032 , CR2032. Best used for - Medical devices like thermometers, Security and fitness devices, watches, remotes, calculators and key fobs. 225 mAh
4. AITRIP for Arduino Nano V3.0, Nano Board CH340/ATmega328P with USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 With1 Cable)
Feature
The Nano is using the chips ATmega328P and CH340, Replace FT232RL.*It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Comes with 3 packs of Nano V3.0 Micro Controller Module, each Nano V3.0 Micro Controller module is equipped with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers), no welding needed. You can download CH340 Driver from download link in the product description below. also it has 1 cable
Uses the CH340G instead of the FTDI FT232RL IC which can improve the transfer speed, increase the stability in windows and solve the issues with FTDI drivers bricking non-original chips, ATMEGA328P offers even more programming and data memory space.
USB connection: the Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27); The power source is automatically selected to the high voltage source
5. KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry Pi Programming, Electronics Components STEM Education Set for Kids Teens Adults + Tutorial
Feature
This sensor kit comes with 37 basic sensors and modules, which is good for learning basic knowledge about sensors. The main controller is Not Included.It comes with detailed tutorials which include pictures and code and 37 projects, explained step by step. Note we provide arduino tutorials, without Raspberry Pi tutorials.
Each module has 3-4 pins broken out that make it easy to plug into a solderless breadboard or hook up to with DuPont wires. They are intended to be used with the Arduino platform, but can also be used with the Raspberry Pi platform as well.
Packed well in nice box, also each item packed well separately.
High quality kit for those beginners who are interested in programming. 100% compatible with Arduino R3, MEGA 2560, NANO, Raspberry pi and more.
6. RobotDyn - Nano I/O Expansion Shield, for Arduino Nano V3 pinout. (Assembled)
Feature
Pinheaders for All the digital I/O ports and analog I/O ports, each IO port has a standard positive and negative power interface. Digita I/0 - 14 ports, Analog In 8 ports. Multiple pinheaders for I2C interface on the board, convenient and connection up to 6 of the I2C device. Serial (RX/TX) port pin header with power.Power stabilizer for 5V and current to 1A. DC Jack Socket and Diode with a protection of wrong power connection.
RESET button in available place.
Compatible with Arduino Nano v3.0 pinout
7. ICQUANZX 3PCS Nano Terminal Adapter Shield Expansion Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P-AU Module
Feature
It provided a nice platform for wiring circuits for Arduino Nano. It can connect a large number of digital lines for Arduino while maintaining the footprint of the original Nano.The board is fully assembled. No soldering required. It can work very well for Arduino Nano projects.
This item is a terminal expansion adapter, designed for Arduino Nano V3.0.
You can use this adapter to easily hook up for Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard.
It lables for Arduino Nano version 1.0, however you can still use this adapter for the new version V3.0.
8. WYPH Mini Nano V3.0 Module ATmega328P 5V 16MHz CH340G Chip Microcontroller Development Board for Arduino Without USB Cable (Not-soldered Nano 3pcs)
Feature
The header pins haven't been soldered for this package and it comes without usb cable.It uses the chip ATmega328P CH340 instead of FT232RL. You can start with various electronic projects by using the for Arduino software (IDE). It has everything that for Arduino/Genuino UNO has, even with more analog input pins and onboard +5V AREF jumper.
It is a smallest, complete, and breadboard friendly board and 100% compatible with the official for Arduino Nano card, and fully compatible with Windows, Mac and Linux operating system.
It can be powered via USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27).
This board has 22 digital inputs and outputs, and 8 analog inputs - a module with many interfaces. It is enough for most applications.
9. WYPH Nano Terminal Adapter Shield Expansion Board for Arduino Nano V3.0 AVR ATMEGA328P-AU Module (Terminal Adapter 3pcs)
Feature
This item is a terminal expansion adapter, designed for Arduino Nano V3.0.The board is fully assembled. No soldering required. It can work very well for Arduino Nano projects.
It provided a nice platform for wiring circuits for Arduino Nano. It can connect a large number of digital lines for Arduino while maintaining the footprint of the original Nano.
You can use this adapter to easily hook up for Arduino Nano to an outside world via hook up wires, and It can be used in conjunction with or in place of a breadboard.
It lables for Arduino Nano version 1.0, however you can still use this adapter for the new version V3.0.
10. MakerFocus Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Ar duino
Feature
Matters Need Attention: Before running the procedure, pls install the corresponding computer system driver. Drivers: directly from the chip manufacturer: WCH 340 product home page: http://www.wch.cn/product/CH340.html; http://www.wch.cn/download/CH341SER_LINUX_ZIP.html (linux should operate fine without the driver); http://www.wch.cn/download/CH341SER_MAC_ZIP.html; http://www.wch-ic.com/download/list.asp?id=127 (windows); http://bit.ly/2pMF4in.NOTE: If you want itto work on a Mac, please install the diver from this: https://drive.google.com/drive/folders/1phezjJtQW0vav34RoivsAzjF0ugmqjgn?usp=sharing; If you want itto workunder Windows 10, You must turn off automatic updates before you install the driver, please install the diver from this: https://drive.google.com/drive/folders/1tl6sVGVduyH1JHfaYdMqeMGKdo-rg3im?usp=sharing.
If you need an older driver, pls get it from GitHubplease read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html; More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html
Small Ar duino UNO Board: It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper; More Breadboard Space: Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
Specification: The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source. Usage: The Nano is 100% compatible with Ar duino, with the same chips ATmega328P and CH340 with the official version.
