If you looking for aluminum jack low profile then you are right place. We are searching for the best aluminum jack low profile on the market and analyze these products to provide you the best choice.
Best aluminum jack low profile
1. Arcan 3-Ton Quick Rise Aluminum Floor Jack with Dual Pump Pistons & Reinforced Lifting Arm (A20018)
Feature
3-ton capacity while only weighing 56 poundsReinforced lift arm for added strength, chassis torsion control and durability
Dual pump pistons for fast rising action, 3.6" to 19.4"
Piston dust shields to prevent hydraulic contamination
Bypass and overload valves prevent over-extension of hydraulic ram and jack use beyond rated capacity
Description
Arcan's professional-quality aluminum Floor Jack has a 3 ton lift capacity and a 3-3/4 inches minimum lift height for easy access under low-profile vehicles. The ball bearing-mounted rear swivel caster wheels and wide track front wheels provide easy maneuverability and jack stability under load and a saddle pad protects the vehicle's frame and components. Lift capacity is 3 tons, minimum lift height is 3-3/4 inches and maximum lift height is 18-1/8 inches. Dimensions are 31 inches length by 12-1/2 inches width by 7 inches height.2. JEGS 80077 Professional Low-Profile Aluminum Floor Jack
Feature
3-TonLow-Profile -...
Weight:...
Lifting Capacity:...
4-9/16" Dia. Lifting...
Description
Professional Low-Profile Aluminum Floor Jack3. NOS NSJ0301 3-Ton Aluminum Service Jack
Feature
Lift capacity: 3 Tons (6,000-Pound)Height range: 3.75 in to 18.125 in
Ultra lightweight aluminum construction at just 27-Pound. Thick frame side plates and reinforced lift arm for added strength, chassis torsion control and durability
Safety valve prevents overloading
2 Piece handle with bumper pad
Description
This aluminum service jack has a lift capacity: 3 Tons (6,000-Pound) and height range: 3.75 in to 18.125 in. Ultra lightweight aluminum construction at just 27-Pound It features a safety valve prevents overloading, dual pump for rapid lifting, universal joint release mechanism provides precise control and 2 piece handle with bumper pad. Side handles for easy transporting. Complies with the ASME PALD 2009 Standard.4. TONDA Aluminum 2.5 TON Trolley Low Profile Floor Jack, Rapid Pump Quick Lift
Feature
Minimum height 85mm(3.4 inches) lower profile, the max height is18.8 inches. meet more consumer needs.Large steel casters and swivel casters for easy maneuverability. Lightweight for easy mobility and transport.
All welded steel frame construction with rust resistant finish for longer tool life.
It is ideal for SUV, truck, jeep and a lot more other vehicles Designed to meet ANSI/ASME PALD 2014 standards.
TONDA brand is committed to the development and production of jacks and all other hydraulic tools. As a result, we offer you the best products always!
Description
Practical and Reliable.To those of you who don't know what a floor jack is, it is basically a hydraulically operated device, which is usually used for lifting cars, trucks or other heavy machinery. A floor jack comes in handy when there's some trouble with your cars and other vehicles. A floor jack might be more useful for schools and other organizations, where the usage of vehicles is more, but it proves to be beneficial for families and individuals as well. In order to buy correct products, please find out the chassis height of your own car before payment. TONDA Machinery Co.,Ltd. is committed to the development and production of jacks and other hydraulic tools. We mainly products bottle jack series, floor jack series, as well as shop cranes and other non-standard products, with annual sales more than 3.5 million units of various products, which support a good variety of industries, and our fixed assets is more than 50 million. The company has passed the ISO9001:2008 quality management system certification. The products have passed the EU GS/CE certification, meet the United States ANSI/ASME2009 standards, as well as Australia AS/NZS 2693:2007 standard.
TONDA Machinery has a long history and enjoys high reputation in the industry. Our production capacity and annual sales maintain a rapid growth each year. We always adhere to the concept of quality first and honesty first, no matter in the past or in the future,we take the responsibility as our own to create a world-class manufacturing enterprise, to make our products reach the international advanced standards in technology and manufacturing capabilities, to be the best jacks manufacturer, and to serve customers all over the world.
5. 1.5 Ton Compact Aluminum Racing Jack with Rapid Pump
Feature
Dual parallel pump systemLifts most vehicles to an appropriate work height in just 3-1/2 pumps!
Constructed for professional race teams
Precision-machined, high strength, aircraft aluminum billet
Two piece knurled aluminum handle
Description
Rapid Pump high performance aluminum racing jack has a dual parallel pump system to lift most vehicles to an appropriate work height in just 3-1/2 pumps! Lightweight, compact design takes up less space on your shop floor, easier to transport Constructed for professional race teams out of precision-machined, high strength, aircraft aluminum billet Universal joint release mechanism provides precision control of load descent in any handle position Two piece knurled aluminum handle for a sure grip, equipped with foam bumper to prevent damage to vehicle finish Minimum saddle height: 3-1/4" Maximum saddle height:14-3/4" Pumps (under max load) to max height: 5 Overall dimensions: 22-13/16" L x 9-7/16" W Shipping Weight: 30.30 lbs.6. Torin Big Red Aluminum Racing Floor Jack, 1.5 Ton (3,000 lb) Capacity
Feature
Lightweight racing jack weighs only 26.87 poundsSaddle height of only 3.35 inches helps when storing in small places
4 pumps and the jack fully extends up to 14.76 inches
Dual side grip handles provided for easy maneuvering
Lifting capacity of 3,000 pounds
Description
The Torin 1.5 Ton Aluminum Racing Jack has a lifting capacity rated at 3,000 pounds and a saddle height of only 3.35 inches, making it easy to store in small spaces. It comes equipped with a rubber pad to prevent marring, a saddle that rotates a full 360 degrees, and dual side grip handles to make maneuvering and positioning the jack a much easier task. The two-piece handle has a machined non-slip knurled area to keep your hands from slipping while lifting your vehicle. This jack has a lifting range of 3.35 inches to 14.6 inches.7. Sunex Tools Arcan ALJ2T Aluminum Floor Jack - 2 Ton Capacity
Feature
2-ton capacity while only weighing 50.4 poundsOnly 3-1/2 inch height required to get under low loads
Two-stage quick lift
Maximum lift height: 19-1/4 inches
Meets or exceeds ANSI/ASME and PALD standards
Description
This Arcan aluminum quick lift service jack features a low profile to get under low loads. Lift capacity is 2 tons. Minimum lift height is 3-1/2 inches and maximum lift height is 19-1/4 inches.8. 1.5 Ton 3000 Lb Aluminum Steel Racing Car Auto Floor Jack Low Profile Rapid Pump Lift
Feature
Lifting capacity of 3,000 lbsMinimum Height: 3-1/2"; Maximum Height: 14-1/8"
Constructed for professional race teams out of precision-machined, high strength, aircraft aluminum billet
Universal joint release provides precise load control in any handle position
Two piece knurled steel handle for a sure grip, equipped with foam bumper to prevent damage to vehicle finish
Description
Roadstar compact racing jack is constructed with durable, aircraft aluminum billet. A knurled steel handle ensures a steady grip while you quickly lift your load in just 3-1/2 pumps! The racing jack also features a universal joint release mechanism for smooth, precision lowering and a compact design for easy storage and transport.Features:
1. Dual parallel pump system.
2. Lifts most vehicles to an appropriate work height in just 3-1/2 pumps!
3. Constructed for professional race teams.
4. Precision-machined, high strength, aircraft aluminum billet.
5. Two piece knurled aluminum handle.
Specifications:
1. Color: Blue
2. Material: Aluminum
3. Maximum Lift Height (in.): 14-1/8 in.
4. Minimum height (in.): 3-1/2 in.
5. Lifting Capacity: 1.5 Ton
6. Dimensions:( 23.81 x 11.81 x 6.50)"/ (60.5 x 30 x 16.5)cm (L x W x H)
7. Weight: 16.25kg / 35.83lbs
Package Includes:
1 x 1.5 Ton Floor Jack
1 x Handle
1 x Manual
9. Arcan 3 Ton Professional Grade Aluminum And Steel Service Jack
10. SUNCOO Floor Jack Stands Ultra Low Profile Aluminum Steel with Rapid Pump Quick Lift 1.5 Ton
Feature
1.5 Ton Lifting Jack1.5T Rated Capacity, 37-3/8" Handle Length, 3.5"-18.1" Lift Height Range,ideal for SUVs and elevated chassisePractical Usage Service Jack Extra-low profile reaches under most show cars & Extra-wide steel casters for stability
Floor Jack with Quick RiseYour perfect assistant, quick pump exclusive dual parallel pump system lifts with far fewer pumps & Universal joint release provides precise load control in any handle position
Compact Design Aluminum steel construction featuring light weight and easy placement
Heavy Duty Steel Service JackDurability and longevity. Industrial quality Super-tough precision welded construction with an industrial grade finish
Description
The heavy duty 1.5 ton Professional jack designed for use at home or auto repair shop. It can Lifting Vehicles almost two feet off the ground. Extra-low profile for low ground capacity needs.Dual piston Rapid Pump technology lifts most work loads and easy to get job done.
Feature
- Aluminum Steel Construction,Light Weight
- Super-tough precision welded construction with an industrial grade finish
- Industrial quality for professional mechanics and hardcore automotive enthusiasts
- Quick pump exclusive dual parallel pump system lifts with far fewer pumps
- Compact size for easy placement
- Universal joint release provides precise load control in any handle position
- Extra-wide steel casters for stability
- Extra-low profile reaches under most show cars
- Fitment:Most type of Vehicles, Mini Van to Show Car
Specifications
- Material: Aluminum
- Handle Length (in.) 37-3/8 in.
- Maximum Lift Height (in.) 18.1
- Minimum height (in.) 3-1/2 in.
- Product Length 26.4 in.
- Product Width 11.9"
- Size(s) 1.5 Ton
