Finding your suitable pcie sata 3 is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best pcie sata 3 including detail information and customer reviews. Let’s find out which is your favorite one.
Best pcie sata 3
1. Sedna PCI Express (PCIe) SATA III (6G) SSD Adapter with 1 SATA III Port (with Built in Power Circuit, no Need SATA Power Connector, Best for Mac), SSD not Included
Feature
Direct mounting of 2.5" SATA III SSd / Hdd on boardOne extra SATA III port for other devices
Built in Power circuit, best for MAC where no power connector available
Operating System Software can be installed on mounted SSD and booting of the OS from the installed PCIE disk is supported ( Your mother board BIOS need to support this feature )
Maximum capacity supported : 2T
Description
Features :Direct mounting of 2.5" SATA III SSd / Hdd on board (SSD not included)
One extra SATA III port for other devices
Operating System Software can be installed on mounted SSD and booting of the OS from the installed PCIE disk is supported (Your mother board BIOS need to support this feature)
Using standard low cost high perfermance 2.5" SSD instead of the much more expansive mSATA SSD
Built in Power circuit, no power connection required. Best for MAC where no extra power connection available
Can be used for installion of VMWare ESXI 5.5 as boot disk (need to inject sata-xahci-1.10-1.x86_64.vib to ESXI installation ISO file)
Specifications :
PCIE 2 Port SATA III (6G) Port
1 Port support direct installation of standard 2.5" SATA III SSD
1 extra internal SATA III port for intallation of extra Hdd / SSD
PCI Express Specification Rev. 2.0
1-Lane (x1) PCI-Express with transfer rate 5Gb/s Full Duplex channel
Compliant with Serial ATA 3.0 Specification,Data transfer rate up to 6.0Gb/s
Backward compatible with SATA1.0/SATA2.0 specification
Maximum capacity supported : 2T
Support NCQ
Driver supported Windows98SE /ME/ 2000/XP/Server 2003/Vista/WIN7/Win8/Win 8.1/ Win 10, Mac OS
System Requirement :
Available PCIE 2.0 1X,2X,4X,8X or 16X slot on PC
Supported OS
Package Content :
PCIE SATA III SSD adapter
Driver CD
4 x Hdd mounting screw
(SSD in photo is not included)
2. OWC Accelsior S PCIe Adapter for 2.5" SATA III SSD Drives
Feature
PCIe to 2.5" 6Gb/s SATA SSD Host Adapter, directly mount any standard 2.5" driveStorage Expansion With a Speed Boost, Up to 550 MB/s sustained speeds
Install in any available PCIe x4 (or greater) slot-Use as a native, high-speed, boot drive or scratch-disk and boost capacity and performance
No drivers or software needed, easily upgrade your PC or legacy Mac Pro tower
3 Year OWC Limited Warranty
Description
OWC Accelsior S: Storage Expansion With a Speed Boost. Add a 2.5" SATA 6G Drive to your Mac or PC.Directly mount any standard 2.5" drive.Up to 550 MB/s sustained speeds. Enhance SATA 3Gb/s systems with SATA 6Gb/s support. Easy installation. No drivers required. Accelsior S is the simple solution to add a high speed SATA 6G drive to PCs or silver Mac Pro towers otherwise restricted to 3G architecture. Combined with a high-performance SSD, Accelsior S brings cutting edge 6G performance to your SATA 3G system. With more than 500 MB/s of throughput, the Accelsior S dual-lane PCIe 2.0 card delivers flexible storage expansion - with a speed boost - to your Mac or PC. Accelsior S is the perfect complement to OWC's Mercury family of high-performance SSD's, allowing up to an extra 1TB of fast storage expansion. Mount a 2.5" drive to the Accelsior S, install in any available PCIe x4 (or greater) slot, and you're up and running with expanded high-speed storage. Use as a native, high-speed, boot drive or scratch-disk and boost capacity and performance. With no drivers or extra software needed, upgrading your PC or legacy Mac Pro tower with Accelsior S is a breeze. OWC Part Number: OWCSSDACL6G.S - Form Factor: full height, half length - PCIe-SATA Bridge: ASM1062 - Interface: PCIe 2.0 x2 - AHCI Compliant: Yes, Plug and Play Installation, no drivers required - RoHS Compliant: YES -Performance: Read: up to 550MB/s, Write: 530MB/s - Operating Temp: 32F to 158F/0C to 70C - Non-Operating Temp: ?40F to 185F/?40C to 85C - Acoustics: 0.0 bels for both Idle and Seek - Operating system compatibility: Mac OS X 10.6 and up, Windows Server 2008 and higher, Not compatible as a Windows boot drive on a Mac - Supported Mechanisms: All 2.5" HDD and SSD SATA 1.5, 3.0, 6.0Gb/s.3. StarTech.com 4 Port PCI Express 2.0 SATA III 6Gbps RAID Controller Card with HyperDuo SSD Tiering - PCIe SATA 3 Controller Adapter
Feature
Add 4 Internal SATA III (6Gbps) Ports to a computer through a PCI Express x2 slotPCI Express 2.0 SATA Controller with HyperDuo SSD Tiering
4 Port PCI Express SATA III 6Gb
Maximize system capability with SATA III connection speeds
4 AHCI SATA III (6Gbps) ports through PCI Express x2
Description
Add Four Internal SATA III (6Gbps) Ports To A Computer Through A PCI Express x2 Slot
The PEXSAT34RH 4-Port PCI Express 2.0 SATA Controller Card with HyperDuo adds four AHCI SATA III ports to a computer through a PCIe slot (x2), delivering multiple internal 6Gbps connections for high-performance hard drives and Solid State Drives (SSDs). Featuring HyperDuo technology, the SATA card offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness and large capacity of standard hard drives. By combining SSD and HDD drives into a single volume (up to 3 SSD + 1 HDD), HyperDuo discreetly works in the background to identify and move frequently accessed files to the faster SSD drive(s) for improved data throughput up to 80% of SSD performance! Note: The HyperDuo automatic storage tiering feature is compatible with Windows XP, Vista, 7, and 8 only.
View larger
View larger
View larger
View larger
The PCIe SATA controller card supports Port Multiplier (PM), enabling multiple SATA drives to be connected to one port over a single cable, for a total of seven drives (up to four drives through PM on one port, and a single drive to the remaining three ports). Plus, the SATA controller card offers an effective hardware RAID solution, with native RAID (0, 1, 1+0) support.
Product Features & Applications
- Use SSD tiering to optimize your system for I/O intensive applications such as Office Suites, photo/video editing and media players
- Upgrade an older PCIe-based system to SATA 6Gbps capability, to better utilize faster SATA drives
- Add more internal SATA ports to a computer system, to connect additional storage drives and/or optical drives
- Provide optimized off-site back-ups/vaulting, through built-in RAID 1 capability
- Perfect for multi-drive internal RAID storage solutions
- Supports HyperDuo SSD auto-tiering
- Four AHCI SATA III (6Gbps) ports through PCI Express x2
- Fully compliant with SATA 3.0 specifications and backward compatible with SATA I/II (1.5/3.0Gbps) drives
- Supports hardware RAID 0, 1, and 1+0 modes configured through BIOS
- Compliant with PCI Express 2.0 standards
- Port Multiplier FIS-based and Command-based switching supported
- Natively supported single chipset design
- Simple HyperDuo configuration via card-BIOS level or intuitive GUI console (Windows only)
- Supports Native Command Queuing (NCQ) and ATA/ATAPI commands
- Includes Low Profile/Half-Height installation bracket
- Supports HDDs/SSDs/Optical/Blu-Ray drives
- LED headers for HDD activity LED indicators
4. IO Crest 4 Port SATA III PCI-e 2.0 x1 Controller Card Marvell Non-Raid with Low Profile Bracket SI-PEX40064
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Chipset: Marvell 88SE9215
Compliant with PCI-Express Specification v2.0 and backwards compatible with PCIex1
Compliant with Serial ATA Specification 3.0
Supports Communication Speeds of 6.0 Gbps, 3.0 Gbps, and 1.5 Gbps
Hot Plug and Hot Swap
4 Internal SATA 6Gb/s Ports
Compatible with SATA 6G, 3G and 1.5G Hard Drives
PCI-Express x1 Interface is Compatible with PCI-Express x2, x4, x8, and x16 slots
Description
PCIe x1 Interface Version 1.0, 4-Port Internal SATA 6Gbps Controller Card, Non-Raid, Marvell 88SE9215 Chipset, with Low Profile Bracket. IOCREST newest card with advance Marvell 88SE9215 Chipset single chip 4-port Gen III 6Gb/s host controller.5. Ableconn PEX-SAT4R 4-Port SATA 6G PCI Express 2.0 Host Adapter - PCIe AHCI SATA III 6Gbps RAID Controller Card Support HyperDuo SSD Tiering (Marvell 88SE9230 Chipset)
Feature
Supports SATA III transfer speeds up to 6.0 Gbps; backward compatible with SATA I/II at 1.5/3.0GbpsBuilt with Marvell 88SE9230. Supports Hardware RAID 0, 1, 10, and HybridDrive modes (powered by Marvell HyperDuo). Support on-the-fly AES 128/256-bit encryption
Support Port Multiplier FIS-based and Command-based switching
No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later.
High quality. Fully RoHS compliant. Made in Taiwan.
Description
Specification
* Connector:
- 4 x SATA (7 pin; DATA) Female
- PCI Express x2 Male
* Chipset: MARVELL 88SE9230
* Software:
- No driver installation is required on Windows 10/8/7/Vista, Server 2012/2008, Linux, Mac OS X 10.x and later. The AHCI drivers are natively built-in on most Operating Systems
- Drivers are available for Windows XP
- Provides Windows & Mac & Linux GUI and Windows BIOS to configure Hardware RAID 0, RAID 1, RAID 10, Hybrid Drive modes to drives these directly attached to this Host Adapter
* Data transfer rate:
- Up to 6 Gbps
* Number of Ports That Support Port Multiplier: 4 (can only use 1 PM at a time)
* Number of Drives Supported Through Port Multiplier: 1 to 4
* Supports up to 7 drives with 4 drives through PM
* 6 Gbps SATA III Internal 4 Ports PCIe Gen2 x2 lanes host adapter
* Hardware RAID controller to offload host CPU for max performance
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 10Gbps PCI Express 2.0 x2
* Fully compliant with Serial ATA specifications3.0 transfer rate of 6Gbps
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Supports one (1) Port Multiplier with FIS-based or Command-based switching. Maximum 4 of individual drives through Port Multiplier.
* Supports ATA and ATAPI commands
* Supports SATA Hot-plug, and Native Command Queuing (NCQ)
* Support on-the-fly AES 128/256-bit encryption
* LED Pin headers for LED activity indicators for each port
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
* BIOS on board supports Windows booting
* Fully RoHS compliant.
* Made in Taiwan
6. Ableconn PEX10-SAT 10 Port SATA 6G PCI Express Host Adapter Card - AHCI 6 Gbps SATA III Low Profile PCIe 2.0 Expansion Card
Feature
Adds 10 SATA 6G ports through a Low Profile PCIe 2.0 x2 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required. It is not positioned for performance storage such as multiple SSD drives.PCIe 2.0 x2 Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included. Compliant with PCI Express v2.0 and backward compatible with PCI Express 1.x
Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive. Support Native Command Queuing (NCQ), Hot plug and Hot swap SATA ports
No driver installation is required. The AHCI drivers are natively built-in on Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
Fully RoHS compliant. High quality product. Made in Taiwan.
Description
The Ableconn PEX10-SAT adds 10 SATA 6G ports through a Low Profile PCIe 2.0 card to your PC System. It's an ideal solution for surveillance users to install up to 10 SATA drives and/or ODD drives in one low profile PCIe card without driver installation required.
Specification
* Connector:
- 10 x SATA (7-pin, DATA) Female
* Chipset: ASMedia ASM1062 + 2x JMicron JMB575
* Data transfer rate:
- Up to 6 GBps
* Software:
- No driver installation required. The AHCI drivers are natively built-in on most Operating Systems
- Support Windows 10, 8, 7, Vista, 2008, 2012, Linux, Mac 10.x and later.
* 6Gbps SATA III Internal 10 Ports PCIe Gen2 2-lane Host Adapter
* Supports PCIe 1.0 and PCIe 2.0 motherboard
* Compliant with 10Gbps x2 PCI Express 2.0
* Fully compliant with Serial ATA specifications3.0
* Pin headers on board for activity indication on each channel
* Supports SATA III transfer rate of 6.0Gbps, 3.0Gbps, 1.5Gbps
* Supports ATA and ATAPI commands
* Supports SATA Hotplug, and Native Command Queuing (NCQ)
* Supports SATA I & SATA II & SATA III HDD, SSD, Optical Drive and Blu-Ray Drive
* Low Profile PCIe form factor card on a regular size bracket with an additional Low Profile bracket included
*Note: does NOT support SATA Port Multiplier
* BIOS on board supports Windows and Linux OS booting
* Fully RoHS compliant
* Made in Taiwan
Note: the product is not positioned for performance storage such as solid state drives. It's ideal for applications that need a lot of drives, or a huge capacity such as surveillance system, etc.
Package Contents
* Ableconn PEX10-SAT 10-Port SATA 6G PCIe Card
* 1x low profile PCIe bracket
7. N N.ORANIE PCIe 2.0 x 1 to SATA III 4 Ports Adapter Card Marvell Chipset Non-Raid for IPFS Mining and Adding SATA 3.0 Devices
Feature
PCIe X1 to 4 SATA 3.0 6Gbps interfaces; transfer speeds up to 6.0Gbps; backwards compatible with SATA 1.0/2.0 of 1.5/3.0Gbps.PCI-Express V2.0 also compatible with PCI-Express V1.0, can be used on PCIe X2 X4 X8 X16 slots.
Port Multiplier FIS-based and Command-based switching supported; Chipset: Marvell.
Support Native Command Queue (NCQ); Support IDE/AHCI 1.0 mode; Compatible with SATA 6G, 3G and 1.5G Hard Drives; Support Hot Plug and Hot Swap; Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i.
Support Windows XP/Server 2003/Vista/7/8/10(32/64 bit)/Linux
Description
PCIe X1 to 4 SATA 3.0 ports controller card offers a simple connection between a host computerand SATA 3.0 devices(SATA hard drive or SATA device), which allows 4 SATA devices at the speed
up to 6Gb/s.
Features
Serial SATA 3.0, compatible with SATA 2.0 and SATA 1.0
PCI-Express V2.0, compatible with PCI-Express V1.0
Support speed of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Compatible with SATA 6G, 3G and 1.5G Hard Drives
Support Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x, and Gen 3i
Support 4 SATA 3.0 6Gbps devices
Support IDE/AHCI 1.0 mode
Support Native Command Queue (NCQ)
Port Multiplier FIS-based and Command-based switching supported
Support Hot Plug and Hot Swap
PCI-Express X1, can be used on PCIe X2 X4 X8 X16 slots
Support Windows XP/Server 2003/Vista/7/8/10(32/64 bit)/Linux
Package includes:
1 X PCIe X1 to 4 SATA 3.0 ports controller card
1 X Drivers CD
8. Syba SD-PEX40104 PCI-Express 8-Port Internal SATA 6Gbps Dual Chipset PCI-E V2.0 x 1 Slot Controller Card
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
Connect up to 8 SATA III devices at a time and 8 internal SATA III Ports
DImensions of the product is 6 x 3 x 1 inches
Dual Marvell 88SE9215 + 88sm9705 chipset, software RAID capable
1 -Lane PCI-Express 2.0 interface, up to 6.0Gbps, low-profile bracket included
OS supported: Windows 7, 8, 10, Windows server 2008/R2, 2012/R2, Linux, Mac OSX
Description
The PCI-Express SATA host controller card expands your computer by eight SATA ports. You can connect devices such as SSD's, HDD's, DVD drives, etc. To the card. The orientation and position of SATA ports are well designed so that the cable wiring fits easily in the computer chassis.9. IO Crest 2-port SATA III PCIe 2.0 x2 Controller Card Green, SY-PEX40039
Feature
We recommend a fresh Windows install with this cardDrivers are required for this card to function.
ASM1061 Chipset (Asmedia 1061 SATA Host Controller)
Supports Hot Plug and Hot Swap
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps, 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier
Supports 2 Ports Serial ATA, Native Command Queue (NCQ), Port Multiplier
Works with SSDs
Supports Communication Speeds of 6.0Gbps, 3.0Gbps, and 1.5Gbps
Supports Port Multiplier
Description
The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer with SATA ports. Once installed this host card will add SATA ports with two independent channels. This allows support of two SATA devices at speeds of up to 6Gb/s whether it is a SATA hard drive or SATA device. The IO Crest 2 Port SATA III 6Gbps PCI-Express x1 Card is the easiest way to update any computer system.10. Vantec 4-Channel 6-Port SATA 6Gb/s PCIe RAID Host Card with HyperDuo Technology (UGT-ST644R)
Feature
4 Channel for Additional Devices. This Card will let You Grow as Your Needs Grow to Add more Devices to your System6 Flex Configurable Port for configuring as Internal SATA or External eSATA Port using simple setting on the Host Card
SATA III 6Gb/s on Every Channel for all your SSDs and HDD. This Offers the Maximum Performance for all your Drives
Port Multiplier Function For Multi-Bay Enclosures to Minimize multiple cable and Maximize Storage, Support both FIS and Command-based Switching
RAID 0, 1, 10 and HyperDuo Function for Redundancy to Keep your DATA Safe and at the same time Faster Disk Access
More lanes to Prevent bottleneck for All the SATA III drives Moving Data between the Drives and the System Board
Low Profile Bracket Included to Simplify Your Installation into Standard Desktop or SlimLine or Low Profile System
HyperDuo is a Technology Created by Marvell that Encompasses Both SSD and HDD Technologies to give You the Speed Without the Premium Price
Support Windows XP, Server 2003, Server 2008, Vista, 7, 8, 8.1, 10
