Finding your suitable annual cutter is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best annual cutter including detail information and customer reviews. Let’s find out which is your favorite one.
Best annual cutter
1. Evolution Power Tools A-CC6SET-1 CYCLONE Premium 1-Inch Annular Cutter Set with Pilot Pins-For Use With Magnetic Drills, 6-Piece
Feature
Free Pilot Pin Included3/4" Weldon shank with 2 flats - fits most standard magnetic drill presses
Made of M2AL High Speed Steel
Description
Evolution annular cutters save time and energy when compared to twist drills. By cutting only the periphery of the hole, annular cutters produce a reamed, finished, burr-free hole. No pre-step drilling is required; holes are cut in as little as 15 seconds. The CC6SET1 includes six 1-Inch cutters with diameters of 9/16-Inch, 5/8-Inch, 11/16-Inch, 13/16-Inch, 15/16-Inch, and 1-Inch all within a specially made carrying case.2. Evolution CC750 3/4-Inch Diameter x 1-Inch Depth of Cut Cyclone High Speed Steel Annular Cutter Size: 3/4-Inch Diameter x 1-Inch Depth Model: CC750 Tools & Home Improvement
Feature
3/4 Diameter x 1 Depth of CutM2AL High Speed Steel
3/4 Weldon shank with 2 flats - fits most standard magnetic drill presses
Includes free pilot pin
Guaranteed against breakage
Description
Evolution Cyclone Premium High Speed Steel Annular Cutters are designed to offer the highest value in annular cutter technology. Made with premium M2AL composite, Cyclone Cutters last longer, allowing more holes cut per dollar compared to standard annular cutting bits. The free included pilot pin saves the user time and money from having to find the correct accessory pin.3. Neiko 10249A Premium Annular Cutter, 1" Cutting Depth, M2 Cobalt HSS | 6-Piece Set | 9/16 to 1-1/16
Feature
Premium M2 cobalt high speed steel construction provides superior cutting performance, while our reformulated aluminum additive withstands high temperature for maximum durability1 inch cutting depth is ideal to create cylindrical, overlapping, and slotting holes on both ferrous and non-ferrous metals such as cast iron, stainless steel, aluminum, copper and more
Thin walled hollow design and dual alternating teeth geometry delivers more efficient and aggressive cutting edge than traditional hole saws and twist drill bits
3/4" Weldon style shank fits all major brands of magnetic drill presses
Set includes 6 common sizes of core drills and 1 centering pilot pin in a re-sealable storage case: 9/16, 5/8, 11/16, 13/16, 15/16, 1-1/16 in.
Description
The Neiko Tools premium annular cutter set can create cylindrical holes, of a depth up to 1 inch, on both ferrous and non-ferrous metals. Includes 6 sizes of core drills (9/16", 5/8", 11/16", 13/16", 15/16", 1-1/16") and a pilot pin with 1" cutting depth and a 3/4" weldon style shank that fits all major brands of magnetic drill presses. Set comes complete with its own compact storage case. These cutters are created with a thin walled hollow design with dual alternating teeth geometry, delivering more efficient and aggressive cutting than traditional hole saws and twist drill bits. Multiple precision cutting edges produce more accurate holes without burring. Premium M2 cobalt high speed steel construction provides superior cutting performance, while our reformulated aluminum additive withstands high temperature for maximum durability. These cutters are suitable for working with cast iron, stainless steel, aluminum, copper, and more.4. Steel Dragon Tools MD40 Magnetic Drill with 7pc 1" HSS Annual Cutter Kit
Feature
Suitable for drilling on any metal surface.Rack and pinion gear system for exact drilling depth.
Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A
Kit includes six (6) high speed steel annular cutters with 1-inch cut depth and one (1) pilot pin.
Bit sizes included: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1 in., and 1-1/16 in.
Description
Steel Dragon Tools MD40 Magnetic Drill with 7pc 1" HSS Annual Cutter Kit
This package includes the Steel Dragon Tools MD40 Magnetic Drill Press and the Steel Dragon Tools 7-piece, 1-inch cut depth high-speed steel annular cutter kit.
The Steel Dragon Tools MD40 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs. of max force and ensures the machine will not move during the drilling process.A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.
A full line of 1-inch and 2-inch HSS annular cutters by Steel Dragon Tools are available.
MD40 Specifications:
- Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A
- Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.
- Maximum Boring Diameter: 1-1/2 in. (40 mm)
- Maximum Boring Depth: 7-1/2 in.
- Tool Holder: 3/4-inch Weldon Shank
- Spindle Speed: 670 RPM
- Overall Weight: 30 lbs.
Annular Cutter Specifications:
- Kit includes six (6) high speed steel annular cutters and one (1) pilot pin.
- Bit sizes included: 9/16 in., 11/16 in., 13/16 in., 15/16 in., 1 in., and 1-1/16 in.
- Cutting Depth: 1 in.
- 3/4 in. Weldon Shank
- Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)
5. VEVOR MD40 Magnetic Drill with 7pc 1" HSS Annual Cutter Kit 670 RPM Spindle Speed Magnetic Drilling System
Feature
Magnetic drill press suitable for drilling on any metal surface,Rack and pinion gear system for exact drilling depthMax Magnetic Force: 2,700 lbs. (12,000 N),tool Holder: 3/4-inch weldon shank;1100W Rated input power, 12000N Max Traction, 550 R/Min No-load speed, 125MM Max travel
The MD40 Magnetic Drill Press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 inch (40 mm)
Kit includes six (6) high speed steel annular cutters with 1-inch cut depth and one (1) pilot pin;Core drill bit size: 15MM / 18MM / 21MM / 24MM / 26MM / 27MM
MD42 magnetic drilling system suitable for steel structure, shipbuilding, equipment manufacturing, equipment installation, bridge engineering, wind power generation, drilling rig, electric power construction, railway manufacturing and other fields
Description
MD40 Magnetic Drilling System 670 RPM Spindle Speed with 7PC 1" HSS Annular Cutter Kit
The MD40 magnetic drill press will accept up to 2-inch, high-speed steel annular cutters with a maximum boring diameter of 1-1/2 in. (40 mm). This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet. The electromagnet has 2,700 lbs of max force and ensures the machine will not move during the drilling process.
A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.
A full line of 1-inch and 2-inch HSS annular cutters by Steel Dragon Tools are available.
Annular Cutter Features:
SDT annular cutters will drill large holes up to ten times faster than regular drills bits.
Machine-finish hole with no reaming needed when using lubricant.
Make overlapping holes, slotting holes, and edge cuts.
Bit size is etched on each cutter.
Pilot pin helps locate center of hole location.
Pilot pin helps eject slug after drilling is complete.
During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Annular Cutter Specifications:
Kit includes six (6) high speed steel annular cutters and one (1) pilot pin
Bit sizes included: 9/16 in,11/16 in,13/16 in,15/16 in,1 in,and 1-1/16 in
Cutting Depth: 1 in
3/4 in. Weldon Shank
Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)
MD40 Specifications
Motor: High-Speed Series, Induction,1,100 W, 220 V,60 Hz,15 A
Max Magnetic Force: 2,700 lbs. (12,000 N)
Maximum Boring Diameter: 1-1/2 in. (40 mm)
Maximum Boring Depth: 7-1/2 in
Tool Holder: 3/4-inch Weldon Shank
Spindle Speed: 670 RPM
6. Milwaukee 49-59-4075 3/4" TCT Annual Cutter 2" D
Feature
Cannot be resharpenedFor Cutting Depths 1-3/8" Diameters (9/16 - 11/16") use pin 49-59-0015
For Cutting Depths 1-3/8" Diameters (13/16 - 1-1/16") use pin 49-59-0013
For Cutting Depths 2" Diameters (9/16 - 11/16") use pin 49-59-0016
For Cutting Depths 2" Diameters (3/4 - 2-1/4") use pin 49-59-0014
Description
Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer Life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in hard metal materials including Stainless Steel and Cast Iron. All Milwaukee Tungsten Carbide Tipped Annular Cutters have a 3/4" Weldon Shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.7. Annular Cutter Set Kit HSS 3/4" Weldon Shank 1-1/4" Cutting Depth 1/2''-1-1/16''Cutting Diameter Two-Flat for Magnetic Drill Press with Pilot Pin 6pcs by Proburs
Feature
The annular cutters are compatible with almost all major brands of magnetic drills, can also be used with machine tools such as mills and large drill presses with tool holders.Made of tough high speed steel material, with longer service life and high heat resistance.
Applicable materials include wood, various steel materials,steel plate, aluminum, brass, cast iron, Stainless steel of lower BHN.,etc.
The biggest advantage of HSS annular slugger drill cutter bits is its ability to re-sharpen and burr-free holes and smooth holes, resulting in less scrap and wastage of material,has higher accuracy and multiple cutting edges for ply-cutting and lower friction to reach better performance of endurance and removal of chips.
Includes 6 Cutters ( Cutting Diameter1/2, 9/16, 11/16, 13/16, 15/16 & 1-1/16"), 1 pilot pin & 1 plastic tool carrying case
Description
Specification:
Item:HSS standard weldon annular cutter set
Includes: 6 annular cutters; 1 pilot pin & 1 carrying case
Cutting Diameter: 1/2", 9/16", 11/16", 13/16", 15/16" &1-1/16"
Cutting Depth: 1-1/4''
Shank Diameter: 3/4"
Shank Style: Weldon Flat
Number of Flats: 2
Accessories: 1 pilot pin(6.34mmx77mm)
Material:High Speed SteelHSS
Finish/Coating: Bright
Fits: Core hole drilling fields such asengineering,rail transit, bridges, ships, machinery manufacturing, aerospace,mild& structural steel,aluminum,stainless steel (lower BHN)and cuts only agroove at the periphery of the hole and leaves a solid core or slug at the center.
Application:
1.Requirement to cutting rotate speed of annular cutter are also different fordifferent diameters,and reasonable cutting rotate speed will prolong servicelife of annular cutter directly,So we recommend:1.The cuttingspeed:VC=20-25m/min 2.The reasonable rotate feed amount shall befn=0.08-0.13mm/r 3.The reasonable feed rate shall be vf=36-60mm/min
2. "Weldon shank" annular cutters have 2 flats andfix in the chuck by tightening Grub screws in the two flat areas.
3. Insert the ejector pin inside the annular cutter,never use an annular cutter without an ejector pin.Fill the coolant tank with BDSlubricant,never use the machine without lubricant.
Tips:
1.Make sure the product is correct when youfirstly receive it,any problem please feel free to contact us.
2.Remember to protect yourself, especially eyeswhen working with it.
3.We also have 13pcs annular cutter set (ASIN:B07K2V1NQR)and single annular cutter, if you need, just search on our shop,many sizes can be chosen.
8. Milwaukee 49-59-4089 TCT Annual Cutter
Feature
Cannot be resharpenedFor Cutting Depths 1-3/8" Diameters (9/16 - 11/16") use pin 49-59-0015
For Cutting Depths 1-3/8" Diameters (13/16 - 1-1/16") use pin 49-59-0013
For Cutting Depths 2" Diameters (9/16 - 11/16") use pin 49-59-0016
For Cutting Depths 2" Diameters (3/4 - 2-1/4") use pin 49-59-0014
Description
Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer Life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in hard metal materials including Stainless Steel and Cast Iron. All Milwaukee Tungsten Carbide Tipped Annular Cutters have a 3/4" Weldon Shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.9. Milwaukee 49-59-3094 15/16" TCT Annual Cutter 1-3/8 D
Feature
Cannot be resharpenedFor Cutting Depths 1-3/8" Diameters (9/16 - 11/16") use pin 49-59-0015
For Cutting Depths 1-3/8" Diameters (13/16 - 1-1/16") use pin 49-59-0013
For Cutting Depths 2" Diameters (9/16 - 11/16") use pin 49-59-0016
For Cutting Depths 2" Diameters (3/4 - 2-1/4") use pin 49-59-0014
Description
Milwaukee Tungsten Carbide Tipped Annular Cutters offer an Advanced Tooth Geometry that Cuts, Cleans, and Clears while drilling, leading to Faster Holes and Longer Life. The cutters displace less material for the same size hole as the competition, giving you fast, burr-free holes in hard metal materials including Stainless Steel and Cast Iron. All Milwaukee Tungsten Carbide Tipped Annular Cutters have a 3/4" Weldon Shank for use with most small magnetic drill presses and large magnetic drill presses with the correct arbor.10. Milwaukee 49-59-3056 9/16" TCT Annual Cutters 1-3/8 D
Feature
Cannot be resharpened | For Cutting Depths 1-3/8" Diameters (9/16 - 11/16") use pin 49-59-0015For Cutting Depths 1-3/8" Diameters (13/16 - 1-1/16") use pin 49-59-0013
For Cutting Depths 2" Diameters (9/16 - 11/16") use pin 49-59-0016
For Cutting Depths 2" Diameters (3/4 - 2-1/4") use pin 49-59-0014
