Top bunsen burner with hose for 2019

If you looking for bunsen burner with hose then you are right place. We are searching for the best bunsen burner with hose on the market and analyze these products to provide you the best choice.

Best bunsen burner with hose

Product	Features	Editor's score	Go to site
	Liquid Propane Bunsen Burner, StabiliBase Anti-Tip Design with Handle, LP - Eisco Labs		Go to amazon.com
	Eisco Labs Neoprene Bunsen Burner Hose, 3 ft (.9m) - Tube ID 1/4", OD 7/16"		Go to amazon.com
	Liquid Propane Bunsen Burner, StabiliBase Anti-Tip Design with Handle, with Flame Stabilizer and Gas Adjustment, LP - Eisco Labs		Go to amazon.com
	Eisco Labs Neoprene Bunsen Burner Hose, 2 ft (.6m) - Tube ID 1/4", OD 7/16"		Go to amazon.com
	Natural Gas Bunsen Burner, StabiliBase Anti-Tip Design with Handle, with Flame Stabilizer and Gas Adjustment, NG - Eisco Labs		Go to amazon.com
	Lab Bunsen Burner with Air & Gas Adjustment, for Natural Gas & Propane		Go to amazon.com
	Gas One 2102 New Improved 6 ft Low Pressure Propane Regulator and Hose Connection Kit for LP/LPG Most LP/LPG Gas Grill, Heater and Fire Pit Table,Brown/A		Go to amazon.com
	Cloth Covered Connector Hose for Gas Burners: 4 feet of Tubing		Go to amazon.com
	Cloth Covered Connector Hose for Gas Burners: 2 Feet of Tubing		Go to amazon.com
	Cloth Covered Connector Hose for Gas Burners: 3 feet of Tubing		Go to amazon.com

Related posts:

1. Liquid Propane Bunsen Burner, StabiliBase Anti-Tip Design with Handle, LP - Eisco Labs

Feature

This basic bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner has one adjustment which is an air flow adjustment sleeve. The version of burner is designed to have the flame controlled via the valve at the gas output, not at the burner. This is a very basic simple easy to use burner jetted for liquid propane.
This burner is equipped with casted ribbed fuel input tube which is 8mm outside diameter - Recommended neoprene tube (not included) to connect burner to fuel source is Eisco Item number CH0100A 23.60" long (60cm length) or CH0100B 35.43" long (90cm length) each end of the tubes has a flexible end that can fit a variable diameter of 0.28" to 0.42" to accept a variety sizes on different burners.
This improved design has an extended cast Iron base (4.25" x 4.25") prevents easy tipping, even with hoses connected. Burner feet are spaced on all four corners to create extra stability and so burner fits comfortably under stands. Equipped with a sturdy "Candle stick holder" handle. This improved safety feature is casted in to the base to allow user to move burner without getting harmed.
Liquid Propane Burners have a BTU range usually 2000-3200. Maximum Temperature is approximately 1550 C (2822 F)
All burners are available for both liquid propane and natural gas.

Description

This basic bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner has one adjustment which is an air flow adjustment sleeve. The version of burner is designed to have the flame controlled via the valve at the gas output, not at the burner. This is a very basic simple easy to use burner jetted for liquid propane. Liquid Propane Burners have a BTU range usually 2,000-3,200. Maximum Temperature is approximately 1,550 C (2,822 F) There are a number of burners offered with different options. Basic Burner (CH0991NG & CH0991LP) Very basic easy to use burner, usually selected based on price. Academic Burner (CH0992NG & CH0992LP) Burner with Flame stabilizer; Most common basic academic burner with air flow control. Versatile Burner (CH0993NG & CH0993LP) Burner with Flame Stabilizer and gas adjustment. Bestselling and most used burner due to flexibility to control and gas and air flow to the flame. Micro Burner (CH0994NG & CH0994LP) compact space restrictions when space and height is a concern. Tirrill Burner (CH0995NG & CH0995LP) burners for specialized finely controlled air gas mixture. Meker Burner (CH0996NG & CH0996LP) for hotter flames. All burners are available for both liquid propane and natural gas.

2. Eisco Labs Neoprene Bunsen Burner Hose, 3 ft (.9m) - Tube ID 1/4", OD 7/16"

Feature

Connect your burner to a fuel source such as natrual gas or liquid propane
3 feet (.9m) in length
Both ends of the hose are designed to fit gas inlet diameters of roughly 8-10mm
Note: Due to the nature of neoprene, please inspect hose before every use to make sure there are no holes or cracks
Note: User should always have a gas regulator and gas control valve in place when using a Bunsen burner and this connecting hose

Description

This neoprene hose connects your Bunsen, Tirrill or any other type of burner to a fuel source such as liquid propane or natural gas. The hose is commonly used to connect basic, flame stabilizing, meker, tirrill, micro, and gas adjust Bunsen burners. The hose should always be used in a lab setting and never connected directly to a fuel source. There should always be a regulator and control gas valve connected to the hose, then the hose to the burner. (Burner in images not included).

3. Liquid Propane Bunsen Burner, StabiliBase Anti-Tip Design with Handle, with Flame Stabilizer and Gas Adjustment, LP - Eisco Labs

Feature

This is the most versatile bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with an air flow adjustment sleeve, brass thumb gas adjustment and brass flame stabilizer tip. This is a very simple easy to use burner jetted for liquid propane.
This burner is equipped with casted ribbed fuel input tube which is 8mm outside diameter - Recommended neoprene tube (not included) to connect burner to fuel source is Eisco Item number CH0100A 23.60" long (60cm length) or CH0100B 35.43" long (90cm length) each end of the tubes has a flexible end that can fit a variable diameter of 0.28" to 0.42" to accept a variety sizes on different burners.
This improved design has an extended cast Iron base (4.25" x 4.25") prevents easy tipping, even with hoses connected. Burner feet are spaced on all four corners to create extra stability and so burner fits comfortably under stands. Equipped with a sturdy "Candle stick holder" handle. This improved safety feature is casted in to the base to allow user to move burner without getting harmed.
Liquid propane burners have a BTU range usually 2,000-3,200. Maximum Temperature is approximately 1,550 C (2,822 F)
All burners are available for both liquid propane and natural gas.

Description

This is the most versatile bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with an air flow adjustment sleeve, brass thumb gas adjustment and brass flame stabilizer tip. This is a very simple easy to use burner jetted for liquid propane. Liquid propane burners have a BTU range usually 2,000-3,200. Maximum Temperature is approximately 1,550 C (2,822 F) There are a number of burners offered with different options. Basic Burner (CH0991NG & CH0991LP) Very basic easy to use burner, usually selected based on price. Academic Burner (CH0992NG & CH0992LP) Burner with Flame stabilizer; Most common basic academic burner with air flow control. Versatile Burner (CH0993NG & CH0993LP) Burner with Flame Stabilizer and gas adjustment. Bestselling and most used burner due to flexibility to control and gas and air flow to the flame. Micro Burner (CH0994NG & CH0994LP) compact space restrictions when space and height is a concern. Tirrill Burner (CH0995NG & CH0995LP) burners for specialized finely controlled air gas mixture. Meker Burner (CH0996NG & CH0996LP) for hotter flames. All burners are available for both liquid propane and natural gas.

4. Eisco Labs Neoprene Bunsen Burner Hose, 2 ft (.6m) - Tube ID 1/4", OD 7/16"

Feature

Connect your burner to a fuel source such as natrual gas or liquid propane
2 feet (.6m) in length
Both ends of the hose are designed to fit gas inlet diameters of roughly 8-10mm
Note: Due to the nature of neoprene, please inspect hose before every use to make sure there are no holes or cracks
Note: User should always have a gas regulator and gas control valve in place when using a Bunsen burner and this connecting hose

Description

This neoprene hose connects your Bunsen, Tirrill or any other type of burner to a fuel source such as liquid propane or natural gas. The hose is commonly used to connect basic, flame stabilizing, meker, tirrill, micro, and gas adjust Bunsen burners. The hose should always be used in a lab setting and never connected directly to a fuel source. There should always be a regulator and control gas valve connected to the hose, then the hose to the burner. (Burner in images not included).

5. Natural Gas Bunsen Burner, StabiliBase Anti-Tip Design with Handle, with Flame Stabilizer and Gas Adjustment, NG - Eisco Labs

Feature

This is the most versatile bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with an air flow adjustment sleeve, brass gas adjustment knob and brass flame stabilizer tip. This is a very simple easy to use burner jetted for natural gas.
This burner is equipped with casted ribbed fuel input tube which is 8mm outside diameter - Recommended neoprene tube (not included) to connect burner to fuel source is Eisco Item number CH0100A 23.60" long (60cm length) or CH0100B 35.43" long (90cm length) each end of the tubes has a flexible end that can fit a variable diameter of 0.28" to 0.42" to accept a variety sizes on different burners.
This improved design has an extended cast Iron base (4.25" x 4.25") prevents easy tipping, even with hoses connected. Burner feet are spaced on all four corners to create extra stability and so burner fits comfortably under stands. Equipped with a sturdy "Candle stick holder" handle. This improved safety feature is casted in to the base to allow user to move burner without getting harmed.
Natural Gas Burners have a BTU range usually 800-1200. Maximum Temperature is approximately 1500 C (2732 F)
All burners are available for both liquid propane and natural gas.

Description

This is the most versatile bunsen burner is used for safe continuous stream of flammable gas used for heating, sterilization and combustion. This burner is equipped with an air flow adjustment sleeve, brass gas adjustment and brass flame stabilizer tip. This is a very simple easy to use burner jetted for natural gas. Natural gas burners have a BTU range usually 800-1200. Maximum Temperature is approximately 1500 C (2732 F) There are a number of burners offered with different options. Basic Burner (CH0991NG & CH0991LP) Very basic easy to use burner, usually selected based on price. Academic Burner (CH0992NG & CH0992LP) Burner with Flame stabilizer; Most common basic academic burner with air flow control. Versatile Burner (CH0993NG & CH0993LP) Burner with Flame Stabilizer and gas adjustment. Bestselling and most used burner due to flexibility to control and gas and air flow to the flame. Micro Burner (CH0994NG & CH0994LP) compact space restrictions when space and height is a concern. Tirrill Burner (CH0995NG & CH0995LP) burners for specialized finely controlled air gas mixture. Meker Burner (CH0996NG & CH0996LP) for hotter flames. All burners are available for both liquid propane and natural gas.

6. Lab Bunsen Burner with Air & Gas Adjustment, for Natural Gas & Propane

Feature

Most commonly used lab Bunsen burner.
With gas regulator, air intake regulator, and flame stabilizer.
Can be used with natural gas and liquid propane.
Height: 6 1/4" (16 cm). Base diameter: 3" (7.8 cm). Weight: 6 oz.
To connect to the burner, please use a gas hose with inner diameter of 8-9 mm (5/16" or 3/8").

Description

Most commonly used lab Bunsen burner. With gas regulator, air intake regulator, and flame stabilizer. Can be used with natural gas and liquid propane. Flame temperature may reach as high as 1500 C (2700 F). Height: 6 1/4" (16 cm). Base diameter: 3" (7.8 cm). Weight: 6 oz. To connect to the burner, please use a gas hose with inner diameter of 8-9 mm (5/16" or 3/8"). Always turn off main switch on the fuel source when not in use. Gas regulator on the Bunsen burner is not designed as an off switch.

7. Gas One 2102 New Improved 6 ft Low Pressure Propane Regulator and Hose Connection Kit for LP/LPG Most LP/LPG Gas Grill, Heater and Fire Pit Table,Brown/A

Feature

Regulator and hose ready to use
Hose length: 150cm (59in)
Connecting outlet: 5/8" UNF
*Incompatible with BUNSEN BURNER*

Description

Regulator and hose ready to use
Hose length: 150cm (59in)
Connecting outlet: 5/8" UNF
*Incompatible with BUNSEN BURNER*

8. Cloth Covered Connector Hose for Gas Burners: 4 feet of Tubing

Feature

Cloth-Covered Flexible Rubber Tubing for Burners
With Two Heavy Rubber Connections
4 feet in length.

Description

A single, continous tube of flexible, electro-galvanized, rust-resistant steel that has been covered in a rubber sheath and then braided with high-strength green and black fabric. Two large, black rubber connectors are fixed on each end, allowing it to be connected from a gas outlet to a inlet. The rubber connectors can easily attack to a standard 3/8 outlet. Each one has passed the 50lb test, in which the connectors have supported a 50lb weight. This test assures a tight, leak proof fit at both ends. In addition to this, the tubing meets the standards of the AGA (American Gas Association).

9. Cloth Covered Connector Hose for Gas Burners: 2 Feet of Tubing

Feature

Cloth-Covered Flexible Rubber Tubing for Burners
With Two Heavy Rubber Connections
2 feet in length.

Description

Galvanized, flexible steel tubing with gas-proof rubber insulated covered with cotton braiding to meet the standards of the American Gas Association. Each length has heavy rubber connections on each end that firmly attach to fittings. The rubber connector ends easily attach to standard 3/8 nipples.

10. Cloth Covered Connector Hose for Gas Burners: 3 feet of Tubing

Feature

Cloth-Covered Flexible Rubber Tubing for Burners
With Two Heavy Rubber Connections
3 feet in length.

Description

Galvanized, flexible steel tubing with gas-proof rubber insulated covered with cotton braiding to meet the standards of the American Gas Association. Each length has heavy rubber connections on each end that firmly attach to fittings. The rubber connector ends easily attach to standard 3/8 nipples.

Conclusion

By our suggestions above, we hope that you can found the best bunsen burner with hose for you. Please don't forget to share your experience by comment in this post. Thank you!