If you looking for straight edge clamping tool guide then you are right place. We are searching for the best straight edge clamping tool guide on the market and analyze these products to provide you the best choice.
Best straight edge clamping tool guide
1. Kreg KMA2685 Rip-Cut Circular Saw Guide , Blue
Feature
Make rip cuts and crosscuts up to 24" wideCut multiple pieces to the same size with just one setup
Use the oversize edge guide for precise control throughout the cut
Eliminate need for marking, measuring, and layout lines
Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOLGreat projects start with high-quality cuts, and you can make those cutsmore easily than you ever imaginedusing your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you wantup to 24"using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you dont have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you're all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sledit accepts most left-blade or right-blade sawsand then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24") using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. Youll get straight, accurate, repeatable cuts easily every time.
2. E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
Feature
No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cutsExtra wide rail for exceptional rigidity and low profile for obstruction free cuts
Make joiner cuts on your table saw. The length of clamping area is "50.25 inches" between the jaws.
Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
Recessed tracks accept Contractor series Saw Plate, Router Plate and Stop Block but will not work with A, Twin or Ultra series accessories
Description
The Contractor C50 50in. All-In-One Clamp is a contractor-grade straight edge clamp used primarily as a guide for making straight cuts with circular saws and routers. It is both rigid and light, making it quick to position and lock in place. The aluminum frame is lightweight for ease of use but also designed for durability. The clamping components are of resilient Zytel nylon, which includes 9% glass content. The Contractor C50 straight edge clamp is one of the most valuable and useful tools in the workshop or work truck. Common Usage: Guide for making straight cuts w/circular saws and routers, Dimensions L x W x H (in.): 60 x 2 5/8 x 1 1/4, Includes: (1) Contractor clamp, Jaw Capacity (in.): 50, Material Type: Aluminum3. Bora WTX Clamp Edge 4 pc. set, 50 + 24 Clamps + 50 Extension + saw plate
Feature
Use with all circular saws, routers, jigsaws and other portable power tools.Clamping Strength (lbs)220Ridged Aluminum Straight Edge Guide for making straight and accurate cuts
Soft-grip non-marring rubberized clamping pad, securely grips all surfaces. Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 inches wide
Modular design allows additional aluminum extrusion sections to be added to expand the capacity up to 100-inch
Use the saw guide with your circular saw to cut with unmatched precision. Convenient - use for free hand cutting with the plate attached
Description
We've put a lot of thought into what makes a great Saw Plate, and the result is the Bora 542006 WTX. This Saw Plate (aka Saw Sled or Circular Saw Guide) is sturdy, easy to use, stable, and safe. With three different connecting points to your circular saw, it's rock solid, staying straight and true, and allows you to cut with precision and confidence (which is always important at several thousand RPM). The best part is its versatility. It can be used with our WTX Clamp Guides (and along with the Bora Rip Guide 542007), but if you already have another manufacturer's clamp guide / straight edge, the adjustable channel will ensure a perfect fit (up to 3 1/2 inches, in fact). You can also use it on any circular saw - right or left handed. This makes the WTX Saw Plate a must-have for DIY enthusiasts, woodworkers, carpenters, contractors, or anyone else who desires straight, true cuts on plywood or other sheet material. The Bora Clamp Edge tool guides features an aircraft grade extruded aluminum body for straight accurate cuts and rigid clamping. Each unit includes integrated hanging loop for convenient storage. Size denotes maximum clamping capacity. Expand you cutting capacity by 50 inches to cut a whole 8 ft. sheet of material when you attach the 50" Extension to either your 24" or 50" Clamp. Set includes 1 - 24-Inch clamp, 1 - 50-Inch clamp, 1 - 50-inch modular Extension and 1 - saw plate. Lifetime warranty.Questions? Please reach out to the manufacturer at [email protected]
4. Johnson Level & Tool J4900 98-Inch Aluminum Cutting Guide
Feature
98-inch cutting guide designed for durability and easy useUse with circular saws, routers for accurate cuts
Aluminum construction
Includes 2 49-inch rails, C-clamps
1-year limited warranty
Description
Huntington beach boardwalk sunset - double toggle switch is made of durable scratch resistant metal that will not fade, chip or peel. Featuring a high gloss finish, along with matching screws makes this cover the perfect finishing touch.5. 50 Clamp Edge Saw Guide Bora Portamate 543050 WTX Clamp Edge. Locking Handle Heavy Gauge Saw Guide for Straight, Precise Cuts
Feature
Rigid aluminum straight edge guide with 50-inch capacity for making straight and accurate cutsModular design allows additional aluminum extrusion sections to be added to expand the capacity up to 100-inch
Use with circular saws, routers, jigsaws and other portable power tools
Positive 2-3/16-in x 5/8-in clamping pads secure to all surfaces
3-In wide x 62-1/2" overall length
Description
The Bora Portamate WTX clamp edge saw guide is the perfect addition to your circular saw, router or jig saw allowing you to make straight cuts with ease. Made out of heavy gauge, extruded aluminum, the WTX clamp edge is tough and durable. The adjustable end clamp slides easily along the precise channels eliminating the need for the internal channel bar reducing weight and wear. The locking handle grabs work surfaces and won't let go giving you a secure edge that won't budge so you can make precise track saw like cuts with a circular saw, jig saw or router. The WTX clamp edge is 50 inch's long and with the connector accessories you can add an additional 50 inches of cutting capacity. The handle is molded with a hanging notch for convenient storage while it's not in use.6. DEWALT DWS5100 12-Inch Dual-Port Folding Rip Guide
Feature
12-inch Ripping Capacity on Left Side for common rips such as stair treads and risersUp to 14 1/2-inch Ripping Capacity on Right Side for maximum width rip cuts
Lightweight and durable aluminum construction for portability and strength
Folds down to 19-inch long by 3-inch wide for easy storage
Permanently laser-etched markings for accurate and fast setting;
Description
The DWS5100 12 in. Dual-Port Rip Guide has a 12 in. rip capacity on left side for common rips including stair treads and risers. Features up to 14-1/3 in. rip capacity on right side for maximum width rips. Lightweight and durable aluminum construction and ability to store compactly provide portability. Includes: 2 Installation Screws.7. Bora 543500 50" + 36" Clamps + 50" Extension + Saw Plate + Rip Handle WTX Clamping Straight Edge Saw Guide Set (5 Piece)
Feature
Use with all circular saws, routers, jigsaws and other portable power tools. Clamping Strength (lbs)220Ridged aluminum straight edge guide for making straight and accurate cuts
Soft-grip non-marring rubberized clamping pad, securely grips all surfaces
Modular design allows additional aluminum extrusion sections to be added to expand the capacity up to 100-inch
Use the saw guide with your circular saw to cut with unmatched precision. Convenient - use for free hand cutting with the plate attached
Description
We've put a lot of thought into what makes a great saw plate, and the result is the Bora 542006 WTX. This saw plate (aka saw Sled or Circular saw guide) is sturdy, easy to use, stable, and safe. With 3 different connecting points to your Circular saw, it's rock solid, staying straight and true and allows you to cut with precision and confidence (which is always important at several thousand RPM). the best part is its versatility. It can be used with our WTX clamp guides (and along with the Bora rip guide 542007), but if you already have another manufacturer's clamp guide/straight edge, the adjustable channel will ensure a perfect fit (up to 3-1/2 in. In fact). you can also use it on any Circular saw right or left handed. This makes the WTX saw plate a must-have for DIY enthusiasts, woodworkers, carpenters, contractors, or anyone else who desires straight, true cuts on plywood or other sheet material. The Bora clamp edge tool guides features an aircraft grade extruded aluminum body for straight accurate cuts and rigid clamping. Each unit includes integrated hanging loop for convenient storage. Size denotes maximum clamping capacity. Expand you cutting capacity by 50 in. To cut a whole 8 ft. Sheet of material when you attach the 50 in. Extension to either your 36 in. Or 50 in. Clamp. Set includes 1 - 36 in. Clamp, 1 - 50 in. Clamp, 1 - 50 in. Modular extension, a rip handle and a saw plate. Lifetime warranty.8. All in One Clamp T-36 36-Inch Double Grip Bench Clamp w/T-track
Feature
Twin Clamps are designed specifically for assembly projects but can also be used as a basic straight edge clampOne clamp faces down to hold your work table, the other clamp faces up to hold your project
Pairs of Twin Clamps simplify assemblies and hold work pieces for planing or sanding
Raised T-track accepts A, Twin, and Ultra series Saw Plate, Router Plate and Stop Block but will not work with Contractor series accessories
Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
Description
Perfect for getting through glue-up projects, the T Series clamp (the original double sided clamp) grips to your workbench and your workpiece. The precursor to our newer CT Series, it eliminates messy, complicated glue up builds. It is compatible with any A Series or U Series clamps, and A Series accessories (XSP, XRP, XSB, XWJ, XTJ).9. Yost Tools 436602 Yost 25" x 2" Cutting Guide
Feature
Extra wide rail for exceptional rigidity and low profile for obstruction free cutsNylon jaws hold work piece securely and are predrilled for accessory wide jaws and tall jaws
No more c-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts
Description
The Yost E25 25in. Edge clamp is a contractor-grade straight edge clamp used primarily as a guide for making straight cuts with circular saws and routers. It is both rigid and light, making it quick to position and lock in place. The aluminum frame is lightweight for ease of use but also designed for durability. The clamping components are of resilient Zytel nylon, which includes 9 percent glass content. The E25 straight edge clamp is one of the most valuable and useful tools in the workshop or work truck. Common usage: guide for making straight cuts W/circular saws and routers, dimensions L x W x H (in.): 30 x 2 5/8 x 1 1/4, includes: (1) contractor clamp, jaw capacity (in.): 25, material Type: aluminum10. WoodRiver Guide Rail 4' x 8' Kit
Feature
Two 56" Guide Rail components feature heavy-duty aluminum extrusionsGuide rail component has a 2-1/8" x 1/2" profile with integral 1/4" T-tracks
Guide rail connector locks together multiple guide rails to form a continuous guide
Clamps swivel about the "T" shaped anchor at any angle
Guide rail clamps secure the guide rail at each end