Shopping for the best high voltage probe and multimeter is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy high voltage probe and multimeter. Don’t worry any more! We spend many hours to review and compare high voltage probe and multimeter to make the short list for you. Let’s check which product is suitable with you.

Best high voltage probe and multimeter

Product Features Editor's score Go to site
Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600 Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
Go to amazon.com
Electrical Multimeter Test Leads Set with Alligator Clips Test Hook Test Probes Lead Professional Kit 1000V 10A CAT.II Electrical Multimeter Test Leads Set with Alligator Clips Test Hook Test Probes Lead Professional Kit 1000V 10A CAT.II
Go to amazon.com
B&K Precision PR 28A High Voltage DMM Probe, 40kV, X1000 Attenuation, 60Hz, 48 B&K Precision PR 28A High Voltage DMM Probe, 40kV, X1000 Attenuation, 60Hz, 48" Length
Go to amazon.com
Cal Test Electronics CT2700 High Voltage Digital Multimeter Probe, 40 kV / 28 kV Voltage Cal Test Electronics CT2700 High Voltage Digital Multimeter Probe, 40 kV / 28 kV Voltage
Go to amazon.com
B&K Precision HV44A High Voltage Probe Meter, 0 to +40KV DC B&K Precision HV44A High Voltage Probe Meter, 0 to +40KV DC
Go to amazon.com
GW Instek GHT-205 High Voltage Test Probe for GPT-9800 Series, GPT/GPI-700A Series, GPT/GPI-800 Series GW Instek GHT-205 High Voltage Test Probe for GPT-9800 Series, GPT/GPI-700A Series, GPT/GPI-800 Series
Go to amazon.com
Pintek High Voltage HVP40 probe 40KV DC 28KV AC 1000Mohm 1000:1 4 DMM Pintek High Voltage HVP40 probe 40KV DC 28KV AC 1000Mohm 1000:1 4 DMM
Go to amazon.com
2Pcs Multimeter Probes Test Probe, High Voltage Test Clips P5004 Insulated Test Probes Test Clips Flexible Test Hooks Probe, Quick Test Clip Probe 2Pcs Multimeter Probes Test Probe, High Voltage Test Clips P5004 Insulated Test Probes Test Clips Flexible Test Hooks Probe, Quick Test Clip Probe
Go to amazon.com
Tacklife DM01M Advanced Digital Multimeter Trms 6000 Counts Tester Non Contact Voltage Detection Amp Ohm Volt Multi Meter Temperature, Live Line, with Lcd Backlit, Black Tacklife DM01M Advanced Digital Multimeter Trms 6000 Counts Tester Non Contact Voltage Detection Amp Ohm Volt Multi Meter Temperature, Live Line, with Lcd Backlit, Black
Go to amazon.com
Electronic Multimeter Test Hook Clip Lead Kits - Hvd Heavy Duty Plunger Style Quick Flexible Test Probe CAT IV 600V 5A TKDMR (Test Hock) Electronic Multimeter Test Hook Clip Lead Kits - Hvd Heavy Duty Plunger Style Quick Flexible Test Probe CAT IV 600V 5A TKDMR (Test Hock)
Go to amazon.com
Related posts:

1. Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600

Feature

Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity tests
The clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity

Description

Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.

Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)

AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms

AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms

DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms

Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp

Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual

2. Electrical Multimeter Test Leads Set with Alligator Clips Test Hook Test Probes Lead Professional Kit 1000V 10A CAT.II

Feature

Even higher Copper Core requirementsContains 42 pure copper-core wires;Easily dealing with currents of 10A and preventing leakage issues from occurring.The nylon wire inside will make it withstand bending thousands of times without breaking or fraying.
More secure and durable silicone stringConstructed with flexible PVC/PA material that is double-layered and -insulated.The silicone used is non-toxic,environment friendly and meets both the UL and RoSH standards.Using high quality materials ensures that the test leads are durable,flexible as well as having properties like freeze resistance and heat tolerance.
Premium test tip and plugPure nickel plated copper test lead tips which does not easily break-off,has solid contact traits and speedy and stable measuring reaction times.And the kit will protect it against dust and oxidation.An efficient and stable connection is thus ensured.
Home & Industry ApplicationThanks to the CAT.II 1000V ratings 10A currents can safely be tested.Recommended for general measurements.2mm 10A alligator clips use with 20A meter probe.
Quality guaranteeMore than 10 years of experience in the production of multimeter accessories.

Description

Why would we recommend it to you?

You can easily test 10A currents and avoid leakage and other risks when doing so.Recommended for general measurements.

Within the wire is the nylon string that enhances its toughness and the resistance to bending 10,000 of time - thus greatly increasing the product's longevity.

Made with flexible double-layer PVC+PA silicone (outer red/black) and double insulation providing you double protection.

The needle tip is pure nickel plated copper and has good contact ability giving you a speedy and stable measuring reaction rate.


Specifications

  • Rated voltage : CAT.II 1000V
  • Rated current : 10A
  • Weight : 92g

3. B&K Precision PR 28A High Voltage DMM Probe, 40kV, X1000 Attenuation, 60Hz, 48" Length

Feature

40,000VDC or 20,000Vac Max input voltage
1000M ohms Input Impedance

Description

The BK Precision PR-28A is a High Voltage Digital Multimeter Probe. The BK Precision PRM-28A is capable of taking measurements at either 40k VDC or 20kVac Max input voltage with and attenuation of x1,000, making it an affordable addition to any electrician's toolset.

4. Cal Test Electronics CT2700 High Voltage Digital Multimeter Probe, 40 kV / 28 kV Voltage

Feature

Divider ratio: 1000:1
40kV/28kV AC peak
Accuracy +/-1 percent to 20kV DC
Meets IEC 61010-1 CATI
Input impedance: 1000

Description

The CT2700 high voltage DMM probe allows a standard digit multimeter to measure voltages up to 40 kV (DC + AC peak) or 28kVrms AC. With a divider ratio of 1000 to 1, a voltage of 1000 V will read 1 V on the meter. Output is through 4 mm sheathed banana plugs. Minimum meter input impedance is 10 Mohm. Accuracy +/-1 percent to 20 kV DC. Meets IEC 61010-1 CATI. Temperature coefficient: 200 ppm/degree C. Temperature: 0 to +50 degree C.

5. B&K Precision HV44A High Voltage Probe Meter, 0 to +40KV DC

Feature

Self-contained instrument
Measures high DC voltages up to plus 40KV
This probe is typically used to measure high voltages in TV sets, power supplies, laboratories and for general high voltage commercial applications
Measures 16-1/2" length by 2-1/8" width by 2" height with a 34" long ground cord
1 Year warranty

Description

This probe is a self-contained instrument; it measures positive polarity dc high voltages up to 40 kV. It consists of two interchangeable screw-in contact tips, a direct- reading meter, ground clip and high-impact ABS case This case has excellent insulating properties, light weight and is resistant to damage. One tip is a round needle type for general use, the other is a special flat spring type for easy access to a CRT anode. An alligator type clip lead provides a secure earth ground connection. A rugged, core magnet-type meter is supplied. It is reasonably free from the effects of outside magnetic fields and can with stand moderate shock and vibration without damage. The probe was factory calibrated at 25 kV. Under normal conditions, it should not require periodic calibration. This probe is typically used to measure high voltages in TV sets, power supplies, laboratories and tor general high voltage commercial applications. 1 year manufacturer warranty. Voltage range: 0 to 40KV DC. Input impedance: 600MO, nominal. Accuracy +/-3percent of full scale. Measures 16-1/2" length by 2-1/8" width by 2" height with a 34" long ground cord.

6. GW Instek GHT-205 High Voltage Test Probe for GPT-9800 Series, GPT/GPI-700A Series, GPT/GPI-800 Series

Feature

High voltage test lead
For GPT-9800, GPT/GPI-700A, GPT/GPI-800 series safety testers

Description

High voltage test lead for GPT-9800 Series, GPT/GPI-700A Series, GPT/GPI-800 series safety testers.

7. Pintek High Voltage HVP40 probe 40KV DC 28KV AC 1000Mohm 1000:1 4 DMM

Feature

MAX. Voltage : DC : 40KV, AC : 28KV, (50/60Hz only) CAT II.
1000M Input Impedance.
DC: 1% to 20KV. 2% to 40KV. AC: -5% to -10% (50/60Hz)
Division Ration : 1000:1 CE, TUV GS, UL, CUL, IEC1010

Description

Input impedance:1000M
Division Ratio:1000 : 1
MAX. Test Voltage
DC : 0 ~ 40KV
AC : 1 ~ 28KV ( 50 / 60 Hz )
Safety APPL.
EN61010 UL3111-1 TUV / GS
IEC 1010 CAT II Pollution 2
Polarity:Positive / Negative
Accuracy
DC : 1% to 20KV
2 % to 40KV
AC : - 5 % to - 10 % ( 1 ~ 28KV ; 50 / 60Hz )
Temperature Cofficient: 200ppm /
Maximum loading Current: 40A ( at 40KV DC )
Maximum loading power: 1.6 watt
Operating temperature:0 ~ + 50
Storage temperature:- 20 ~ + 70
Ground Lead length:90cm ( 3ft )
Output cable length:100cm ( 3.3ft )
For:DMM
Output Division:1V / 1KV
Dimensions:340mm x 80
Weight:about 300g
Remark:For 10M input impedance
DMM ( Accuracy < 0.5 % ) only

8. 2Pcs Multimeter Probes Test Probe, High Voltage Test Clips P5004 Insulated Test Probes Test Clips Flexible Test Hooks Probe, Quick Test Clip Probe

Feature

PREMIUM AUALITY MATERIAL ENSURES LONG TERM SERVICE AND NICE APPEARANCE--The main body is made of brass nickel and stainless steel springs, and the housing is made of PA, with long serving life
FLEXIBLE TEST PROBE OFFERS EASIER OPERATION--Press the test hook will extend out and the head is flexible and can be bent
HIGH SENSITIVITY AND RELIABILITY PROBES FOR INSTRUMENTS AND METERS--This flexible test probe can be used in instrument and meter,such as oscilloscope, and features high sensitivity and high reliability
FITS FOR 4MM BANANA PLUG--The side is a standard 4mm banana socket, easy to plug directly into the banana plug
PROFESSIONAL MULTI-METER QUICK TEST CLIP PROBES--This is 2 pcs professional full insulated quick test probes

Description

Features:
This is 2 pcs professional full insulated quick test probes. Press the test hook will extend out and the head is flexible and can be bent This flexible test probe can be used in instrument and meter,such as oscilloscope, and features high sensitivity and high reliability. The side is a standard 4mm banana socket, easy to plug directly into the banana plug The main body is made of brass nickel and stainless steel springs, and the housing is made of PA, with long serving life.

Specification:
Product model: P5004
Material: copper, PA
Surface Treatment: Nickel Plating
Current Voltage: CAT III 1000V and MAX.10A
Connection mode: Welding
Product color: red, black
Banana socket: 4mm/0.2in
Total length:15.2cm/6in
Weight: Approx.33g/1.2oz

Packing list:
1 x red Test Probe
1 x black Test Probe

9. Tacklife DM01M Advanced Digital Multimeter Trms 6000 Counts Tester Non Contact Voltage Detection Amp Ohm Volt Multi Meter Temperature, Live Line, with Lcd Backlit, Black

Feature

BETTER ACCURACY Measures DC Voltage to 1000V, AC Voltage to 750V, AC/DC Current to 10A, resistance to 60M, capacitance to 100mF, 6000 counts display, True RMS, 600V CAT IV, 1000V CAT III, It can satisfy your testing range as larger as possible
TEMPERATURE MEASURE & FLASHLIGHT - The max. measuring temperature for the K-type thermocouple dispatched at random is 482F and it instant measuring value can reach 572F. and with the flashlight to work in a dark place
NCV DETECTION & LIVE LINE TEST - If detecting the AC voltage, the indicators for signal density (high, medium and low) will be on in accordance with the detected density, while the beeper will sound at different frequencies to indicate
BEEP CONTINUITY TEST WITH LED - If the measured resistance is less than 40, the sensor green LED will be on and the beeper will sound continuously. If between 40 and 60, the sensor red LED will be on,Visual LED helps to judge circuit quickly
WHAT YOU GET - Tacklife DM01M Digital Multimeter , 1.5V AA Batteries, English User's Manual, Test Leads, K-Type Thermocouple, 24-Month Warranty

Description

Tacklife - Professional team on Amazon, which deals only with development of the tools.
We commit ourselves to using qualitative tools to improve the quality of life

Features
High Accuracy
True RMS, max 6000 counts with the milliamp-level sensitivity displays results swiftly and efficiently,and update speed 2-3 readings/sec.

Multifunctional
Measuring AC/DC voltage / current, resistance, continuity and diode, temperature,capacitance,
NCV test and live line test, when it comes to electronics, you need the right testing tools to make sure you're replacing the correct part

Extra Functions
Hold Mode, Flashlight, Back light, Auto power off, Over load protection,Short-circuit protection


Specification:
DC Voltage Range and Accuracy: 600mV/6V/60V/600V (0.5%+3), 1000V (0.5%+3)
AC Voltage Range and Accuracy: 6V/60V (0.8%+3), 600V/750V (1%+10)
DC Current Range and Accuracy: 60A/60mA/600mA (0.8%+3), 10.00A (1.2%+3)
AC Current Range and Accuracy: 60mA/600mA (1%+3), 10A (1.5%+3)
Resistance Range and Accuracy: 600/6K/60K/600K/6M (0.8%+3), 60M (1.2%+3)
Capacitance Range and Accuracy: 6nf/60nf/600nf/6uf/60uf/600uf/6MF (4.0%+3), 100MF (5.0%+3)
Temperature Range and Accuracy: -20-1000/-4-1832 (1.0%+3)
Display: 6000 counts


Note:
1.Do not use it in the vicinity of strong electromagnetic interference.
2.The maximum measuring temperature for the K-type thermocouple dispatched at random is 250, for higher temperature measurement (more than 250
please use high temperature K-type thermocouple.


Package Content:
1x Tacklife DM01M Digital Multimeter
4x 1.5V AA Batteries
1x English User's Manual
1x Test Leads
1x K-Type Thermocouple
1x 24-month Warranty

10. Electronic Multimeter Test Hook Clip Lead Kits - Hvd Heavy Duty Plunger Style Quick Flexible Test Probe CAT IV 600V 5A TKDMR (Test Hock)

Feature

TKDMR 2 Pcs professional full insulated quick test hocks.
Press the test hook will extend out and the head is flexible and can be bent.
This flexible test probe can be used in instrument and meter,such as oscilloscope, and features high sensitivity and high reliability.
The side is a standard 4mm banana socket, easy to plug directly into the banana plug.
The main body is made of brass nickel and stainless steel springs, and the housing is made of TPE&PA, with long serving life.

Description

Specification:

Product model: QTH01
Material: Copper, TPE,Stainless steel Intimate Spring
Surface Treatment: Nickel Plating
Current Voltage: CAT III 1000V/CAT IV 600V and MAX.5A
Connection mode: Cam Buckle and Welding
Product color: Red, Black
Banana socket: 4mm/0.2in
Total length:18.5cm/7.3in
Weight: Approx.90g/3.2oz

Packing list:

1 x Red Test Probe
1 x Black Test Probe

Brand: TKDMR

Conclusion

By our suggestions above, we hope that you can found the best high voltage probe and multimeter for you. Please don't forget to share your experience by comment in this post. Thank you!
Jill Rose