When you looking for ferrous metal saw blade 10, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable ferrous metal saw blade 10 is not an easy task. In this post, we show you how to find the right ferrous metal saw blade 10 along with our top-rated reviews. Please check out our suggestions to find the best ferrous metal saw blade 10 for you.
Best ferrous metal saw blade 10
1. Concord Blades MCB1000T080HP 10-Inch 80 Teeth TCT Ferrous Metal Cutting Blade
Feature
TCG Grind: Flat Chip GrindUltra sharp, hard titanium carbide
5/8" Arbor
Thin kerf allows a smooth finish w/ minimal waste. Lower hook angle improves the surface quality of the cut, increases the feed pressure required.
2.4 mm thin kerf design
Description
This industrial standard metal cutting carbide saw blade has construction grade titanium carbide teeth with a TCG grind. This allows for it to make easy cuts through metal rods, thin rebar, steel sheets, steel studs, steel pipes and channels. Lasts longer than abrasive discs when cutting most mild steels up to 1/8".- TCG grind
- 2.4mm kerf
- 0 degree hook angle
- 5/8" arbor
2. Concord Blades ACB1000T100HP 10-Inch 100 Teeth TCT Non-Ferrous Metal Saw Blade
Feature
TCG Grind: Triple Chip Grind allows for smooth cut on non ferrous and plastic itemsUltra sharp, hard titanium carbide
Ideal for cutting non ferrous metals such as Aluminum, Brass, copper, bronze and more as well as plastics, plexiglass, PVC, Acrylics & Fiberglass
Equipment use with Circular Saw, Miter Saw, Table Saw, Radial Arm Saw, etc.
3.2 mm kerf design, TCG Grind & -5Degree hook
Description
This industrial standard aluminum cutting carbide saw blade has construction grade titanium carbide teeth that allow you to easily cut through aluminum and non-ferrous metals such as copper, brass, bronze, etc. Can be used to cut other difficult materials such as plastic, PVC tubing and fiberglass. The negative hook angle, triple-chip grind and thick plate combine to produce a superior finish.- TCG grind
- 3.2mm kerf
- -5 degree hook angle
- 5/8" arbor
3. Oshlun SBNF-100100 10-Inch 100 Tooth TCG Saw Blade with 5/8-Inch Arbor for Aluminum and Non Ferrous Metals
Feature
Professional grade C-1 carbideNegative hook angle
Triple chip tooth grind
Precision ground carbide tips
Copper plugged expansion slots
Description
Our non ferrous metal blades have been designed with precision ground micro grain tungsten carbide tips and a triple chip tooth configuration. The specially formulated carbide lasts longer and leaves clean, burr free cuts in all types of non ferrous metals such as aluminum, copper, brass, bronze and even some plastics. Features copper plugged expansion slots for reduced noise and vibration. WARNING: Never attempt to cut ferrous metals with these blades. It is recommended that you use a coolant when cutting non ferrous metals. Proper clamping devices should be employed.4. Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor
Feature
10" Blade Diameter, 80 Teeth, TCG Grind, 5/8" Arbor, .091" Kerf, -5 Hook AnglePremium TiCoTM HI-Density Carbide Non-Ferrous Blend for Maximum Performance
Freud-Made TiCoTM Carbide specifically designed to cut nonferrous metals extends tooth life
Thin Kerf allows for faster feed rate and reduced waste
Silver Ice Coating resists corrosion and pitch build-up
Description
This thin kerf heavy-duty, non-ferrous metal cutting blade produces an excellent finish. These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.5. Oshlun SBF-100052 10-Inch 52 Tooth TCG Saw Blade with 1-Inch Arbor (5/8-Inch Bushing) for Mild Steel and Ferrous Metals
Feature
Fits: Evolution Rage3 and miter sawsMax RPM: 5,200
Triple chip tooth grind
Professional grade C-6 carbide
Laser cut expansion slots
Description
Our ferrous metal blades have been designed with a durable carbide grade and triple chip tooth grind which ensures an extended cutting life of all types of ferrous metals (mild steel) such as steel studs, angle iron, pipe, rebar, channel, flat stock and more. They can also be used for cutting non ferrous metals such as aluminum, copper and brass. The specially formulated C-6 micro grain carbide with titanium lasts longer and leaves a burr free cut with little to no sparks or dust, which are common when using abrasives. They can cut 5 to 10 times faster and last up to 30 times longer than abrasives, allowing fewer blade changes and increased production. The higher tooth count blades are better suited for thinner materials, while the lower tooth count blades are better for thicker materials. WARNING: Not recommended for cutting hardened materials. Never use on saws that run above the rated Max RPM. Proper clamping devices should be employed.6. Diablo D1080N Non-Ferrous Metal & Plastic Cutting Saw Blade
Feature
Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warpLaser cut heat expansion slots allow blade to expand due to heat build-up keeping the cut true and straight
Durable micrograin titanium carbide for extreme durability, razor-sharp cuts, and long life
Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
Laser cut arbor for accurate blade rotation reducing vibration and premature wear
Description
Diablo's next generation 10 in. X 80 tooth non-ferrous/plastics carbide Circular saw blade features new laser-cut Stabilizer vents for precise and clean cuts in non-ferrous metals and plastic materials. The advanced Stabilizer vents feature a permanent filler baked in from top to bottom for absorbing noise and preventing sideways movement, allowing the blade to slice through materials cleanly, quickly and accurately. Constructed with TiCo Hi-Density special-blend carbide, Diablo's 10 in. Non-ferrous metals/plastics blade produces precise cuts and provides 5x longer cutting life. The laser cut heat expansion slots allow the blade to expand and contract during use, keeping the cut true and straight. This blade is excellent for cutting plastics, brass, aluminum, copper and fiberglass.7. Freud D1050CF Diablo Steel Demon Cement II Carbide Metal Cutting Blade, 10"
Feature
Cement carbide teeth offer higher heat resistance and superior hardnessLonger life than standard metal cutting blades
Cuts ferrous metals including stainless steel, steel studs, angle iron, flat bar, channel, EMT Conduit and threaded rod
Description
Cement carbide teeth offer higher heat resistance and superior hardness; Longer life than standard metal cutting blades; Cuts ferrous metals including stainless steel, steel studs, angle iron, flat bar, channel, emt conduit and threaded rod; Triple chip tooth design extends the life of the blade.8. HICO 10" 80-Tooth TCG Metal Saw Blade with 5/8-Inch Arbor for Aluminum and Non Ferrous Metals
Feature
Ideal for cutting non ferrous metals such as Aluminum, Brass, copper, bronze and more as well as plastics, plexiglass, PVC, Acrylics & Fiberglass by using a table saw, miter saw or circular saw10-Inch 80T ultra fine finish cut-off blade with a laser-cut 5/8-inch arbor
Hi-Density Carbide with Titanium for long life and a flawless finish
Laser cut stabilizer vents trap noise and vibration keeping it cool and reducing blade warp
Description
HICO CBM1080 10-Inch 80-Tooth TCG Metal Saw Blade with 5/8-Inch Arbor for Aluminum and Non Ferrous Metals About HICO HICO was originally founded in 2000, and specialize in designing and manufacturing high quality tools in the industry. The company owns a unique range of products for woodworking, which include the power tools, lawn & garden tools, universal workbench, and also a full series of spare parts at the professional level, After over 14 years?? operation under the sophisticated management, HICO has not only achieved the leading level in the industry, also gained its reputation of high creativity and reliability. Today, the HICO products have been supplied to numerous customers worldwide, and all well-received by each consumer. Specification - Diameter: 10" - Machine Use: Miter Saw, Table Saw, Circular Saw - Application: Non Ferrous Metals, Aluminum - Teeth: 80-Tooth TCG - Arbor: 5/8" * Since a special discount will be offered to you for bulk purchasing with Amazon business account according to Amazon policy, we highly suggest you to contact Amazon to register a business account9. IRWIN Tools Metal-Cutting Circular Saw Blade, 10-inch, 80T (4935561)
Feature
Laser-cut blades and anti-vibration vents keep the blade cool for smooth and accurate cuts.Metal cutting-grade carbide teeth withstand impact, reduce wear, and deliver longer blade life.
Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch.
The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower.
Description
Laser-cut blades and anti-vibration vents keep the blade cool for smooth and accurate cuts. Metal cutting-grade carbide teeth withstand impact, reduce wear, and deliver longer blade life. Cuts the metal instead of grinding it like abrasive wheels, so the finished product is smoother and cooler to the touch. The metal cutting blades also last significantly longer than abrasive wheels making the cost per cut lower. IRWIN Tools Metal-Cutting Circular Saw Blade, 10-inch, 80T (4935561)10. MASTEC 10-Inch 100T Carbide Tooth TCG for Aluminum Saw Blade with 5/8-Inch Arbor
Feature
Specification:10-inch 100 Carbide Teeth 5/8-inch arborApplication:Durable smooth cutting and clean cutting.
TCG Tooth:Triple Chip Teeth blade ideal for cutting Aluminum,Plexiglass,Plastic,Non-ferrous Metals.
Machine use:Widely used in Miter Saws,Circular Saws,Table Saws.
Good Service:Please contact us if you have any questions about this saw blade.We guarantee the 100% replacement.Any problems will be solved within 24 hours.
Description
Product Description-Diameter: 10"
-Teeth: 100 TCG (Triple Chip Tooth)
-Arbor: 5/8"
-Applicable Machine: Miter Saws,Circular Saws,Table Saws
-Application: Widely used for cutting aluminum
-Working State:Aluminum wooking
Safety Instruction
-Always check the machine to be used is in good shape,well aligned so the blade won't oscillate.
- Always wear proper safety equipment:safety footwear,snug fitting clothing,safety goggles,hearing and head protection and proper respiratory equipment.
-Make sure the blade is correctly locked according to the machine's specifications before cutting.
