When you looking for 30 series torque converter kit, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable 30 series torque converter kit is not an easy task. In this post, we show you how to find the right 30 series torque converter kit along with our top-rated reviews. Please check out our suggestions to find the best 30 series torque converter kit for you.
Best 30 series torque converter kit
1. Bullet Lines Torque Converter Go Kart Clutch, Replaces Comet TAV2 3/4 Inch 30-75, Manco, 10t 40 or 41 Chain, Small Engine Belt Drive, 3/4 218353A, (0.75" 10T 40/41)
Feature
Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winchesComet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
Go Kart Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A, and 203814A 30-75 . Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
Comet 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors.
Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware, and instructions.
Description
Bullet Lines .75" torque converter replaces Comet TAV2 30 - 75 Torq-A-Verter models 218354A, 218355A TAV2 30-75. It is also is a replacement for Yerf Dog, Manco, Carter Brothers, Cushman Scooters, and more go cartsBullet Lines 3/4" go kart clutch is an asymetrical inline small engine clutch that replaces Comet TAV2 30 - 75 Torq A Verters. This clutch will help you get more power of your small engine by reducing engine load with nearly a 10 - 1 overdirve. A torque converter acts similar to a transmission, allowing higher speeds of your small engine, and smoother acceleration.Small engine Torque Converter clutches are heavily used in riding lawnmowers, small tractors, go karts, mini bikes, and waterski winches.
This torque converter fits a 0.75" shaft and comes with your choice of a 10 tooth sprocket for a 40/41 chain or a 12 tooth sprocket for a 35 chain. It will work with small engines producing 2 HP - 7 HP
Model 1: 1" Bore, 35 Chain, 12 Tooth
Model 2: 1" Bore, 40/41 Chain, 10 Tooth
Engine compatability: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.
Specifications:
The Torque Converter assembly includes:
All respective trademarks and registered trademarks appearing on this description belong to their respective owners
2. CNCShop Torque Converter Comet Clutch Go Kart Clutch 0.75Inch Replaces Comet TAV2 218353A Manco 10T 40 or 41 Chain Drive Belt (3/4" 10T 40/41 Chain)
Feature
Aluminum back plate 10T sprocket for 41/40 chain, Drive clutch bore: 3/4"(19mm).We do not authorize OMB Warehouse to sell our products, If you have any problems, please leave OMB Warehouse A2Z and FEEDBACK .
30 Series Asymmetrical Belt
A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
This clutch will help you get more power out of your small engine by reducing engine load.
Description
This is an asymmetric torque converter. It is a replica of a Comet TAV2. This item will fit a 3/4" shaft engine and has both sprockets for both #35 and #41 chain. Comes with METRIC hardware ONLY. For most domestic engines and the newer Predator engines, SAE hardware will be required. Use kit K_OMBTAVUSABOLTS Please verify the correct hardware for your engine. This torque converter is an asymmetrical inline small engine clutch that will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration. Engagement range is approximately 2350 RPM. Our torque converter fits a 3/4" shaft and comes with a 12 tooth sprocket for a #35 chain and a 10 tooth sprocket for #41 chain. It will work with small engines producing 5.5 HP - 9 HP. It is compatible on most small engines with horizontal shaft. Briggs/Robin/Tecumseh/Honda (and clones)... Kit may need to be altered to work with some 9HP & GX270 engines, Kohler/Clinton/Lifan. This unit replaces: Comet 218352A and 218353A Torq-A-Verter Specifications: Driven unit: Diameter 6" Drive clutch bore: 3/4" Belt: Asymmetrical type Top width: 19mm(3/4") Sprocket teeth: 12 teeth (35 Chain) and 10 teeth (40/41/420 Chain) Engagement range: 2350 RPM Recommended engine: 5.5HP - 9HP engine, 3/4" shaft with flat key Assembly Includes: Driver Unit: 1 set Driven Unit: 1 set V-Belt: 1 pc Driven Shaft & Gear: 1 set Side Retainer Plate: 1 pc Torque Converter Cover: 1 pc Metric mounting hardware Most common engines that this unit fits are: Predator 212cc Honda GX200 and GX160 196cc Clone Engines3. 30 Series Go Kart Torque Converter Clutch Driver Pulley Replacement Comet Manco 3/4" Bore Max Torque
Feature
Made of high quality iron material,which is lightweight, portable, sturdy, durable, maximum torque, wear-resisting and fast heat dissipation3/4" bore designed for 6.5hp 212CC engines
Work with: 10 Tooth Sprocket for #40/41/420 Chain,12 Tooth Sprocket for #35 Chain(Tooth and Chain aren't included)
Replacement for Go Karts 30 series Engine Comet Manco
Package included:1 x Torque Converter Clutch
Description
Introductions:Do you want to buy a new clutch?Or your old clutch is broken or malfunctioned, you should change it with a new one without any delays. Otherwise, it would endanger yourself, your friends or families. Under this circumstance, you should buy a clutch and this Go Kart Clutch would be a great choice. Made of high quality material, this clutch is reliable and durable in use. With fine workmanship, this clutch can function well exactly as same as the original one. Reasonable in price and quality, take action as soon as possible!
Features:
1. It will be your best choice
2. It is produced by the sophisticated technology
3. It is the combination of elegance and good use, firmly and securely, guaranteeing the safety of your car
4. Made of high quality material, durable in use
5. Designed of lightweight and portable, it is easy to use
6. Brand new and high quality
Specifications:
1. Material: Iron
2. Package Dimensions: (15.35 x 4.72 x 4.72)" / (39 x 12 x 12)cm (L x W x H)
3. Weight: 5.07 lbs / 2.3 kg
4. Centrifugal Clutch: 3/4" Bore
5. Fitment: Go Karts 30 Series
Package Includes:
1 x Clutch
4. Jeremywell Torque Converter Go Kart Clutch kit 30 Series 3/4 inch 12T #35 Chain
Feature
Jeremywell Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, water ski winches and much more.Jeremywell Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end
Jeremywell Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A and 203814A 30-75. Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
Jeremywell 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 12 teeth #35 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jack shaft with sprocket, and all mounting hardware.
Description
Jeremywell Torque Converter Go Kart Clutch kit 30 Series 3/4 inch 12T #35 Chain-Jeremywell Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, water ski winches and much more.
-Jeremywell Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end
-Jeremywell Torque Converter Kit is a direct replacement and fits all models of Comet TAV2 Torq-A-Verters 218353A, 219552A, 219456A, 217610A and 203814A 30-75. Vehicles currently using a centrifugal clutch can easily upgrade to a bolt on TC2 torque converter saving money from burned up CC units
-Jeremywell 30 Series Torque Converter kit bolts on to most engines with a horizontal shaft including: Briggs, Clinton, Honda and clones, Kohler, Lifan, Robin, and Tecumseh motors
-Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 12 teeth #35 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jack shaft with sprocket, and all mounting hardware.
5. Torque Converter Go Kart Clutch Replacement Kit For Manco Comet TAV2 3/4" 10T #40/41 and 12T #35 Chain
Feature
30 series go kart torque converter clutch kit fit all engines with a 3/4 inch straight crankshaftReplace Manco Comet TAV2;Recommended engine: within 8.0 HP 212CC engines, 3/4"shaft with flat key
Sprocket teeth: 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41 Chain(Chain included)
Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
It can reduce engine load and make your small engine more power,even offer higher speed and smoother acceleration for your engine
Description
Our go kart torque converter clutch is a direct replacement kit for the most popular Comet TAV2 go-kart 30 series.This kit comes with jackshaft sprockets for the 12T #35 and 10T #40 #41 #420 chain.It is made of high quality iron and aluminum, which is sturdy and durable.With this clutch,it can help you get more power out of your small engine by reducing engine load and allows higher speeds out of your small engine,smoother acceleration.Specifications:
1. Material: Iron & Aluminum
2. Package Dimensions: (13.78 x 13.78 x 7.48)" / (35 x 35 x 19)cm (L x W x H)
3. Weight: 11.24 lbs / 5.1 kg
4. Fits: All engines with a 3/4 inch straight crankshaft
5. Sprocket teeth: 1 x 12 Tooth Sprocket for #35 Chain, 1 x 10 Tooth Sprocket for #40/41 Chain
6. Fitment: Go Karts 30 Series
7. Replacement:Comet,Manco and more
Package Includes:
1 x Go Kart Torque Converter Kit
6. Rebuild Kit for 30 Series Torque Converter Driven Pulley
Feature
Green Torsion Spring6 Cam bumpers
Description
Rebuild kit for the 30 series Comet and aftermarket driven pulleys. These are OEM Comet parts.7. SUNROAD 30 Series 6.5 HP Go Kart Torque Converter Clutch Kit Replaces for Manco Comet 1" 10T #40/41/420 Chain
Feature
30 series go kart torque converter clutch kit fit all engines with a 1 inch straight crankshaftReplace Comet Manco;Recommended engine: 6.5 HP 212CC engines, 1"shaft with flat key
Sprocket teeth: 1 x 10 Tooth Sprocket for #40/41 Chain(Chain not included)
Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation
It can reduce engine load and make your small engine more power,even offer higher speed and smoother acceleration for your engine
Description
Our go kart torque converter clutch is a direct replacement kit for the most popular Comet Manco go-kart 30 series.This kit comes with jackshaft sprockets for the 10T #40 #41 chain.It is made of high quality iron and aluminum, which is sturdy and durable. With this clutch,it can help you get more power out of your small engine by reducing engine load and allows higher speeds out of your small engine,smoother acceleration.Specifications:
1. Material: Iron & Aluminum
2. Package Dimensions: (13.78 x 13.78 x 7.48)" / (35 x 35 x 19)cm (L x W x H)
3. Weight: 11.24 lbs / 5.1 kg
4. Fits: All engines with a 1 inch straight crankshaft
5. Sprocket teeth: 1 x 10 Tooth Sprocket for #40/41 Chain (Chain not included)
6. Fitment: Go Karts 30 Series
7. Replacement:Comet,Manco and more
8. Features:Durable,Maximum torque,Wear-resisting,Fast heat dissipation
Package Includes:
1 x Drive belt
1 x 1" Driver pulley
1 x Plastic Assy Cover
1 x Full Mounting hardware Kit
1 x 10 Tooth Sprocket for #40/41 Chain (Chain not included)
1 x Aluminum Mounting Bracket Plate
1 x 5/8" bore driven pulley 6" diameter
8. Torque Converter Go Kart Clutch Set 3/4" 10T 40/41 and 12T 35 Chain for Manco Comet TAV2 (30 Series)
Feature
Driver clutch bore: 3/4"(19mm),Driven unit: Overall Diameter 6" (5/8" driven pulley) ,Sprocket teeth: 10 teeth #40/41 chain. This is a complete kit that includes both drive and driven clutch pulleys, belt, aluminum engine mount plate, built in jackshaft with sprocket, all mounting hardware.Made of high quality iron and aluminum material, which is sturdy, durable, maximum torque, wear-resisting and fast heat dissipation 30-75
Unit replaces:Comet 218353A, 219552A, 219456A, 217610A, and 203814A TAV2 30-75
Comet Torque Converter 30 Series small engine belt drive pulley clutch kit will help with more take off power, smoother acceleration, climbing ability, and top end speed by providing more torque in the low end and higher speeds in top end.
Comet Torque Converter kits are used in small vehicles, riding lawnmowers, small tractors, go karts, mini bikes, mini choppers, ATV, motorcycles, and waterski winches
Description
Engine compatability: Bullet Lines Torque Converter is compatible on most engine with horizontal shaft.Specifications:
Material: Iron & Aluminum
Drive clutch bore: 3/4"(19mm)
Driven unit: Diameter 6" (5/8" driven pulley)
Sprocket teeth: 10 tooth #40/41chain and 12 tooth #35 chain
Engagement range: 2350200 RPM
Recommended engine: 2HP-7HP
Belt: Asymmetrical type
Fits: All engines with a 3/4 inch straight crankshaft
The Torque Converter assembly includes:
1 x Plastic Assy Cover
1 x Aluminum Mounting Bracket Plate
1x 10 Tooth Sprocket for #40/41 chain & 1x 12 Tooth Sprocket for #35
1 x 5/8" bore driven pulley 6" diameter
1 x 3/4" Driver pulley
1 x Full Mounting hardware Kit
1 x Drive belt
9. NEW GO KART TORQUE CONVERTER CVT CLUTCH 3/4" COMET TAV2 30-75 218353A Manco 12T #35
Feature
BRAND NEW 3/4" Torque Converter Kit For Go Karts1x 12 Tooth Sprocket for #35 chain. This kit comes with a 6" Driven Clutch.
fits all engines with a 3/4" Straight Crankshaft. Replaces Comet, Also Fits Manco Go Karts.
Please see pictures for all that is included.
*Free Same Day Shipping !!*All Orders Received By 1pm (EST) Will Be Shipped Out That Day* Same Day Shipping Only Applies Monday-Friday
Description
BRAND NEW 3/4" Torque Converter Kit, For Go KartsIncludes: 1 sprocket
1x 12 Tooth Sprocket for #35 chain
This kit comes with a 6" Driven Clutch.
fits all engines with a 3/4" Straight Crankshaft.
Replaces Comet
Also Fits Manco Go Karts
This kit includes:
1 x Drive belt
1 x Plastic Assy Cover
1 x 3/4" Driver pulley
1 x 5/8" bore driven pulley 6" diameter
1 x Aluminum Mounting Bracket Plate
1x 12 Tooth Sprocket for #35 chain
1 x Full Mounting hardware Kit
This kit has everything you will need!!
Please see pictures for all that is included.
10. GoPowerSports 30 Series Torque Conver 3 pc kit, 5957,5958,5959
Feature
3/4" Driver pulley Manco number 5957, Comet number 203814 or 2195525/8" bore driven pulley 6" diameter, Manco 5958, Comet 217772 or 219456
Drive belt asymmetrical, Manco 5959, Comet 203589
