When you looking for 2008 mitsubishi lancer headlights cover, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable 2008 mitsubishi lancer headlights cover is not an easy task. In this post, we show you how to find the right 2008 mitsubishi lancer headlights cover along with our top-rated reviews. Please check out our suggestions to find the best 2008 mitsubishi lancer headlights cover for you.
Best 2008 mitsubishi lancer headlights cover
1. BEAMTECH H11 LED Headlight Bulb, 50W 6500K 8000Lumens Extremely Brigh H8 H9 CSP Chips Conversion Kit
Feature
H11 led headlight bulb, Newest Korean CSP LED chips (Double-sided) Producing 8000 lumens output, Super bright with output 4000lm per light for safety driving at night, 6500K xenon white color, far more than the halogen lamp and HID lamp.Super long lifespan: > 30,000hrs, The power of each lamp only 25W, Waterproof driver and connectors level IP65.
Lamp low heat: far less than halogen lamp and HID lights, greatly prolongs the service life of lamps and lanterns.
Health and safety: no high voltage and large current startup, no circuit interference and electromagnetic radiation, No fan, driver smaller, installation easier, plug and play.
Good light beam pattern: with a narrow strip light of light emitting surface, close to the halogen design, rather than other products circular surface emitting.
Description
Light type: H11(H8,H9)Input Power: L/25W,H/25W
Operating Voltage: DC9-32V
Luminous Flux: L/4000LM,H/4000LM
IP Rate: IP65
Light Source Model: CSP Chip
Color Temperature: 6500K
Heat Dissipation Theory: Aviation aluminum 6063
Operating Life: >30000hrs
Operating temperature: -40C to +80C
2. ZEEZ Vinyl - 20% Smoke Black-Out Vinyl Headlight Taillight Tints
Feature
Color: 20% Smoke Black-OutSelf-adhesive, peel and stick
Stretchable with heat
Water resistant
Easy removal with no residual
Description
20% Light Smoke Gloss Black-Out Vinyl Headlight Taillight TintsFeatures:
- Not pre cut
- Self-adhesive, peel and stick
- Stretchable with heat
- Will not fade, chip, crack nor peel
- Water resistant
- Easily cleansed with water
- Long lasting
- Easy removal with no residual, will never damage your lamp
This is for one piece of self-adhesive Black-out vinyl film sheet for headlights, tail lights or fog lights. The standard size is 12" x 36" (30cm x 90cm), not pre-cut, the sheet thickness is about 0.005 inches.
Size For Each Order: 12" x 36"
Please Measure The Size of the Taillight and Calculate How Many Order You Will Need.
Quantity 1: 12" x 36"
Quantity 2: 12" x 72"
Quantity 3: 12" x 108"
::::::::::
::::::::::
Quantity 10: 12" x 360"
This is universal fitment. You can use this black-out vinyl film for any headlights, fog lights, sidemarker lights or even top part of the windshield, etc.
Simply clean the surface and apply this high quality vinyl sheet to anything smooth surface and cut off the edge. It will not damage your lamp nor leave any residual later when you remove this.
Package Include:
- One piece of Self-Adhesive Black-Out Vinyl Film Sheet
3. ZEEZ Vinyl - 35% Matte Black-Out Vinyl Headlight Taillight Tints
Feature
Color: 35% Matte Black-OutSelf-adhesive, peel and stick
Stretchable with heat
Water resistant
Easy removal with no residual
Description
35% Matte Finished Black-Out Vinyl Headlight Taillight TintsFeatures:
- Not pre cut
- Self-adhesive, peel and stick
- Stretchable with heat
- Will not fade, chip, crack nor peel
- Water resistant
- Easily cleansed with water
- Long lasting
- Easy removal with no residual, will never damage your lamp
This is for one piece of self-adhesive Black-out vinyl film sheet for headlights, tail lights or fog lights. The standard size is 12" x 36" (30cm x 90cm), not pre-cut, the sheet thickness is about 0.005 inches.
Size For Each Order: 12" x 36"
Please Measure The Size of the Taillight and Calculate How Many Order You Will Need.
Quantity 1: 12" x 36"
Quantity 2: 12" x 72"
Quantity 3: 12" x 108"
::::::::::
::::::::::
Quantity 10: 12" x 360"
This is universal fitment. You can use this black-out vinyl film for any headlights, fog lights, sidemarker lights or even top part of the windshield, etc.
Simply clean the surface and apply this high quality vinyl sheet to anything smooth surface and cut off the edge. It will not damage your lamp nor leave any residual later when you remove this.
Package Include:
- One piece of Self-Adhesive Black-Out Vinyl Film Sheet
4. ZEEZ Vinyl - 50% Dark Smoke Black-Out Vinyl Headlight Taillight Tints
Feature
Color: 50% Dark Smoke Black-OutSelf-adhesive, peel and stick
Stretchable with heat
Water resistant
Easy removal with no residual
Description
50% Dark Smoke Gloss Black-Out Vinyl Headlight Taillight TintsFeatures:
- Not pre cut
- Self-adhesive, peel and stick
- Stretchable with heat
- Will not fade, chip, crack nor peel
- Water resistant
- Easily cleansed with water
- Long lasting
- Easy removal with no residual, will never damage your lamp
This is for one piece of self-adhesive Black-out vinyl film sheet for headlights, tail lights or fog lights. The standard size is 12" x 36" (30cm x 90cm), not pre-cut, the sheet thickness is about 0.005 inches.
Size For Each Order: 12" x 36"
Please Measure The Size of the Taillight and Calculate How Many Order You Will Need.
Quantity 1: 12" x 36"
Quantity 2: 12" x 72"
Quantity 3: 12" x 108"
::::::::::
::::::::::
Quantity 10: 12" x 360"
This is universal fitment. You can use this black-out vinyl film for any headlights, fog lights, sidemarker lights or even top part of the windshield, etc.
Simply clean the surface and apply this high quality vinyl sheet to anything smooth surface and cut off the edge. It will not damage your lamp nor leave any residual later when you remove this.
Package Include:
- One piece of Self-Adhesive Black-Out Vinyl Film Sheet
5. 12 by 48 inches Self Adhesive 20% Dark Black Headlights, Tail Lights, Fog Lights Tint Vinyl Film
Feature
1 piece 12 by 48 inchesColor: 20% Dark Black
Self-adhesive, peel and stick
Stretchable with heat and water resistant
Easily cleansed with water and easy to remove without residual
Description
This page features one piece self-adhesive 20% Dark Black vinyl film sheet in
glossy finishing for headlights, tail lights or fog lights.
The size is 12" x 48" (1' x 4'), the sheet thickness is about 0.005 inches.
when you order:
Quantity 1: 12" x 48"
Quantity 2: 2 separated pieces of 12" x 48" and so on....
Fitment:
Universal Fit. You can use this vinyl film for any headlights,
tail lights, fog lights, sidemarker lights or even top part of the windshield,
etc.
Simply clean the surface and apply this high quality vinyl sheet to anything
smooth surface and cut off the edge. It will not damage your lamp nor leave any
residual later when you remove this.
Please note:
It is not pre-cut to any lamp's exact shape.
6. iJDMTOY 12 by 48 inches Self Adhesive 20% Dark Blue Headlight, Tail Lights, Fog Lights Tint Vinyl Film
Feature
1 piece 12 by 48 inchesColor: 20% Dark Xenon Sky Blue
Self-adhesive, peel and stick
Stretchable with heat and water resistant
Easily cleansed with water and easy to remove without residual
Description
This page features one piece self-adhesive 20% Dark Xenon Sky Blue vinyl film sheet in glossy finishing for headlights or fog lights.
The size is 12" x 48" (1' x 4'), the sheet thickness is about 0.005 inches.
when you order:
Quantity 1: 12" x 48"
Quantity 2: 2 separated pieces of 12" x 48" and so on....
Fitment:
Universal Fit. You can use this vinyl film for any headlights, fog lights, sidemarker lights or even top part of the windshield, etc.
Simply clean the surface and apply this high quality vinyl sheet to anything smooth surface and cut off the edge. It will not damage your lamp nor leave any residual later when you remove this.
Please note:
It is not pre-cut to any lamp's exact shape.
7. SiriusLED Extremely Bright 30W LED Bulbs with Projector for Fog Lights Daytime Running DRL Driving H11 6000K Xenon White
Feature
A pair of 30W LED bulbs that are used to upgrade your Day-Time Running Lights (DRLs) and Foglights (not suited for use with headlights and does not have duel Hi-Low beam functions).Each bulb has 6 individual 5W LED chips with projection technology that increases light density and distance to give you that very bright pure white light output.
Compatible fitment size for H11 (confirm correct size needed before ordering).
No hassle plug-and-play installation, manufactured with high grade aluminum that is durable and weather resistant.
Note: A load resistor kit might be necessary for vehicles equipped with CANBUS system to bypass the error codes.
Description
Comes with a set of two 30 Watts LED bulb that are used to upgrade your foglights or day-time running lights (DRLs), but not compatible to be used as your primary light source (headlights).Each bulb has 6 individual 5W LED chip with projectors to increase the light emission and output, color is equivalent to 6000K temperature that is pure white.
This set of bulbs are applicable for size H11, please double check the size needed for your specific vehicle before purchasing.
Quick and easy plug-and-play installation that fits right into original light housings.
Manufactured with high quality aluminum that is durable and weather resistant.
Be advised that a load resistor kit might be needed for vehicles that has CANBUS system in order to eliminate error indications generated by the on-board computer scan.
Comes with our 1 year warranty guarantee.
8. 9005 HB3 LED Headlight Bulbs High Beam with Fan, SEALIGHT S2 Series Mini Design Upgraded CSP Chips 6000K Xenon white IP67-2 Year Warranty (2 Pack)
Feature
1:1 DESIGNUpgraded 1:1 smallest design same as your halogen bulbs, can match for 100% vehicles. ATTENTION: If your high beam shared same bulb with DRL,maybe headlight will be flicking on DRL mode because too power to light up,please contact with us timely. Polarity free, JUST PLUG N PLAY, Super easy to install and it will not bust up the reflector cap in the assembly.EFFICIENTLY COOLING SYSTEMHigh quality heatsink aluminum and 12,000 RPM powerful turbo cool fan to ensures your LED Headlight bulbs Over 30,000 hrs of brilliant continuous light.
PERFECT LIGHT OUTPUT Brightness increased by 3 times. High focus and max light output with a wider and farther area, creates a professional light pattern.
FITMENT9005/HB3 as headlight.For some vehicles, like BMW, Mercedes Benz, Mini Cooper, Audi, Dodge, Jeep, Chrysler, Volvo etc maybe need additional resistor to decode. AMAZON GUIDE may not be 100% accurate or up to date. If you are not sure which bulb size will fit for your vehicle. Please check your ONWER MANUAL or refer to your original headlight part number or contact us directly.
SEALIGHT PROMISE Buy with confidence, no hassle on return or exchange.We offer "24 MONTHS" warranty, friendly customer service and U.S. local customer support.
Description
WHY CHOOSE SEALIGHT LED BULBS?SEALIGHT specializes in designing and supplying automotive led lights, aiming at customer satisfaction, providing high quality products and excellent service.
Buy it with confidence,We provide "30 days money back and 2 years warranty" for verified defectively manufactured products.
ATTENTION:
The Built-in Smart Chip with Canbus has been fully upgraded. But for some sensitive vehicles like newer Jeep, Dodge, Chrysler or some European vehiclesit may require to add anti flicker harness or led headlight decoders in addition. Please contact us if you need.
Features:
- EASY INSTALLTION: All in one headlight kit ,no more modification on headlight housing or cover. Perfect choice if you want to upgrade your headlights to LED type
- EFFICIENTLY COOLING SYSTEM & THE NEWEST CSP: Special aluminum alloy shell, high efficient silent fan, high quality controlled Newest CSP clip. Longer lifespan, fast response time.
Specifications
1. LED Color: Super White 6000K.
2. Voltage: DC 12-24V.
3.IP Rate: IP67
4.Lifespan: More than 30000 hours
5.Canbus Error FreeNo warning for most of the cars.The decoding function may not work for all vehicles.Some known incompatible vehicles like BMW, Mercedes Benz, Mini Cooper, Audi, Dodge, Jeep, Chrysler, Volvo etc, If it does not work for your vehicles, please contact us!
ATTENTION: If your high beam shared same bulb with DRL,maybe headlight will be flicking on DRL mode because too power to light up,please contact with us timely.
TIPS
Amazon filter system may not be 100% accurate, The bulb size may vary between trim of your vehicle. Please double check owners manual or original bulb size to confirm before placing an order.If you are not sure which size bulbs fit with your car ,please kindly ask us before purchasing.
9. iJDMTOY (2) Universal Rubber Housing Seal Caps For Headlight Install Xenon Headlight Kit, Aftermarket Headlamp or Retrofit
Feature
Good for xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights, and many more of your retrofit lighting assembliesSeals your aftermarket retrofit LED assemblies and protects them from water condensation, moisture, dust, and other unwanted substances
Made with high quality flexible rubber that is ideal for retrofit lighting assemblies
This listing is for 2 pieces of universal fit rubber caps: the sizing accommodates a majority of xenon LED retrofit assemblies
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
Tired of unwanted substances getting into your precious retrofit lighting assemblies? These rubber housing seal caps conveniently seal out any water condensation, moisture, dust, and more from your retrofit lights to keep all the lights working. These rubber caps protect your xenon headlight conversion kits, aftermarket LED headlights, retrofit headlights and more so you can have peace of mind that your lights will be long lasting.
Since these rubber caps are universal fit, there are holes in the cap to allow you to thread the wiring through.
Universal for most vehicles:
Acura Integra MDX NSX RDX RSX TL TLX TSX
Audi A3 A4 A5 A6 Q5 Q7
BMW 1 2 3 4 5 6 7 series X1 X3 X5 X6 Z4
Cadillac CTS Escalade
Chevrolet Avalanche Camaro Colorado Corvette Cruze Malibu Silverado 1500 2500 3500 Tahoe
Dodge Challenger Charger Dart Durango Neon Nitro Ram
Ford Edge Escape Explorer F-150 F-250 F-350 Fiesta Flex Focus Fusion Mustang
GMC Canyon Denali Sierra Yukon
Honda Accord Civic CR-V CR-Z Element Fit Pilot S2000
Hyundai Genesis Santa Fe Sonata Tiburon
Infiniti EX35 FX35 FX45 FX50 G35 G37 M45 M35 M37 M45 M56 Q50 Q60 QX56 QX60 QX70 QX80
Jeep Grand Cherokee Liberty Wrangler
Lexus CT ES GS GX HS IS LS LX RX
Mazda 2 3 5 6 CX-5 CX-7 CX-9 Miata RX-8
Mercedes C CL CLA CLK CLS E GLA GLK M Class
MINI Cooper
Nissan 350Z 370Z Altima Cube Frontier GT-R Juke Maxima Murano Rogue Sentra Titan
Scion FR-S FRS tC xA xB xD
Subaru BRZ Forester Impreza Legacy WRX STI
Toyota 4Runner Camry Corolla FJ Cruiser Highlander Prius RAV4 Sequoia Sienna Tacoma Tundra
Volkswagen Beetle CC Golf GTI Jetta Passat Rabbit, etc
10. 9005 HB3 LED Headlight Bulbs High Beam Conversion Kit, Marsauto Upgraded 12 CSP Chips 9000 Lumens LED Headlamp 6000K 6500K Cool White (Pack of 2)
Feature
SEE CLEAR, FELL DIFFERENTCool 6000K-6500K white color; Powered by Advanced Bright LED Circuitry Technology, No dark spot, No foggy light;Working Voltage: 12V - 24V.SIMPLE & EASY TO INSTALL1VS1 with stock bulb & Non-Polarity design ,only need a few minutes to get rid of the dim halogen lights to get a different bright field of view.Let you see farther and clearer
HIGH LUMEN, FELL SAFENewest Korean CSP LED chips producing 9000 lumens output will grant perfect visibility even at night and under heavy rain.
PERFECTLY FIT UR VEHICLE fit for 9005/HB3Hi/Lo Beam/Fog Light depend on your vehicle model.check the reference table for your vehicle perfect fit in the above amazon filter system. NOT FIT THE HOUSING OF 2015-2018 F150.
SATISFACTION GUARANTEE we love what we do, so we offer no-question full refund for 30 days and life-time technology support. AMAZON GUIDE may not be 100% accurate or up to date. If you are not sure, Please check your ONWER MANUAL or refer to your original headlight part number or ask for seller directly.
Description
WHY CHOOSE Marsauto LED BULBSMarsauto specializes in providing high performance LED bulbs, aiming at customer satisfaction, providing high quality products and excellent service.
we love what we do, so we offer no-question full refund for 30 days and life-time technology support.
NOTES:
The Built-in Smart Chip with Canbus has been fully upgraded. But for some sensitive vehicles like newer Jeep, Dodge, Chrysler or some European vehiclesit may require to add anti flicker harness or led headlight decoders in addition. Please contact us if you need.
Specification:
LED Type: CSP
Color Temp: 6000K-6500K Cool White
Waterproof rate : IP 68
Beam Angle : 360
Connector Type :Plug and Play
IF YOU HAVE ANY PROBLEM,PLZ FEEL FREE TO LET US KNOW, AND WE WILL OFFER ASSISTANCE TIMELY.
