Finding the best air hydraulic pump double acting suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best air hydraulic pump double acting
1. Mophorn Hydraulic Power Unit 8 Quart Pump Double Acting Hydraulic Power 12V DC Metal Reservoir Hydraulic Pump Power Unit for Dump Trailer Car Lifting (8 Quart Steel Double Acting)
Feature
Tank Capacity:8 Quart..Displacement of hydraulic pump: 0.825GPM. Relief valve pressure: 22 MPA (3200 PSI Max).Hydraulic pump rated speed: 2850R/MIN.Motor Power:0.8- 3 KW;Motor voltage: DC 12V.1500 PS Max Relief Setting on B port.SAE # 6 Port, Horizontal mount.
Double acting power-up/power down.Hand held pendant with about 15 foot( 4.5m)removal cord and start solenoid.
This hydraulic pump is the perfect replacement pump for 12V DC remotely controlled hydraulic systems; The hydraulic power unit is used as a fuel supply device through external pipe system connected to a number of hydraulic cylinder to control multiple sets of valve movement.
This unit is suitable for control of a set of double-acting cylinder. Widely used in small dump truck, hydraulic winch, etc.
Description
Hydraulic Pump 8 Quart Double ActingThis power unit designed for medium and small lift platform, by the high pressure pump, ac motor, multi-purpose integrated block, hydraulic valve, fuel tanks and other components combined into one. Reduced lift platform controlled by electromagnetic unloading valve, falling speed is controlled by a bulit-in balancing valve. Back-up manual unlaoding valve is used to power down. It's widely used in stacker, samll and medium-sized lifting platform and various industrial fields.This unit comes standard in many dump trailers and It is a direct replacement for most power-up/power-down applications. Its high quality starter ensure long life and a fast starting each time. The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.
Feature:
Perfect for Dump Trailers-Lift Gates
Perfect replacement pump for 12VDC controlled hydraulic systems
Designed for horizontal mounting
Fluid choice determined by operating environment/temperature
Oil tank, oil pump and accumulator power independent airtight oil source system.
Petrol stations can be equipped with PLC control system, which controls all internal hydraulic functions and generates a signal and control exchange (DCS).
Supply oil to the system under normal, oil pump, automatic stay system rated pressure, through the control valve atresia, achieve the function of valve in any position.
Specifications:
Material of tank: 8 Quart Metal
Rated speed: 2850R/MIN
Motor voltage: DC12-DV24
Double acting Power-Up/Power Down
1500 PS Max Relief Setting on B port
SAE # 6 Port, Horizontal mount
Package Content:
18 Quart Metal Reservoir Double Acting Hydraulic Pump
1Manual
2. VEVOR 2510A Air Powered Hydraulic Pump 10,000 PSI Quick Power Air Foot Pedal Pump
Feature
Durable Material-Rugged construction parts are built for long life and extremely durable.Foot Control-Release pressure to return fluid with foot pedal pump.
Tuff Coat-Baked Powder TUFF COAT finish maximizes assembly corrosion resistance.
Easy To Use-Easy to install with all-around ideal power source which develops 10,000 PSI at 100 PSI air, all accessories included.
Applicable Range-Include heavy machinery rigging and moving, auto repair, oil rigging, machine maintenance.
Description
The 2510A Stinger Air/Hydraulic Pump is made of rugged construction parts are built for long life and easy service. It is an ideal all-around power source that develops 10,000 PSI at 100 PSI air. It is designed with a 2-stage release mechanism, internal relief valve as well as a 3/8 inch NPTF oil port and 98 cubic inches of usable oil.Quick Type
3/8" NPT connector quick hydraulic coupler with dust cap.
Baked Powder Finish
Baked powder TUFF COAT finish maximizes assembly corrosion resistance.
Foot Control
Foot pedal pump release pressure to return fluid.
Widely Applicable
Suit for heavy machinery rigging and moving, auto repair, oil rigging, machine maintenance.
All Metal Construction
Built to handle tough industrial applications with all metal construction.
NO After-Sale Worry
For this product, we provide 2 years warranty, no need to worry about any problems.
Brand: Vevor
Condition: New
Useable oil: 98 cu. in.
Air inlet: 1/4" NPT
Oil port: 3/8" NPT
Weight: 16.3lb (7.4kg)
Dimensions (Lx Wx H): 12"x8.6"x7.8" (31x22x20cm)
Pacekage:
1 x 2510A Stinger Air/Hydraulic Pump
As Picture Shows
3. Mophorn Double Acting/Single Acting Hydraulic Pump Dump Trailer Steel/Plastic Hydraulic Power Unit (Steel, 15 Quart/Single Acting)
Feature
SPECIFICATIONS: Reservoir Capacity: 3.75 gal (15 qt); Material: Metal Reservoir; Port: SAE#6;Mount: Horizontal Mount; PSI: 3200 PSI Max; Power Source: 12V DC; GPM: 2GPMFUNCTION: Power Up / Power Down; Pump Action: Single Acting; Hand held pendant with 20 foot removal cord
FEATURES: Perfect for Dump Trailers-Lift Gates; Perfect replacement pump for 12VDC controlled hydraulic systems; Designed for horizontal mounting; Standard duty 12VDC Motor; Fluid choice determined by operating environment/temperature
APPLICATION: Our power units are some of the most reliable and durable units in the industry for use with dump trailers, dump trucks, RV's, boat lifts, lift gates, tow trucks, wreckers, car haulers, agriculture equipment, snow plow equipment and a variety of other applications that require a powerful and compact hydraulic pump
NOTE: Pictured is a Single acting pump, the Single acting pump can be purchased with a 4, 6, 8, 10 or 15 qt reservoir
Description
Description:
Precautions:
The hydraulic power unit when leaving the factory, the system pressure has been set. If you want to change, the user according to the actual situation on their own through the knob to adjust the system pressure regulating valve, but no more than nominal pressure of the system Carefully check the motor and the electromagnetic valve connection. It is strictly prohibited to pick up
In the installation and debugging for the first time, we mustkeep the internal fuel tank oil level, after a work cycle, oil tank should be made up, but not be too full
Electrical and electromagnetic valve connection should pay special attention to the supply characteristics( ac, dc voltage and has the same sign. Ac power motor shell must be reliable grounding, forbidden ground operation. The motor terminal box note waterproof, moisture-proof. Connection for the first time, inching motor check direction, from the motor back end, spin to counterclockwise. Absolutely forbidden motor reverse reverse rotation and oil-free idling
When the gas tank hydraulic oil must be filtered, filtration precision is not lower than 25 microns
Power unit can't filter the impurities inside the hydraulic cylinder. So the hydraulic cylinder internal must clean. Lest cause valve failure. Tubing must also be clean
Maintenance:
We must keep the actuators, and pipeline cleaning, prevent dirt from entering the system ; We must keep the tank oil level, after a work cycle, proper fill oil. Such as pump suction air will cause the damage of pump and the damage of the seal
100 hours after the running of hydraulic oil for the first time to join, change the new oil. after 1500 hours to replace a new oil; Hydraulic oil viscosity for 22 and 46 was commonly/s ; Working environment temperature high use hydraulic oil of high viscosity, low working environment with low viscosity oil
4. Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated Hydraulic Pump for Auto Body Frame Machines and Pulling Post
Feature
Max Input Air Pressure: 120 PSI;Max Output Hydraulic Pressure: 10,000 PSIConnector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap
Control: Foot pedal pump - Release pressure to return fluid
All metal construction built to handle tough industrial applications
Compact design for field use on construction sites and maintenance jobs
Description
Air Hydraulic Pump Power Pack Unit 10,000 PSI 103 In 3Cap
This machine is made of rugged construction parts are built for long life and easy service. Baked Powder TUFF COAT finish maximizes assembly corrosion resistance and 5ft with 3/8 NPT quick hydraulic coupler with dust cap.
Advantages
It is designed to be used with single acting cylinders.
Provides hands free operation for pumping and releasing load.
TUFF COAT finish maximizes assembly corrosion resistance and 5ft with 3/8 NPT quick hydraulic coupler with dust cap.
Feature:
Built to last with fully rebuildable components
All Metal Construction built to handle tough industrial applications
Baked Powder TUFF COAT finish maximizes assembly corrosion resistance
5ft with 3/8 NPT Quick hydraulic coupler with dust cap
Compact design for field use on construction sites and maintenance jobs
Specification:
Type: Air Powered Hydraulic Pump
Action: Single acting
Control: Foot pedal pump - Release pressure to return fluid
Includes Hydraulic Hose: 5 ft with 3/8 NPT - Quick hydraulic coupler with dust cap
Flow Rate: 0.85 liters (0.22 gallons) per minute
Air Connection: 1/4" Female NPT
Hydraulic Oil Type: AW-46
Oil Capacity: 103 in (1.7 liters / 1700 cc), 0.45 gallons
Max Input Air Pressure: 120 PSI
Max Output Hydraulic Pressure: 10,000 PSI
Connector Type: 3/8" NPT ISO 14540 quick hydraulic coupler with dust cap
Weight: 17.72lb
Dimensions (L* W* H): 12.2"*8.26"* 7.4"
Package Content:
1x Blue foot pump
1x High pressure oil pipe
2x Quick connector
1x Air gun connector with air pipe
1x Manual
5. Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated Hydraulic Pump for Auto Body Frame Machines and Pulling Post (10000 PSI 0.22 Gal Reservoir Orange)
Feature
3 Pedal Functions-Apply pressure, hold pressure, release pressure.Wide Application-Suitable for all 10 ton rams, frame and body work, Use able oil 98 cubic inches.
Overload Pump Saver- Built in safety overload pump saver with 3/8 NPT oil output.
Real Metal Wire-Real metal wire not the nylon thermos plastic.
Pro Grade Quick Disconnect-10,000 PSI pro grade quick disconnect coupling, 6 foot 10,000 PSI "JACK HOSE" with 20K bursting capacity.
Description
The air foot pedal hydraulic pump with 10,000 PSI output is our best selling item. 10,000 PSI pro grade quick disconnect coupling, and a 6 foot 10,000 PSI"JACK HOSE"with 20K bursting capacity full 3/8 inside dimension for high flow rate and real metal wire not the nylon thermos plastic.Widely Applicable
Use able oil 98 cubic inches, suitable for all 10 ton rams, frame and body work.
Built In Safety
3/8 NPT oil output, safely builds to 10,000 pounds and has a built in safety overload pump saver.
Standard 3/8 NPT
All threads on all components in set are standard 3/8 NPT.
Multiple Functions
Apply pressure, hold pressure, release pressure.
Release Easily
Can release and remove foot as release / return takes effect by release lock plate.
Long Lasting Seal
Designed to absorb the high pressure from pump with a Teflon back up for long lasting seal performance.
Condition: New
Air inlet: npt
Oil output: 3/8 npt
Oil flow / delivery: 7.6 inches per minute (w/load) 49.5 inches per minute (w/o load)
Reservoir capacity: gallon
Functions: 3 pedal
Net weight: 14 pounds (With oil)
Package:
1 x Air Foot Pedal Hydraulic Pump
6. 110V Electric High Pressure Hydraulic Pump With Double Acting Manual Valve New
Feature
Model : GYB-630-2 ; Function : Double-acting, manual valveRated Pressure : 70Mpa ; Oil Flow : 0.6-7L/min
Control : Foot Switch/Hand Switch ; Voltage : 110V/60Hz 750W
Oil Capacity : 7L
Description
Usage:Before using the pump,check the oil tank of the pump,make sure there has enough oil in the oil tank and higher than the oil-window.
1.Open the air-out screw before operating the pump;
2.Inspect the oil pressure by the gauge;
3.Change the hydraulic oil every 18 months;
4.Filter the oil before changing the oil,#10 hydraulic oil is recommended;
5.Handle the pump at 10-50;
6.Stop working once the motor is hotter to a higher temperature to protect the whole pump system;
7.Keeping replacing the oil hose once any damaged or aging,the standard rated pressure of oil hose is 70Mpa;
8.Replace the bearing and lubricate them according every 18 months.
7. Mophorn Air Hydraulic Pump 10000 PSI 1/2 Gal Reservoir Hydraulic Foot Pump Air Treadle Foot Actuated Hydraulic Pump for Auto Body Frame Machines and Pulling Post (10000 PSI 1/2 Gal Reservoir)
Feature
Maximum adjustable pressure: 10,000PSI;Reservoir capacity: 1/2 gallon1/4 NPT air inlet. Pump operates on 90-145 PSI (90+ minimum);3/8 NPT oil output, safely builds to 10,000 pounds and has a built in safety overload pump saver.
Release lock function enables pedal to be locked in the released position without having to depress and hold the pedal
This hydraulic foot pump provides hands-free pumping and release of load
This air foot pump is designed to be used with single-acting cylinders only,efficiently operates many industrial and construction single acting ram applications
Description
10000 PSI Capacity Air Over Hydraulic Foot Pump Air Actuated Hydraulic Treadle Pump
Introduction :
This 10000 PSI Air Treadle Pump 98 cubic inch Reservoir Efficiently operate any single-acting rams up to 55 ton capacity in many industrial and construction applications. Provides up to 10,000 PSI with standard shop air supply of 90-175 PSI. User friendly foot-actuated design for easy control of moving fluid at tremendous rat. Use 3/8 inch NPT fluid coupler. Made of durable light weight corrosion-free aluminum. Built-in pressure by-pass system protects overload operation.
Technical Datas
Type: Air Powered Hydraulic Pump
Action: Single acting
Control: Foot pedal pump - Release pressure to return fluid
Reservoir capacity: 1/2 gallon
Shell Material: Strengthen the aluminum alloy
Fuel tank capacity: 91.5 cubic inches/1.5L
Maximum oil output: 1.3L
The oil pressure: 75mpa
Air Pressure Rating: 90-175 PSI
Pressure range: 0.5 or more
Maximum adjustable pressure: 10,000 psi / 700 kg / cm3
Output oil: 98 cubic inches / 1.6 liters
The oil hole: 3/8NPTF connection
Intake: 1/4 NPT connection
Total mass: 8.0kg
Features
Ideal all-around power source develops 10,000 PSI at 100 PSI air
Release lock plate so operator can release and remove foot as release / return takes effect.
3 pedal functions, Apply pressure, Hold Pressure, Release pressure.
Quiet smooth operation, brass air muffler for low operating noise.
Applications Include:
Heavy Machinery Rigging and Moving, Auto Repair, Oil Rigging, Machine maintenance
8. Happybuy 12V/DC Hydraulic Pump Double Acting Solenoid Operation Supply Unit W/ Remote Controller Hydraulic Power Unit For Dump Dump Truck Unloading Crane Lifting (4 Quart Double Acting Plastic)
Feature
PlasticTank:4 Quart.Displacement of Hydraulic Pump: 0.825GPM .Relief Valve Pressure: 22 MPA (3200 PSI Max. Relief Setting For Increased Lifting Power on A port);1500 PS Max Relief Setting on B portHydraulic Pump Rated Speed:2850R/MIN;Motor Voltage:DC12-DV24;Motor power: 0.8--3KW
Double acting power-up/power down.Hand held pendant with about 15 foot removal cord and start solenoid;SAE # 6 Port, Horizontal Mount
The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.Its high quality starter ensure long life and a fast starting each time
This hydraulic power unit is suitable for control of a set of double-acting cylinder. Widely used in small dump truck, hydraulic winch, etc.
Description
4 Quart Hydraulic Pump 12V DC Double Acting Hydraulic Power UnitThis Hydraulic Power Unit consists of high pressure gear pump, DC motor, multi-purpose integrated block, various function valves, oil tank and other components. It is widely used as the power resource for lifting and pushing device.The double acting type models are with power driving in both directions
Technical Parameters:
*Quart: 4 Quart
*Reservoir:Plastic Reservoir
*2.0 GPM; SAE # 6 Port
*Voltage: DC 12V
*Acting: Double-acting
*Mounting: Horizontal Mount
*1500 PS Max Relief Setting on B port
*3200 PSI Max. Relief Setting for Increased Lifting Power on A port
*Application: for Dump Truck, Unloading, Crane, Lifting, etc.
Operation Method :
1 According to hydraulic principle diagrams, with clean connecting hydraulic powe unit and oil cylinder tubing.
2 According to the motor and the power of the electromagnetic valve marked characteristics( ac, dc voltage is properly connected. )
3 Inching motor observe any abnormal phenomenon. In actuators,without load, start the electric, short run test, check whether all the parts run smoothly, determine and correct after loading step by step to normal operation.
Package Include:1PC 12V 4 Quart Double Acting Hydraulic Pump Item
(Notice:Please Feel Free To Contact Us When You Have Problems On Installation)
9. Happybuy Hydraulic Pump Electric Double Acting Manual Valve Hydraulic Pump 10000 PSI 0.75KW Driven Hydraulic Pump for Home and Commercial Using (Double Acting Hydraulic Pump)
Feature
Pump Model: DYB-63B-2; Function: Double-acting, manual valveHydraulic Pump Electric Working pressure: 63MPA; Flow: 1L/Min; Oil capacity: 8L; Motor power: 0.75KW
This electric oil pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank
Overpressure unit of pressure safety valve to avoid over pressure damage or extremely pressured. At 700kg/cm2,pressure release automatically
If the electric hydraulic pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency
Description
Hydraulic Pump Electric Double Acting Manual Valve Hydraulic Pump 10000 PSI
This electric oil pump is composed of three-phase asynchronous motor, high-pressure oil pump and fuel tank. It has the advantages of small size, high pressure, light weight, simple structure and easy to use. The pump is equipped with pressure gauge so as to observe the pressure when the pump is working at any time.
Item Specifications
Function: Double-acting, manual valve
Input voltage: 110V 60HZ
Motor power: 0.75KW
Electric current:3.5A
Working pressure: 63MPA
High pressure:70Mpa(10000PSI)
Low pressure:2Mpa(300PSI)
Oil capacity: 8L
Rotate speed:1400r/min
The role of maintenance Note:
1, the oil pump with 20 oil.
2, the oil storage capacity must be within the scope of the oil window.
3, each refueling and oil, you must use more than 80 mesh filter oil filter, the need to clean the replacement tank. The oil change period is six months.
4, working oil temperature of 10 degrees Celsius to 50 degrees Celsius.
5, start the electric pump before the need to open the venting nut, open the switch placed in unloading position.
6, the use of the motor temperature is too high, should stop using. Self-cooling and then use.
8, high-pressure tubing factory into, after 105MPA test. But because the hose is easy to aging, so the user should always check, usually six months, frequent use for three months, 87.5MPA pressure test, if damaged, raised, leakage phenomenon, can not be used.
Appication:
1. The pump can be used for a variety of hydraulic equipments.
2. If the pump is equipped with other hydraulic tools, it can work on several assignments such as lifting, pressing, bending, straightening, cutting, assembly and disassembly. Reduce manual work and maximize work efficiency.
Package Content
1 x Electric Driven Hydraulic Pump
2 x Oil Hoses
