Finding the best alpine bass knob mrv m500 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best alpine bass knob mrv m500
1. Alpine RUX-KNOB.2 Remote Bass Level Control
Feature
Works with Newer X Series Alpine AmplifiersBackwards Compatible with PDX Amplifiers
Description
The RUX-KNOB.2 remote level controller works with Alpine's amplifiers so you can manage your bass level from the front of your vehicle. This handy little knob adjusts your amp's level from its set maximum volume all the way down to virtually "off." Since it adjusts level and not "bass boost," you'll maintain the same bass tone as you turn the volume up and down. You can control multiple amplifiers with a single remote by adding a standard phone cable splitter (not included).2. Alpine RUX-KNOB Remote Bass Level Control Knob for PDX-M12 and PDX-M6
Feature
Remote Bass Level Control Knob16-1/2" (5 meters) Connection cable
Plugs directly in for quick direct subwoofer control
Remote level controller for Alpine PDX and MRX Series amplifiers
Easily adjust the bass gain of your amp while seated inside
Description
Remote Bass Level Control with 5m Connection Cable.Remote Bass Level Control Knob|16-1/2" (5 meters) Connection cable|Plugs directly in for quick direct subwoofer control|Remote level controller for Alpine PDX and MRX Series amplifiers|Easily adjust the bass gain of your amp while seated inside3. Alpine MRV-M1200 Monoblock 1200 Watts RMS Class D Amplifier
Feature
Amplifier Type: Class-D (Digital) | Channel Design: 1 Channel (Mono) | Power Supply Design: DC-DC PWM | Power Supply: MOSFET | Pre-Amp Stage: Discrete | Final Outputs: Power MOSFET | Crossover: Variable Lowpass FilterGain Control: Continuously Adjustable Gain Control | Remote Turn On: Remote Sensing Function (for Speaker Level Input) | Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection | Board Circuitry: S.T.A.R. Circuit | RCA Output: Non-Fading Pre-Amp Output (4 Volts)
Speaker-Level Inputs: 4-channel Speaker Level Inputs | Power Indicator: Top Mounted Blue LED Power Indicator | Thermal Control: Multi-stage Power Limits | Power Requirements: 14.4 V.DC (11-16V allowable) | Input Sensitivity (RCA Input): 0.15 - 4.0 V | Input Sensitivity (Speaker Level Input): 0.4 - 10 V | Input Impedance: >10k ohms
Frequency Response (+0, -3dB: 1W into 4 Ohms) for Subwoofer: 7 -400 Hz | Damping Factor (10W into 4 Ohms at 100Hz): >750 | Signal to Noise (1W into 4 Ohms): >85 dB | Signal to Noise (Rated Power into 4 Ohms): >105 dB | Preamp Output: 4.0V Max. | Remote Level: -20 to 0 dB
RMS Power Ratings: Per channel into 4 Ohms: 600W RMS x 1 (14.4V at <1% THD+N) | Per channel into 2 Ohms: 1200W RMS x 1 (14.4V at <1% THD+N) | Max Power Output Ratings: Total Max Power: 2400 W | Dimensions: Foot Print (WxHxD) in: 7.87 x 2.16 x 7.87 in | Heat Sink (WxHxD) in: 6.50 x 2.16 x 7.87 in
Description
ALPINE MRV-M1200 AMP 1 CHANNEL 2400 WATTS MAX SUBWOOFERS SPEAKERS BASS AMPLIFIER NEW4. MRV-M500 - Alpine Monoblock 500W RMS V Power Series Car Amplifier
Feature
MRV-M500 - Alpine Monoblock 500W RMS AmplifierEvolution to Class D digital platform
New snap-on terminal covers for easy installation
Current Protection: Over-Current, Over-Voltage, Under-Voltage and Thermal Protection
Dimensions (WxHxD) in: 7-7/8'' x 2-3/16'' x 7-7/8''
Description
V-Power Series Class D Monoblock Digital Amplifier RMS Power Rating: 4 ohms: 300 watts x 1 chan. 2 ohms: 500 watts x 1 chan. Max power output: 500 watts x 1 chan. Integrated wire and mounting screw terminals S.T.A.R. circuitry LED power (blue) and protect (red) indicators Variable Bass Boost (0 to +12 dB bass boost at 50 Hz) Soft start turn-on 4 or 2 channel operation 4-channel speaker-level inputs Preamp RCA outputs to daisy chain multiple amps 3-way protection circuitry (thermal, overload, and speaker short protection) Dual speaker terminals simplify the hookup of multiple speakers Heavy duty aluminum alloy heat-sink Input sensitivity: 0.4V - 10V Non-fading pre-amp output Variable low-pass filter (50-400 Hz, 24 dB/octave) CEA-2006 compliant amplifier5. Alpine X-A90M X-Series Mono Power Density Amplifier
Feature
Handles 600 watts of RMS powerClass-D performance with variable high- and low-pass filters
Features a top-side control panel
Built-in Bass EQ and crossover
Compatible with the RUX-KNOB or RUX-KNOB.2 bass remotes
Description
Put some ultimate sound quality and some ultimate power in your ride by investing in the Alpine X-Series X-A90M 600-Watt Monoblock Power Density Amplifier. This amplifier boasts 600 watts of RMS power, as well as class D performance, variable high- and low-pass filters, and integrated crossover and bass EQ. It also features a crossover frequency of 50-400 Hz and signal-to-noise ratio of 107 dB. No matter what your audio setup looks like, take it to new heights with the Alpine X-Series X-A90M 600-Watt Monoblock Power Density Amplifier.6. Alpine SWS10D4 / SWS-10D4 / SWS-10D4 Type-S 10 Car Subwoofer
Feature
1000W Peak500W RMS
Dual 4-Ohm Voice Coil
Kevlar Reinforced Cone
Hamr Surround Performance