Finding the best amp meter line splitter suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best amp meter line splitter
1. Extech 480172 AC Line Splitter
Feature
Allows clamp meter to measure AC current on a 2-wire or 3-wire power cordProvides easy and safe measurements of current without the need to cut off the plug and separate the conductors
Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground)
Also features voltage check function
Description
Extech 480172 AC Line Splitter, Provides Easy and Safe Measurements of Current without the Need to Cut Off the Plug and Separate the Conductors, Voltage Check Function
This Extech 480172 Line Splitter provides a fast and easy way to "open" standard 120 Volt AC electrical lines, eliminating the need to cut off the plug and separate the conductors. When connected between a 120 Volt AC outlet and a device under test, this splitter separates the hot/live conductor from the neutral and ground, which enables users to measure AC current up to 15 Amp on a two-wire or three-wire lines using a clamp meter. This splitter also features two Voltage Test jacks so that voltage can be measured using a multimeter.
Key Features- Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
- Plugging the power connector into the Line Splitter separates the hot/live conductor from the neutral (and ground)
- Voltage check function
- Two clamp positions: x1 for direct readings, x10 for actual reading multiplied by 10
- Dimensions: 5.25"x2"x1" (133x51x25mm)
- Weight: 5.8 oz (164.4g)
2. Tacklife MLS01 Classic AC Line Splitter 250V 15A Voltage Current Power Cord Test Clamp Meter Accessories
Feature
Clamp Meter Partner- Assist clamp meter to measure the AC current on a 2 or 3 wire power cord without break power cordAmplification Testing-1X loop for direct readings, and 10X loop for low-current measurements
WIDE RANGE- Rated Up to 250V and 15A measurement range
EASY TO USE- Provide safe connection to plug connector without cut off plug or separate the conductors; And Built-in voltage measurement jacks to check for voltage
WHAT YOU GET-Tacklife SML01 AC line splitter; user manual; 24 months warranty
Description
Product Description:Features
As one clamp meter necessary accessory to easy test the current or power cord
Easy connect with electricity outlet or plug provides temporary separation of conductors for current measurement with clamp-type meters
The line separator measure AC current up to 15 Amps and voltage up to 250V
Two openings on the line splitter, one provide the real status reading, the other one provide 10 times sensitive measurement make sure the small current can be checked with a clamp meter
Voltage check function, Adjust the multimeter's option to AC 600V, insert the multimeter's test leads into the line splitter's two voltage test jacks then the multimeter can read the voltage result easily
Specification
Compliance with safety standard: IEC61010
Max current load: 15A
Max AC current rate: 250V
Working environment: 0-40
Storage environment: 10-50
Dimension: 161*57*31mm (6.34*2.44*1.22inch)
Weight: Around 106g
Accessories: User manual
Notice
1. Careful check the productinsulation surface, make sure there is no broken place;
2. In case to avoid the electrocute happen or another dangerous issue arise, the load must less than 250 Voltage and 15 Ampere
3. Avoiding the insulation broken, never break the product outside cover
4. After testing, please first cut off the power source then remove the test lead and load plug
Package Contents
1* Tacklife MLS01 AC Line Splitter
1* User manual
1* Warranty card
1* 24 months warranty
3. Tekpower UT202A (Uni-Trend) Auto-ranging AC 600 Amp Clamp Meter with Tekpower Line Splitter M920
Feature
UT202A, Compact size AC clamp meter, up to 600 amps, a line splitter includedUT202A,AC/DC voltage, resistance, continuity & diode check
Data hold + Maximum value measurement
Carrying case included
30 days money back guarantee and 1 year limited warranty
Description
Why You Need wire splitter or line separator to measure the current ? The answer is : All the clamp meter can measure current on a single wire only, if you put the two wires in the clamp jaw, the reading will be zero, Only from one wire, you get a reading. This splitter virtually splits the wire and you clamp on the splitter around one wire.The TP202A(Uni-T UT202A) is an Auto/Manual range AC clamp meter, it can be used to measure AC/DC voltage and AC current. Also you can use it to measure resistance, continuity test & diode check. For your convenience, it comes with an essential piece of accessory needed for measuring AC current, a line splitter M920, which is retailed for $15.
Specifications:
Display: 1999 COUNTS
DCV : 200m/2/20/200 0.8% 600V 1.0%
ACV: 2/20/200 1.2% 600V 1.5%
ACA: 20A 2.0% 200A 1.5% 600A 2.0%
Resistance: 200 ohm 1.2% 2K/20K/200K ohm 1.0% 2M ohm 1.2%, 20M ohm 1.5%
Diode check
Continuity test
MAX. Diameter for conductor: 26 mm
Dimensions: 194 x 72 x 35 mm
Weight: APPROX. 200g (including battery)
Features:
Auto/manual range
Data hold
What's in the box:
202A clamp meter: 1
M920 line splitter: 1
Test leads: 1 pair
User manual: 1
Carrying pouch: 1
9V Battery: 1 (installed)
Lanyard: 1
Tekpower is a registered trademark in the United States, any unauthorized use of our trademark is a violation of both Federal and State trademark laws and could subject to liability for damages and penalties.
4. Extech MA445 True RMS 400 Amp AC/DC Clamp Meter with NCV with AC Line Splitter
Feature
True RMS feature for accurate readings regardless of waveforms1.2" (30mm) jaw size fits conductors up to 500MCM
Large backlit LCD display and built-in Flashlight
Allows clamp meter to measure AC current on a 2-wire or 3-wire power cord
Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground)
5. Line Splitter 10x Klein Tools 69409
Feature
Allows the measuring of current draw up to 15A without splitting the load's power cordFor use with all Klein clamp meters
Can be used to perform voltage checks with standard multimeter probes
Provides 10X measurement mode
For North American-style outlets only
Description
The Klein Tools 69409 Line Splitter separates hot from neutral and ground wires on standard 120-Volt outlets so that current measurements can be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement. The Line Splitter has a standard measurement section and ten-times multiplier section for use with less accurate or higher ranged clamp meters. It was designed for use with Klein Tools clamp meters but will also function with many other manufacturers' clamp meters. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.6. Tekpower M920 AC Line Splitter, Wire Separator
Feature
Separates the Positive & Neutral Conductors of the Power Cord When Measuring AC CurrentBuilt-in Receptacles for Voltage Testing
Provides Easy & Safe Measurement of Current while you can measure voltage at the same time.
Allows clamp meter to measure AC current on a 2-wire or 3-wire power cord, Direct measure or 10X Sensitivity
For Mearuring Current in Plug-In Appliances and Air Conditioners
Description
This AC Line Splitter provides a fast and easy way to "Split" standard 120V/240V AC electrical lines, eliminating the need to cut off the plug and separate the conductors.When you test a device, use this splitter to separates the hot/live conductor from the neutral and ground, which enables users to measure AC current - up to 15 amps on a two-wire or three-wire lines - using a clamp meter.
This splitter provides two openings - one opening provides one-to-one current measurements, and the other provides times-ten (X10) readings so that low-current readings will display with higher resolution on a clamp meter.
This splitter also provides two Voltage Test Jacks so that voltage can be measured with another multimeter while you are reading the current on the same line.
7. Mastech MS2101+M920 Digital Clamp Multimeter with Tekpower Line Splitter M920, AC/DC Both Current Measres Upto 1,000A, A Clamp on Meter with Frequency & Temperature Measurement
Feature
Measures AC/DC voltage, current, resistance, capacitance, frequency, diode check & continuity3 3/4 digit LCD Display with a maximum reading of 3999
With Tekpower Wire Splitter and Data hold & Zero adjustment
Professional Carrying case included
1-year manufacturer's warranty
Description
Made by Mastech OEM By Sinometer,it Measures Both AC and DC current up to 1000 Amp, it is a professional Meter that fit all electrical and electronic purpose. Plus it comes with a Line Splitter, M920 made by TekpowerSpecifications:
Max. LCD display: 3999
Range selection: manual
DC voltage: 0,4/4/40/400 V 0.8%, 1000 V 1.0%
AC voltage: 4/40/400 V 1.0%,700 V 1.2%
DC current: 400/1000 A 3.0%
AC current: 400/1000 A 3.0%
Resistance: 400/4k/40k/400k/4 M 1,0%,40 M 2.0%
Capacitance: 4n/40n/400n/4 F 4.0%
Frequency range: 40 Hz --100 kHz 2.0%
Temperature: -40 C -- 750 C 1.0%
Duty cycle:0.1% -- 99.9%
Diode test: yes
Continuity test: yes
Data hold: yes
Dimensions 10 x 4 x 1 inches
Power: 9V 6F22 battery
Weight: 1.06 lbs
What's in the box:
MS2101 clamp meter
9V battery
Test leads
Thermo probe
M920 Wire Line Splitter
User manual
8. Dawson Tools DZA50 AC Line Splitter
Feature
Easy & safe AC measurements with a clamp meter without the need to cut or separate conductorsVoltage check sockets for easy power calculations
Separates the hot/live conductor from the neutral and ground
Description
The DZA50 is an AC line splitter. Using this accessory with a clamp meter, you can make current measurements without the need to break the power cord and separate the conductors of a connected device.9. FLIR CM44 Professional 400A True RMS Clamp Meter with Accu-Tip and Temperature Measurement with AC Current Line Splitter
Feature
Accu-tip enables more accurate amperage measurements on smaller gauged wiresMax/min/Avg recording, frequency and diode measurement
Data hold, zero function, and low pass filter (VFD) for voltage measurement
Provides easy and safe measurements of current and voltage from two or three wire outlets
Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground) for accurate current measurement
Dual ranges (x1 and x10) for higher resolution on low-amperage readings
10. AC Line Splitter Direct and 10X Sensitivity - ST-74
Feature
For Measuring Current in Plug-In Appliances and Air ConditionersSplits Two Conductor Line Cord For Reading at Outlets Under Load
Permits Voltage Measurements at Outlet Under Active Conditions
Direct and 10X Sensitivity
Up to 120VAC and 15 Amps. Clamp meter shown is NOT included
