We spent many hours on research to finding nozzle e3d, reading product features, product specifications for this guide. For those of you who wish to the best nozzle e3d, you should not miss this article. nozzle e3d coming in a variety of types but also different price range. The following is the top 10 nozzle e3d by our suggestions:
Best nozzle e3d
1. Genuine E3D Hardened Steel Nozzle V6 (1.75mm) 0.40mm (V6-NOZZLE-HS-175-400)
Feature
Genuine E3D Parts1 - 0.40mm V6 Hardened Steel Nozzle per order
Hardened abrasion-resistant nozzles developed to last a lifetime
3D printing with abrasives such as carbon fiber, glow-in-the-dark PLA or even filled filaments like woodfill all take their toll on a standard nozzle
These nozzles will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers
Description
If you 3D print with carbon fibre, filled PLA, or glow-in-the-dark filament, then this is the nozzle you need! Carbon filled filaments cause rapid and significant damage to standard nozzles. We've developed these incredibly wear-resistant nozzles to deal with the toughest filaments on the market.
Benefits
Paying a little extra for a hardened, wear-resistant nozzle makes both practical and economic sense. By the time you've printed a single spool of abrasive filament you're saving money. It also saves a lot of time as you won't be constantly replacing worn out nozzles. And you'll be future-proofed for upcoming materials; we think these nozzles should be able to handle just about anything our material manufacturers think of next.
Appearance
Because of the thermal and chemical treatment applied to the nozzle they do have a bit of a dark, sometimes uneven looking coloration and surface finish, and there can be a small amount of residue on the nozzles despite our final cleaning process. The coloration variance is normal and doesn't affect function. Any residue left on the nozzle will quickly be flushed in the first few millimetres of extrusion, especially if you flush it out with an abrasive filled material!
Identification
All nozzles in the series are now individually identifiable with markings on the flats of the hex head making them even more convenient to work with.
2. E3D v6 Extra Nozzle Fun Pack 1.75mm (V6-NOZZLE-PACK-175)
Feature
Genuine E3D PartsA full collection of Brass E3D V6 Ecosystem nozzles
Suitable for all 1.75mm E3D Hotends except for Cyclops and Volcano
Hotends Sizes range from 0.25mm to 0.80mm (Check the description below)
Description
A full collection of E3D V6 Ecosystem nozzles, set into soft foam for protection. Print all the things in all the resolutions!
Suitable for all 1.75mm E3D Hotends except for Cyclops and Volcano. E3D has included the full range of nozzles for those who want to explore the limits of high resolution printing with small nozzles, as well high speed high layer height printing with large nozzles.
E3D has even included their purpose-made E3D Nozzle spanner to make changing out the nozzles a breeze!
This pack contains:
-0.25mm
-0.30mm
-0.35mm
-0.50mm
-0.60mm
-0.80mm
-E3D Nozzle Spanner
3. Genuine E3D Nozzle Pro Pack 1.75mm (V6-NOZZLE-PACK-PRO-175)
Feature
Genuine E3D Parts2 Brass, 2 Copper Alloy, and 2 Hardened Steel are feature in this kit (see product description for details)
These E3D V6 nozzles have an M6 thread
Compatible with the full V6 ecosystem and many other 3D printers, including the Prusa i3 Mk2
Description
This pack is the pinnacle of nozzle prowess, featuring six of our most exciting, useful and experimental nozzles. Brass, Copper Alloy, and Hardened Steel all feature in this kit, matched with the sizes we recommend for the most interesting use cases.
Not to mention, this pack means you get more than 10% off compared to buying separately, and includes a handy organisation and storage tin.
These E3D V6 nozzles have an M6 thread and are compatible with the full V6 ecosystem and many other 3D printers, including the Prusa i3 Mk2.
The 3mm & 1.75mm Nozzle Pro Packs contain:
Brass Nozzles:
0.15mm (experimental)
0.8mm
Nickel-Plated Copper Alloy
0.25mm
0.4mm
Hardened Steel
.4mm
0.6mm
4. Genuine E3D V6 Plated Copper Nozzle 1.75mm x 0.40mm (V6-NOZZLE-COP-175-400)
Feature
Genuine E3D PartsV6 Plated Copper Nozzles
Durable, non-stick, high temperature performance nozzles
This copper alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500C
These nozzles will fit V6, Lite6, and Titan Aero HotEnds, and are compatible with Prusa 3D printers
Description
These nozzles are engineered for ultimate high temperature performance. Made from a special high temperature copper-alloy with a softening point of well above 500C, and with much-increased thermal conductivity these copper nozzles are perfect for high temperature applications, while working perfectly with everyday filaments like PLA, ABS and spoolWorks EDGE.
In addition to high temperature performance these nozzles have an advanced nickel based plating, considerably reducing the adhesion of plastic to the nozzle. This is great for everyday filaments keeping things clean and shiny, but is particularly important at temperatures above 300C where a silicone sock can't be used.
Copper has more than 3x the thermal conductivity of brass, and the copper alloy we use has been hardened and treated to reduce the oxidation that occurs in copper at high temperatures. The higher thermal conductivity will also slightly increase your heat-up times, and can provide tighter temperature control.
This copper-alloy is very temperature resilient, and will not start to soften or anneal until way beyond 500C, making it perfect for the high-temperature printing that other nozzles can't handle.
5. Genuine E3D V6 Extra Nozzle - 1.75mm x 0.40mm (V6-NOZZLE-175-400)
Feature
Genuine E3D V6 replacement nozzle for 1.75mm filament at .4mm nozzle size.This premium quality E3D replacement nozzle allows you to truly customize each and every print.
This high quality nozzle have been created using community feedback and notes over multiple revisions from E3D
Description
This Genuine E3D V6 nozzle has been fully redesigned based on customer feedback. The nozzles have reduced back-pressure which allows exceptionally smooth and easy flow of filament while improving retractions. The smaller nozzles have a small nozzle tip which offers incredible precision. V6 Nozzles feature backwards compatibility, so they can be used to upgrade your V5 HotEnd. If you are using a V6 HeatBreak it is recommended that you use a V6 Nozzle. Each nozzle is carefully built to the highest quality.6. 3D Printer Nozzles + 4 DIY Tools for J-Head E3D V5 V6 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm Nozzle Tool for Nozzle Replacement, Spanner, Installation Tools
Feature
No more burnt fingers for you! This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!Multi-size High-precision extruder nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm
Compliant all M6 thread 3D printer: The nozzles used M6 thread, same as MK8 MK7 UM2 CR10 etc.
Special tools: special spanner and multi-function screwdriver can help you adjustment 3D Printer and change extruder nozzle more easy!
Note: Screwdriver maybe rust, but No effect on use. Spanner only fit for E3D heat block (20*16mm and 16*16mm)
Description
No more burnt fingers for me!This is a must have tool for changing print nozzles. Having the right tools makes all the difference in the world!
-------- Feedback by buyer
This is High-precision extruder nozzle produce by CNC.
High quality brass with M6 thread, compliant with all M6 thread 3D printer.
Special tools make you change extruder nozzle FAST, SAFE and EASY.
NOTICE: This spanner only for E3D heat blocks -(16*16mm & 20*16mm), it will not work with MK8 block (20*20mm)
HOW TO REPLACEMENT NOZZLE
Step 1:Turn on 3D Printer, set nozzle temperature to target (PLA: 80-220, ABS: 240-280).
Step 2:After heat done, use SPANNER to hold heat block, use Socket screwdriver to screw old nozzle out. old nozzle will be very hot, don't touch by hands!!!
Step 3:Put new nozzle to this socket screwdriver, spanner keep to hold heat block, screw nozzle in, must be tight and it is done.
Notice: NOZZLE and Heat Block on 3D printer need heat before take out, don't touch it by hands when printer is heading or close less than 10 mins.
Package include:
0.2mm extruder nozzle * 1pc
0.3mm extruder nozzle * 1pc
0.4mm extruder nozzle * 2pcs
0.5mm extruder nozzle * 1pc
0.6mm extruder nozzle * 1pc
0.8mm extruder nozzle * 1pc
Simple spanner * 1pc
3 in 1 screwdriver(1 Handle with 2 Heads) * 1pc
7. Genuine E3D V6 Extra Nozzle - 1.75mm x 0.60mm
Feature
High Quality BrassGenuine E3D part
Can handle most filaments as long as they are not abrasive
Fits all Genuine E3D V6 and V5 Hotends
Description
This Genuine E3D V6 nozzle has been fully redesigned based on customer feedback. The nozzles have reduced back-pressure which allows exceptionally smooth and easy flow of filament while improving retractions. This .6mm Nozzle has a slightly bigger opening then the standard nozzle which could mean increasing print speeds and increasing layer heights whcich is perfect for taller prints or prints that need less detail. This nozzle has a great balance of detail ability to print speed. V6 Nozzles feature backwards compatibility, so they can be used to upgrade your V5 HotEnd. If you are using a V6 HeatBreak it is recommended that you use a V6 Nozzle. Each nozzle is carefully built to the highest quality. Please be aware that software adjustments will have to be made before printing with this nozzle. Your slicer software has to know that the nozzle has an increased layer height. Please reference your slicers online manual and also reference the E3D wiki to verify everything is set correctly before printing.8. Genuine E3D V6 Socks Pro (Pack of 3) (V6-SOCK-PRO-3PACK)
Feature
Genuine E3D PartsONLY works for HotEnds which use the E3D V6 style heater block
3 Pack of original high temperature non-stick silicone socks for E3D V6 HotEnds
These socks will keep your nozzle clean
These socks really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles
Description
A pack of 3 original high temperature non-stick silicone socks for E3D V6 and other HotEnds also using the E3D V6 style heater block with thermistor cartridges.
Not sure about this design? E3D is confident that the new-style socks will suit almost all customers, but E3D kept this design available for specific use-cases. In particular, these socks may be preferable in set-ups where keeping the heater block AND nozzle fully insulated are desirable. We recommend using these socks with our 0.15mm nozzles.
These socks will keep your nozzle clean and free of burnt on blackened plastic. They don't just keep the nozzle clean, but also keep heat inside the hotend, and off the print.
Made of a heat-resistant, non-stick silicone material our will repel build-up of molten plastic. This really helps with sticky materials like Co-Polyesters and filled materials that like to build up on nozzles.
These also offer a huge boost in temperature stability, particularly if you use high airflow cooling around the nozzle to cool the print. The additional cooling combined with reduced radiation of heat from the block and nozzle to the print really boost the ability to print great overhangs and bridges, all while keeping the hotend temperature extremely stable.
The covers simply push onto the front of the hotend with no disassembly - they will be a tight fit when first pushed on cold. When hot the silicone will expand to the correct size to fit the hotend snugly. The elastic material will fit all nozzle sizes in the range from 0.25mm to 0.80mm.
These v6 socks are a pack of 3 because they don't last forever. Depending on what materials you print and how much abuse they get they eventually wear away at the nozzle tip. Even with sticky abrasive materials and a bit of abuse they should easily last 100+ print hours. With materials like ABS and gentler use you can get almost infinite life. Mileage may vary.
9. Micro-Swiss HW-NOZ-MODMK8-04 Plated Brass Wear Resistant Nozzles, 1.75 mm, RepRap - M6 (E3D/Hexagon) 0.4 mm, Bright Nickel
Feature
USA made Micro-Swiss Plated Brass Wear Resistant Nozzles extend nozzle life dramatically when using abrasive materials.Ultra-hard coating creates a low friction nozzle that outlasts uncoated brass. Brass base material retains thermal conductivity for unchanged thermal performance.
Fit a large variety of machines, check listing name carefully to make sure it fits your printer, or get in touch with us if you are unsure.
Description
Easy upgrade for trouble-free printing of hard composites! Our Plated Brass Wear Resistant Nozzles are made from brass for good thermal conductivity and plated with an extremely hard high lubricity coating. The coating increases the life of the nozzle significantly. We have yet to wear out a nozzle! With normal brass nozzles noticeable wear can occur after as little as 500g of Stainless Steel material.
Currently available in:
1. MK8 Style (M6 Threads compatible with most Makerbot style machines including the Replicator 1, 2, 2x, 5th gen, Mini & Z18) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
2. MK10 Style (M7 Threads for newer Flash-Forge, Dremel & Wanhao) in 0.4mm & 0.6mm diameter orifices - 1.75mm filament only.
3. Modified MK8 RepRap Style (M6 Threads compatible with E3D (including BigBox), Hexagon (newer Lulzbot & Robo3D) & Ultimakers upgraded with an Olsson block) for 1.75mm & 2.85mm filament diameter in 0.4mm, 0.6mm & 0.8mm diameter orifices.
4. Printrbot Ubis Style (for all Printrbots W/O all metal upgrade) in 0.4mm & 0.6mm diameter orifices (ignore 0.2mm marking...long story) - 1.75mm filament only.
5. Afinia/UP!/Zortrax Style in 0.4mm & 1.75mm filament only.
Larger diameters require more parameter modification, but have slightly more consistent extrusion & increased life over 0.4mm.
Custom manufactured for ProtoPlant, makers of Proto-pasta in the USA by Micro Swiss.
contact Proto-pasta for more information.
10. EAONE 10PCS M6 3D Printer Nozzle 0.4mm Brass Extruder Nozzle Print Head for E3D Makerbot
Feature
Material: brassDiameter: input: 1.75mm, output: 0.4mm
Installation: external M6 thread connection
Compatible: all 1.75mm PLA abs printer
Quantity: 10 pcs 0.4mm M6 3D Printer nozzles
Description
EAONE 10PCS M6 3D Printer Nozzle 0.4mm Brass Extruder Nozzle Print Head for E3D Makerbot
Specification
Type: extruder brass nozzle print head
Color: golden
Material: brass
Input diameter: 1.75mm
Output diameter: 0.4mm
Attention: small parts, keep away from children
package including:
10x 0.4mm Nozzle Print Head
