Shopping for the best fishing rod mounts for boat is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy fishing rod mounts for boat. Don’t worry any more! We spend many hours to review and compare fishing rod mounts for boat to make the short list for you. Let’s check which product is suitable with you.
Best fishing rod mounts for boat
1. ColdTuna Ultimate Rod Sitter - 10 Fishing Rod Storage Rack
Feature
Capacity: Secure up to 10 freshwater, saltwater, or fly-fishing rods with the reel still attached.Mounting Options: Overhead, Vertical, or Horizontal - capable of mounting to a ceiling or a wall, at any angle.
Maintenance Free: No corrosion here. Hot and Cold climates have no impact on these racks.
Module Design: Allows multiple units to be placed next to each other, keeping your rods in a linear formation and providing unlimited fishing rod storage capacity.
Quality: Solid - injection molded unit made of ABS plastic, 1/4" thick! The 90 degree bend at the top makes these racks very sturdy and allows it to be mounted to virtually any flat surface!
Description
Ultimate Rod Sitter ColdTuna's Ultimate Rod Sitter with Shock Cord Provides the Solution to Those Who Require Rod Storage in A Boat, Motor Home,Camper, RV, Trailer or Any Other Moving Vessel. These High Quality Rod Racks Feature a 3/16" Shock Cord Closure That Hold Your Rods In Place When Your Going To Your Next Fishing Destination. How It Works After mounting your rod rack, simply insert the rod butt into the hole, and the rod tip into the "T" shaped slot. When inserting into the "T" slot, you can either push your rod tip through the shock cord and into the rack, creating a secured hold on your rods, or remove the shock cord, insert your rods into the rack, and then re-secure the shock cord, creating a safety net in case your rods are bumped out of the rack. Benefits If you have too many rods to count, this is the perfect solution to get your sticks in order. The multiple mounting options allow you to place the Ultimate 10 Rod Sitter virtually anywhere. No more tripping over your rods, moving them all around the garage and wondering if the kids are going to bust a tip off your favorite stick. Instead, your rods will not only be safe and secure, but will be displayed nicely as well. Places To Mount Fishing boat, cabin cruiser, above garage door, on garage door, camper, RV, truck bed, tonnu cover, ceiling (overhead storage), wall (horizontal or vertical), closet ceiling, closet door.2. Bekith 2 Pack Adjustable Powerlock Rod Holder with Combo Mount, Black Finish
Feature
Set of 2, Includes combo mountRod holders are fully adjustable up and down and rotate 360 degrees
Spring loaded tension knob for quick rod adjustment.Stainless steel hardware make it stable
Multi-Positional Mounting. Locking Rod Ring.
Can be detached when you not using it
Description
Adjusts Vertically or Horizontally. Locking Ring. Fits all types of Rod Handles. Great Rod Holder Value. Faswin Heavy Duty Adjustable Rod Holder features a new ergonomic design and easy to find rapid release latch mechanism. The large, easy-grip lock-nut offers easy adjustment.This rod holder can be used with casting rods and spinning rods, and includes combo mount. Great for boat, canoe, and kayaks.3. Magma Products, T10-355 Fishing Rod Holder Grill Mount, All Angle Adjustable, LeveLock
Feature
Heat-treated 304 Stainless Steel and hard-anodized aluminum construction for superior corrosion resistanceQuick release cam-action design allows convenient all-angle adjustment when in use or simply folds flat for storage
1-1/2" diameter Stainless Steel tubing has 8 different rotation positions and fits most cross-pin type fishing rod holders
Designed for use with all Magma rectangular grills, single mount bait/filet tables, or tournament series cleaning stations
Description
Mount, Levelock Adjustable Fishing Rod Holder, "SM" Tables / "SM" Gourmet Series Grills4. (2x) Amarine-made Stainless Rail Mount Clamp on Fishing Rod Holder for Rails 1-1/4" to 2"
Feature
This product is a 100% brand new Amarine-made productCan be mounted to vertical or horizontal rails - Adjustable for rails 32mm (1-1/4") to 50mm (2") diam
Rubber insert to protect your fishing rod from any wear against the stainless surface
Rod holder can be adjusted to 32 different angles when mounted;Easy to install, mounting bracket includes bolts (allen key not included).
Drain holes at base of rod holder to drain any captured water
Description
Product DescriptionThis product is a 100% brand new Amarine-madeTM product
2 x high quality, marine grade 304 stainless steel rod holder with marine grade 316 Stainless steel clamp-on mounting bracket Tournament Style
Mirror finished stainless steel construction , for sleek appearance and to suit today's modern watercraft
Rubber insert to protect your fishing rod from any wear against the stainless surface
Can be mounted to vertical or horizontal rails - Adjustable for rails 32mm (1-1/4") to 40mm (2") diam.
Rod holder can be adjusted to 32 different angles when mounted
Easy to install, mounting bracket includes bolts (allen key not included)
Drain holes at base of rod holder to drain any captured water
Ideal for fishing boats with rails, where gunwale space may be limited
Specifications
2 x marine grade 304 stainless steel rod holder with marine grade 316 clamp-on bracket
5. (Set of 2) Amarine-made Heavy Duty Stainless Steel 316 Deluxe Rod Holders with Drain , Flush Mount Fishing Rod Pole Holders, 30 Degree
Feature
30 degree angle, Made of polished Stainless Steel 316Heavy Duty Stainless Steel 316 Deluxe Rod Holders with Drain ,30 Degree
The base of the rod holders close around a cast stainless steel drain tail. The closed-bottom with drain tail design allows for guided drainage to help protect the inside of your boat
These heavy duty rod holders are available in 15 degree, 30 degree, and 90 degree flange angles to allow proper mounting on the gunnel of your boat for the best rod angle.
high-quality, heavy-duty units with solid cast frames for superior corrosion resistance and durability
Description
Complete with interior liner and barb for a drain hose.30 degree angle.
2" outside diameter.
1 5/8" inside diameter.
9 inch length with stop pin.
Flange footprint is 4 1/4 x 3 3/8 inches.
Complete with interior liner and drain barb.
Highest-quality, solid cast 316 stainless steel.
6. Shaddock Fishing Power Lock Rod Holder with 2 Side Mounts Adjustable Boat Fishing Rod Racks (2PCS 04# Multi-Positional Mounting)
Feature
SHADDOCK Power Lock Rod Holder gives you versatility and convenience while out fishingSHADDOCK Power Lock Rod Holder is made of corrosion resistant, high impact plastic, gives rod holder long lasting durability
360ADJUSTABLE, Rod Holder makes it easy to access your rod and put it into the perfect position
The Durable and Stable Construction Can be Firmly Rail Mounted or Surfaced.
SHADDOCK Fishing Rod Holder is Perfect for Locking Your Rod in for Hands-Free Fishing
Description
SHADDOCK Power Lock Rod Holder relieves the tedious task of holding when fish are slow to bite.SHADDOCK Power Lock Rod Holders are Made of Anti-corrosion, Heavy Duty ABS Materials.
Spring loaded tension knob for quick rod adjustment.Stainless steel hardware make it stable.
Great for boat, canoe, kayaks etc.You Can Accommodate These Rod Holders to Spinning Pole, Casting Pole and Spincast Pole Handles
Multi-Positional Mounting, Locking Rod Ring
Can be detached when you not using it
Color: Black
7. Fishing Rod Holders for Boats 2 Pack with Large Clamp Opening 360 Degree Adjustable Fish Pole Racks Folding Holder
Feature
THE GOSPEL OF THE FISHING INDUSTRY: This is an amazing fishing tools, it suitable for kids, fishing beginner, fishing enthusiast who have several fish poles and someone who want to freedom your hand, CLAMP MAX.OPENING 4.7 inch. please kindly check your boat board size before buyingSUPER STRONG TOLERANCE: Holder are ultra strong and able to withstand a maximum tension up to 110 pounds. Now you don't need hold the rods on the hand any more, this fishing tackle does the job for you. Once you have our holder, you can do more than 10 poles at the same time
ECO-FRIENDLY MATERIAL & ANTI-CORROSION. This fishing rod holder is totally made of high quality and eco-friendly material--strong & anti-corrosion; Constructed with high impact resistant heavy duty ABS
UNIVERSAL FIT. Accommodates spinning, casting and spincast rod handles; Large clamp on opening can clamp to anywhere you want (Max.opening 4.7"). 360 degree adjustable. Can be surfaced or rail mounted. Great for boats or kayaks, includes stainless steel hardware.
Description
A fishing rod holder is a common piece of equipment for most fisherman. This holder with 4.7 inch opening and 360 degree adjustable, it's your great partner to fishing anywhere you want.
1. High Impact and corrosion resistance of ABS plastic with stainless steel metal rod able to withstand the impact stress which caused by the process of struggle with fish.
2. Depending on the side of the ship provide two installs designs, rod holder can rotate 360 degree and adjust up and down for you the best fishing angle.
3. The connection interface is the gear structure design, which is firmly support without slipping when you tighten screw, and control the speed of rotation.
4. Adjustable lock in front of the holder is helpful to placed and fixed fishing rod.
5. Base can fix the max width of the side of the boat is 4.7 inches, diameter of fishing rod tube is 1.5 inches, they are suitable for most of the ships and fishing rod.
8. Sea Dog 325038-1 Three Pole Side-Mount Rod Holder, White
Feature
Injection molded polypropyleneSold per each
Display packaged
Description
Three Pole Rod Holder is one piece, no assembly required. Built-in knife, pliers and lure holder. Sea-Dog Line is a 3rd generation family company with a history of satisfied customers stretching back to the company's start in 1933. The company is the recipient of multiple industry awards for quality and efficiency.9. X-Haibei 2pcs Clamp on Fishing Rod Holder | Marine Rail Mount Rod Holder for Boat Stainless Steel Clamp Fittings Rail 7/8" to 1"
Feature
* Clamp-on feature eliminates drilling rail and simplifies relocation,Simple installation,Mounts on vertical or horizontal rails.* Our clamp fits any rail between 7/8" OD to 1" OD.
* 9" tall tube with 1-5/8" ID O.D. tube: 2".
* Made from 304 stainless steel high polished stainless tube with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp.Angle from the rail adjusts in 15 degree increments.The clamp on rod holder has draining holes in the bottom.
* Black plastic liner that would normally scratch or mar the fishing rod surface.
Description
Durable, rust-free stainless steel constructionClamp-on system that adjusts to a range of rail thicknesses
Plastic liner prevents metal-on-metal contact with fishing gear
Rotates 360 and mounts to any rail angle
Heavy duty teeth keep the rod holders in place
Drain holes to prevent water build-up
10. Wise Twin Pack Rod Holder with 2 Side Mounts, Black
Feature
Constructed of High-Impact Co Polymer MaterialMulti-Positional Mounting
Locking Rod Ring
Hardware not Included
3 Year Warranty
