dc amp meter buyer’s guide for 2019

We spent many hours on research to finding dc amp meter, reading product features, product specifications for this guide. For those of you who wish to the best dc amp meter, you should not miss this article. dc amp meter coming in a variety of types but also different price range. The following is the top 10 dc amp meter by our suggestions:

Best dc amp meter

Product	Features	Editor's score	Go to site
	Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect		Go to amazon.com
	bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt		Go to amazon.com
	Multimeter, Tacklife CM01A Clamp Meter 4000 Counts Auto-Ranging Digital Tester with NCV, AC/DC Voltage, Current, Ohm, Continuity Electrical Tester, Diode, Resistance,Capacitance Meters		Go to amazon.com
	Uni-T B4Q094 UT210E True RMS AC/DC Current Mini Clamp M W Capacitance Tester		Go to amazon.com
	Fluke 325 Clamp Multimeter AC-DC TRMS		Go to amazon.com
	General Technologies Corp GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter		Go to amazon.com
	Mastech MS2115A True RMS DIGITAL DC/AC CLAMP METERS Multimeter Amp Voltage R HZ		Go to amazon.com
	Klein Tools CL800 Digital Clamp Meter, Autoranging TRMS, AC/DC Volt/Current, LoZ, Continuity, Frequency, Capacitance, NCVT, Temp, More 1000V		Go to amazon.com
	bayite DC 5-120V 100A Mini Digital Current Voltage Amp Meter Ammeter Gauge with Hall Effect Sensor Transformer		Go to amazon.com
	Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV		Go to amazon.com

Related posts:

1. Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect

Feature

MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.
WITH NCV & LIVE LINE TEST FUNCTION: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
CONTINUITY TEST & OVERLOAD PROTECTION: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
EASY TO USE AND READ: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
YOU WILL GET: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag

Description

Specifications:
Brand Name: Meterk
Material: ABS
Color: Orange
Safety Class: 600V CAT , pollution class RoHS CE FCC WEEE
Operating Altitude: 2000 meters
Temperature Coefficient: 0.1x accuracy/ (18 or 28)
Max. allowable voltage between terminals and earth ground: 600V DC or 600V AC True RMS
Sampling Speed: approx. 3 times / second
AC Current (A): 40A/400A (3.0%+6)
DC Current (A): 40A/400A (3.0%+6)
AC Voltage (V): 4V/40V/400V/600V (1.2%+10)
DC Voltage (V): 400mV/4V/40V/400V (0.8%+2), 600V (1.0%+2)
Resistance (): 400/4K/40K/400K/4M (0.8%+2), 40M (1.0%+2)
Capacitance (F): 40nF/400nF/4F/40F/100F (3.0%+10)
Hz: 50Hz-100KHz (1%+2)
Duty Ratio: 0.1-99.9% (3%+3)
NCV Test Pencil: 90V AC Voltage
General Characteristic
Display Count: 4000 (3 3/4 LCD)
Auto Range: YES
Max Clamp Opening Size: 26mm / 1.02in
Diode: Around 1.5V
NCV: YES
Diode/Continuity: YES
Frequency/Duty Cycle: YES
Data Hold: YES
Zero Mode: YES LCD Backlight: YES
Overload Indication: shows "OL" on the LCD
Auto Power Off: YES
Continuity Buzzer: YES
Low Battery Indication: YES
Input Protection: YES
Input Impedance for DCV: 10M

Power: AAA 1.5V x 3Included
Safety Rating: CE CAT.III600V RoHS CE FCC

Package List:
1 * Clamp Meter
2 * Test Lead
1 * Storage Bag
1 * User Manual(English + French + German + Italy + Spanish)

2. bayite DC 6.5-100V 0-100A LCD Display Digital Current Voltage Power Energy Meter Multimeter Ammeter Voltmeter with 100A Current Shunt

Feature

Voltage test range: DC 6.5~100V; Current test range: 0~100A
Store energy data when power off(can be reset to 0). The blue backlight can be turned on/off manually
With overload alarm function(If active power is larger than threshold, backlight and power will flash)
Large-screen LCD (display voltage, current, active power, energy at the same time)
Note: only display and shunt are included. It doesn't include any wire or accessories

Description

Main Specifications:

Working voltage: DC 6.5 ~ 100V
Measuring Accuracy: 1%
Power Consumption: 0.2W
Measurement speed: 2 times/s
Store Energy data when power off. Can be reset to 0.
The blue backlight can be turned on/off manually

Test Range and Display format:

1.Active Power test range: 0~10kW
2.Energy test range: 0~9999kWh
3.Voltage test range: DC 6.5~100V
4.Current test range: 0~ 100A

Precautions

1. This module is only suitable for 6.5~100V DC power.
2. Applied load should not exceed the rated power.
3. Wiring order cannot be wrong.
4. This module is suitable for indoor, please do not use outdoor.

Packing including:

1x DC 6.5-100V 100A Power Multimeter

3. Multimeter, Tacklife CM01A Clamp Meter 4000 Counts Auto-Ranging Digital Tester with NCV, AC/DC Voltage, Current, Ohm, Continuity Electrical Tester, Diode, Resistance,Capacitance Meters

Feature

BETTER CLAMP METER: Auto-ranging clamp meter measuring AC and DC Voltage, Current; Resistance, Diode, Continuity, Duty Cycle ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safely
NCV DETECTOR: If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Work is more convenient, devoting to using the great meter to improve your life quality
HUMANIZED MULTIMETER - With the backlight display to read and record easily under dark areas; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Devoting to optimize user experience, perfect for both professional or new users
USER-FRIENDLY TESTER: The "ZERO" key make for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Ergonomic design, better feeling of grasp to measure circuit; Made of high quality ABS, lightweight and portable
WAHT YOU GET: 1x Tacklife CM01A digital clamp meter, 2x Test Lead, 3x AAA Batteries, 1x user manual, 2 months warranty; Be assured of purchase Tacklife CM01A digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problems

Description

Tacklife CM01A Digital Clamp Meter is a portable, handheld professional meter has everything you need for a full multimeter.
It is designed according to IEC1010-1,IEC1010-2-030 and IEC1010-2-032 concerning safety requirements.
This clamp meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices.
(such as electronic equipment, automotive, domestic appliances, power supplies, and wiring systems. )

Tacklfie CM01A has the power to get the job done faster, safer, and easier.
- Jaw opening measures AC current in a conductor up to 26mm without interrupting the circuit
- NCV function to detect AC voltage, get rid of risk of electric shock
- Use the PTC protection circuit for Resistance
- Features Data Hold, Max Reading and an easy-to-read large LCD
- The operator can access measurement result in a dark place with the flashlight.
- The clamp multimeter includes a lightweight portable carry pouch for easy storage and handling.
- The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring.

Specification:
DC Voltage Range and Accuracy: 400mV/4V/40V/400V (0.8%+2), 600V (1.0%+2)
AC Voltage Range and Accuracy: 4V/40V/400V/600V (1.2%+10)
DC Current Range and Accuracy: 40A/400A (3.0%+6)
AC Current Range and Accuracy: 40A/400A (3.0%+6)
Resistance Range and Accuracy: 400/4K/40K/400K/4M (1.2%+2), 40M (2.0%+5)
Capacitance Range and Accuracy: 40nf/400nf/4uf/40uf/100uf (3.0%+1-0) Display: 4000 counts
MAX clamp opening size: 26mm
Sampling speed: approx. 3 times / second
Digital display: 3 3/4 LCD

Package:
1x Tacklife CM01A digital clamp meter,
2x Test Lead,
3x AAA Batteries,
1x User Manual,
24 Months Warranty.

4. Uni-T B4Q094 UT210E True RMS AC/DC Current Mini Clamp M W Capacitance Tester

Feature

Ultra-portable tools for advance electricians, true rms response for ac current
100A AC and DC current measurement with 1mA resolution, V.F.C function for measuring signal at varia
600V ac and dc voltage measurement, resistance, diode, continuity and capacitance functions
Non-contact voltage detection with led indication, display backlight
Data hold, max, min, max-min, and zero mode

Description

Specifications Display Count: 2000 Auto Range: Yes Jaw Capacity: 17mm True RMS: Yes Diode: Around 3.0V V.F.C.: Yes NCV: Yes Data Hold: Yes Zero Mode: Yes LCD Backlight: Yes Auto Power Of: Around 15 Minutes Continuity Buzzer: Yes Low Battery Indication: 2.5V Input Protection: Yes Input Impedance for DCV: 10M AC Current (A) 2A/20A/100A (2.5%+5) DC Current (A) 2A/20A/100A (2%+3) AC Voltage (V) 2V/20V200V/600V (1.0%+3) DC Voltage (V) 200mV/2V/20V200V/600V (0.7%+3) Resistance () 200/2K/20K/200K/2M/20M (1.0%+2) Capacitance (F) 2nF/20nF/200nF/2F/20F/200F/2mF/20mF(4%+5) General Characteristic Product Net Weight: 170g Product Size: 175mm * 60mm * 33.5mm Power: AAA 1.5V x 2 (Included) LCD Size: 39.3mm * 21.5 mm Package Size: 18.6 * 7.2 * 5.9cm / 7.3 * 2.8 * 2.3in Package Weight: 311g / 11oz Package List: 1 * UNI-T UT210E Mini Clamp Meters (Batteries not Included) 1 * Test Lead 1 * English Manual

5. Fluke 325 Clamp Multimeter AC-DC TRMS

Feature

Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohms
True RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
400 A AC and DC current measurement
Resistance measurement up to 40
Ac voltage make for the most accurate measurements on non-linear signals
Temperature and capacitance measurement
Frequency measurement

Description

The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The FLUKE-325 is ideally suited for current measurements up to 400 a in tight cable compartments.

6. General Technologies Corp GTC CM100 1 mA to 100 Amps AC/DC Low Current Clamp Meter

Feature

AC/DC current measurement from 0.001 up to 100 A. which makes it a great tool for measuring parasitic draws and AC/DC voltage measurement up to 600 volt
Small jaw: 1.2 inches (W) x 0.53 inches (D) (300x13.4millimeters) with clamp opening up to 1/2 inch (12.5 millimeters)
Peak and Data hold functions with one rotary switch operation
2 readings per second sampling and continuity check with audible indicator
Test leads soft carrying deluxe pouch and batteries included

Description

GTC 1 mA to 100 Amps AC/DC low current clamp meter is designed to accurately measure current, current leaks (parasitic draws down to 1mA) and electrical loads from 1mA to 100 amp AC/DC and voltages from 0 to 600 AC/DC. The small diameter ( inch or 13mm) and narrow jaw makes it ideal for use in confined spaces and on small gauge wires. Other features include resistance measurement functions, audible continuity test, display hold and peak detector.

7. Mastech MS2115A True RMS DIGITAL DC/AC CLAMP METERS Multimeter Amp Voltage R HZ

Feature

LCD with 5999 counts
Jaw size up to 40mm/1.6 inch
DC/AC current measurement up to 1000A
Tests AC/DC voltage and current, resistance, capacitance, frequency and duty cycle
Built-in Non-contact voltage detector

Description

AC voltage / current measurement True RMS; Data Hold; MAX/MIN value measurement; REL Test; Non-contact voltage detector function; Display Backlight / Flashlight / Work Light function; Low Battery Display; Inrush Current Test.
General
Brand MASTECH
Model MS2115A
Quantity 1Piece
Color Black + Green
Material Copper + iron + ABS
Specification
Screen Size 4.5 x 3.0cm
Max. Display 6000
DC Voltage 60mV/600mV/6V/60V/600V(0.7% +3) 1000V(0.8% +2)
AC Voltage 60mV / 600mV / 6V / 60V / 600V(0.8% +3) 750V(1% +4)
DC Current 60A / 600A / 1000A (2.5% + 6)
AC Current 60A / 600A / 1000A (2.5% + 6)
Resistance 600 / 6k / 60k / 600k / 6Mohm (0.8% +3) 60M ohm(1.2% + 3)
Capacitance Accuracy 10nF / 100nF / 1000nF / 10F / 100F / 1000F / 10mF / 100mF (4.0% + 5)
Frequency Accuracy Frequency (From Clamp) 0~10KHz (1.5% + 5); Frequency (AC Voltage) 0~10KHz (1.5% + 5); Logic Frequency 0~60MHz (0.5% + 3)
Transistor Test No
Temperature Test No
Frequency Test Yes
Power Consumption Test No
Short-Circuit Protection Yes
Short Curcuit Buzz Yes
Auto Power Off Yes
Powered By 6F22 9V battery
Battery Number 1
Battery included or not Yes
Other Features
Other Features Jaw Opening: 40mm/1.6"; Continuity Buzzer: <50; Duty Cycle:10%~90% 3.0%; Diode:2.7V
Certification CE; CAT.III 1000V CAT.IV 600V
Dimensions & Weight
Dimensions 9.37 in x 3.62 in x 1.97 in (23.8 cm x 9.2 cm x 5 cm)
Weight 26.1 oz (740 g)
Packing List
1 x Meter
1 x Test Probe
1 x English User Manual
1 x Pouch

8. Klein Tools CL800 Digital Clamp Meter, Autoranging TRMS, AC/DC Volt/Current, LoZ, Continuity, Frequency, Capacitance, NCVT, Temp, More 1000V

Feature

Automatically ranging true mean squared (TRMS) technology for increased accuracy
Test leads measure AC/DC voltage, resistance, continuity, frequency and capacitance and tests diodes
Thermocouple probe measures temperature
Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages
CAT IV 600V, CAT III 1000V, Class 2, Double insulation safety rating
Built to withstand a 6.6-Foot (2m) drop
Low battery indicator and easily accessible battery compartment
Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C)
Operating altitude to 6562-Foot (2000m)
Includes carrying pouch, test leads, thermocouple with adapter and batteries

Description

Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features. Built to withstand a 6.6-foot (2m) drop. Low battery indicator and easily accessible battery compartment. Operating temp: 32-degree F to 104-degree F (0-degree C to 40-degree C). Operating altitude to 6562-foot (2000m). Includes carrying pouch, test leads, thermocouple with adapter and batteries. Meets requirements for use in basic and controlled electromagnetic environments like residential, office and light-industrial locations. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.

9. bayite DC 5-120V 100A Mini Digital Current Voltage Amp Meter Ammeter Gauge with Hall Effect Sensor Transformer

Feature

Through-hole design: No wiring difficulty. Measure positive or negative current. No current direction limitation
Electrically isolated from high voltage power source which eliminates risk to delicate monitoring equipment and also minimizes safety concerns
Display Voltage or (+ -)Current. Voltage Range: 5V-120V. Current range: 0-100A
Large wire capability: Diameter of the hole through sensor is 3/4 inch(19 mm)
Loop through sensor multiple times to strengthen signal. For example, if your current signal is only 0.2 Amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 2.0 Amps

Description

bayite Hall effect current meter reads current by detecting the magnetic field around the wire, there is no electrical contact which eliminate risk to delicate monitoring equipment and also minimizes safety concerns. The sensor doesn't get hot like the current shunt sense resistor which can have thermal temperature heat dissipation issues.

Three display modes:
1, alternately display Amps and Voltage
2, only display Amps
3, only display Voltage

Specifications:
Measurement Range: + -100A
Accuracy: + - 1%
Resolution: 0.3A
Working current: 7-15mA
Power supply: DC 5-120V
Product Dimensions: 48mm*29mm*23mm
Mounting hole: 45.5mm*25.5mm
Sensor hole diameter: 19mm
Operating temperature: -4F - 140F (-20C - 60C)

As the resolution is 0.3A, the current reading might be flickering with 0.3A difference. For example, if the current is 1.7A, you might see a 1.7A and 2.0A alternatively. This is normal.
If your signal is too weak or you are not getting the resolution you want, you can coil the wire through the current sensor as many times as you want to double, triple, or quadruple the sensitivity or resolution.
For example, if your current signal is only 0.2 Amps, you could loop the wire through the sensor 10 times and the signal would by 10X stronger and would appear as 2.0 Amps.

10. Extech MA445 True RMS 400A AC/DC Clamp Meter with NCV

Feature

True RMS feature for accurate readings regardless of waveforms
1.2" (30mm) jaw size fits conductors up to 500MCM
Large backlit LCD display and built-in Flashlight
Functions include: NCV, AC/DC voltage, AC/DC current, resistance, Capacitance, Frequency, type-k temperature, Diode test, continuity
Relative mode for Capacitance, DC Zero and offset adjustment, data hold, max/min, auto power off and low battery indicator

Description

The MA445 is a 400A true RMS AC/DC clamp meter and NCV. Compact clamp meter with Type k temperature measurements. True RMS feature for accurate readings regardless of waveforms. 1.2" (30mm) jaw size fits conductors up to 500MCM. Cat III 600V safety rating. Ce and etl certified. Comes with test leads, three AAA batteries, general purpose Type k temperature probe and pouch.

Conclusion

All above are our suggestions for dc amp meter. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using dc amp meter with us by comment in this post. Thank you!