We spent many hours on research to finding condensate adapter, reading product features, product specifications for this guide. For those of you who wish to the best condensate adapter, you should not miss this article. condensate adapter coming in a variety of types but also different price range. The following is the top 9 condensate adapter by our suggestions:
Best condensate adapter
1. Watco Manufacturing SCH40CD-ABS 1.5-Inch Schedule 40 ABS Condensate Adaptor
FeatureThis adapter is designed for use with schedule 40 bath wastes
Bath waste with condensate adapter is part of the schedule 40 series
Type: tub and shower - style: waste and overflow
For use with 1.5-Inch schedule 40 ABS piping
Designed to simply glue into the overflow elbow
Also designed to glue into any 1.5-Inch schedule 40 ABS fitting
Easily configure the 0.75-Inch IP thread connection to the right, left, or back
Model number SCH40CD-ABS
DescriptionThe "watco system" - a family of quality bath waste products that results in lower total-installed, walkaway costs with a dramatic reduction of call-backs.
2. Multipurpose Air Gap Drain Line Adapter DLA-G20 For Residential & Commercial Water Treatment Equipment, Condensate Lines that Require an airgap Discharge to The Drain
Feature1" female thread inlet for versatility of MIPT Schedule-40 nipples and adapters
Installs onto 2" ABS or PVC Schedule-40 standpipes
Made from white ABS resin to ASTM specifications for 2" Schedule-40 fittings
Proprietary design prevents splash or spray from escaping through the airgap window
Accommodates high flow rate
Descriptionhe DLA-G20 multi-purpose standpipe airgap is designed for commercial water treatment equipment and condensate lines that require an airgap discharge to the drain. The DLA-G20 is perfect for applications where rigid Schedule-40 pipe must be plumbed to an approved airgap device. The DLA-G20 provides a convenient ready made true airgap for all Schedule-40 DWV standpipes.
3. A/C EasyTee Drain Line Adapter Tee
3/4" Slip Connections
Made in the U.S.A.
Replaces / Supersedes: ET75 , ET-75 Easy Tee , ET75KIT , ET75-KIT , 0095247154173 , 0095247154524 , 0095247154180
DescriptionTee, condensate drain cleanout
4. Little Giant 554210 VCC-20ULS 1/30 HP Low Profile Tank Condensate Removal Pump, 6' Power Cord,230V
FeatureIncludes A Secondary Safety Switch. 230 Volt. 6 Foot Power Cord.
Automatic start, stop and high level water detection (safety overflow switch)
Safety overflow float activated switch; Thermally protected, fan cooled motor
Built-in wall mount tabs; Intermittent liquid temperature up to 120 F
20' shut-off head; 3/8" O.D. barbed discharge adapter with built-in check valve (installed on the pump); 1/4" O.D. barbed discharge adapter (included in the box)
Low profile for limited spaces; Vertical centrifugal pump design
Two inlet openings (one 1.0" and one 1-1/8" diameter)
DescriptionLittle Giant -- Condensate Pump. Suitable For High-Efficiency, Gas Furnace Condensate. Pump Is Rated At 80 Gph. Shut-Off Is 20 Foot. Discharge Is 3/8" OD Barbed. Includes A Secondary Safety Switch. 230 Volt. 6 Foot Power Cord. If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST. If, after 30 days, you are having a problem with your Little Giant, Franklin, or Red Lion product, call the Franklin Electric Tech Support Team at 888-956-0000 for Troubleshooting and Warranty Instructions. The Tech Support Team is available M-F from 7:00am-4:30pm CST. Little Giant VCC-20ULS 1/30 HP Low Profile Tank Condensate Removal Pump, 6' Power Cord (554210) The Little Giant VCC-20ULS Automatic Condensate Removal Pump. The VCC Series is a low profile compact size for applications with limited space. The reservoir has a 3/10 gallon capacity. Pumps feature a vertical-type pump with stainless steel motor shaft, rust proof, high impact ABS tank and motor cover. Discharge is a 3/8" O.D. barbed tubing adapter/check valve. Pump features a safety switch that can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow. Pump is rated for high-efficiency gas furnace applications that produce an acidic condensate. Thermally protected motor is UL and CSA listed. The 554210 model has 230V, 50/60 HZ, 0.6 Amps Little Giant VCC-20ULS 1/30 HP Low Profile Tank Condensate Removal Pump, 6' Power Cord (554210) Features: Suitable for High-Efficiency, Gas-Furnace Condensate Vertical type pump unit Leakproof, rustproof, ABS plastic tank ABS motor & tank cover, and volute Polypropylene Impeller Galvanized steel tank cover and ABS plastic switch cover on VCL Series Stainless steel shaft Snap-action switch 3/8" OD barbed discharge, unless otherwise described 6' (1.8m) power cord with 3-prong molded plug Thermal overload protection Little Giant VCC-20ULS 1/30 HP Low Profile Tank Condensate Removal Pump, 6' Power Cord (554210) Specifications: Horsepower 1/30 Flow 80 GPH (4.9 LPM) @ 1' of Head Cord Length 6' (1.8m) Shut Off 17 Voltage 230 Hertz 50/60 Amps .6/.5 Watts 75 Weight 5.6 Height 5 Width 5 Length 12.
5. Watco Manufacturing SCH40CD-ABS 1.5-Inch Schedule 40 ABS Condensate Adaptor by Watco Manufacturing
FeatureWatco Manufacturing SCH40CD-ABS 1.5-Inch Schedule 40 ABS Condensate Adaptor
DescriptionThis adapter is designed for use with schedule 40 bath wastes;Bath waste with condensate adapter is part of the schedule 40 series;Type: tub and shower - style: waste and overflow;For use with 1.5-Inch schedule 40 ABS piping;Designed to simply glue into the overflow elbow;Also designed to glue into any 1.5-Inch schedule 40 ABS fitting;Easily configure the 0.75-Inch IP thread connection to the right, left, or back;Model number SCH40CD-ABS
6. Uniweld 40022 Rubber Plug Adaptor, 3/4-Inch
FeatureRubber Plug Adaptor, 3/4" x 7/8" Tapered Cone with 1/4" Male Flare Fitting
Blow out copper lines, aluminum tubing, hoses and condensate drain line with the use of Nitrogen, Air, CO2 or water
Attaches to Uniweld Part No H2SSM 2 Ft Service Hose or Part No H5SMY 5 Ft Service Hose
DescriptionUniweld 40022 Rubber Plug Adaptor, 3/4-Inch x 7/8-Inch Tapered Cone with 1/4-Inch Male Flare Fitting Rubber Plug Adaptor has a 3/4-Inch x 7/8-Inch tapered cone with 1/4-Inch Male Flare fitting and is used to clean out a condensate drain line. Attach Uniweld Part# H2SSM or Part# H5SMBY Service Hose with 1/4-Inch Female Flare hose nuts to Rubber Plug Adaptor and with the use of Nitrogen, Air, CO2 or water flush clean.
7. Little Giant VCMX-20ULS 1/30 HP Automatic Condensate Removal Pump | 554530 (5 Pack)
Feature84 GPH automatic condensate removal pump
3/8 inch O.D. barbed discharge adapter with built in check valve
3 1/8 inch diameter inlet openings (2 fitted with removable cap plug)
Recessed tank sump
Oil resistant tank and check valve
DescriptionFlip on the Little Giant VCMX 20ULS 1/30 HP Automatic Condensate Pump and watch it automatically collect condensate from your air conditioning, refrigeration, and dehumidification equipment. You'll be glad you have it when draining via gravity just won't do. The condensate pump has 84 GPH of power and empties the moisture into oil resistant tank. The thermally protected, fan cooled motor keeps the water at a maximum water temperature of 140 degrees Fahrenheit. The Little GiantVCMX 20ULS 1/30 HP Automatic Condensate Pump is also good for high efficiency oil and gas fired condensing furnace and condensing boiler equipment.
8. Tripp Lite SRCOOL12K 12K BTU (3.5 kW) Portable Cooling Unit Air Conditioner, Stand Alone Spot Air Cooler, 120V 5-15P Plug
FeatureProvides supplemental, emergency and off-hour cooling in IT and other applications
Compact and portable - ideal for wiring closets and other space-critical locations
Requires no floor drain or water collection tank and offers 12,000 BTU of cooling power
Standard louvered vent for general room cooling and ducted vent to direct cold air where needed
Features top-mounted control panel with LCD temperature readout and LEDs
12,000 BTU of cooling power can cool a 500 square foot room
Uses R410a refrigerant (Contains no ozone depleting R22 refrigerant which has been banned by the U.S. EPA in new equipment after January 1, 2010)
No water collection tank required. A built-in evaporator expels condensate into the exhaust air stream meaning no drain tube, drain pan or water collection tank that needs to be emptied every few hours
Cold air output can be precisely directed through a 71" flexible tube to the 'hot spot' for better, faster cooling. (Standard louvered insert is also included for general room cooling)
Auto-restart feature retains all system settings and returns the unit back to its last operational state after AC power is restored
Compact, portable, self-contained design; ideal for IT, industrial, commercial and similar applications
Quick and easy installation. Plugs into a standard 5-15R outlet; no adapter required
Window/drop ceiling installation kit is included for extracting heat
The SRCOOL12K SmartRack 12,000 BTU 120V Portable Air Conditioning Unit pumps 12,000 BTU of cooling power into your IT environment to prevent shutdowns, malfunctions and failures caused by overheating or fluctuating temperatures. Part of the SRCOOL line, this compact, portable unit is perfect for server rooms and other IT environments with heat-sensitive equipment in areas that facility air conditioning cant reach.
The self-contained SRCOOL12K is capable of cooling a small room using its louvered vent. A built-in evaporator expels the condensed water through the directional exhaust duct, eliminating the need for a drain tube, drain pan or water collection tank.
You can also use the included flexible tube to aim the cold air precisely where its needed most, such as an overheated rack enclosure or an equipment hot spot. The SRCOOL12K also dehumidifies and filters the air, providing better air quality that can enhance equipment performance with little power consumption.
Designed for quick, simple installation, the SRCOOL12K rolls into place on durable built-in casters and plugs into a standard 15-amp outlet. Its programmed to restart automatically after power failures, and you can set the built-in timer for unattended shutdown and startup.
By installing the optional SRCOOLNET remote management accessory(sold separately), you can also monitor temperatures, receive alerts, review logs and control settings from anywhere via SNMP, web browser, SSH or telnet.
1-Year Limited Warranty
9. CareFusion AirLife Valved Tee Adapter, 22mm ID x 22mm OD, Latex-Free