Finding your suitable outboard motor rail mounting bracket is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best outboard motor rail mounting bracket including detail information and customer reviews. Let’s find out which is your favorite one.
Best outboard motor rail mounting bracket
1. BroCraft Rail Mount Outboard Motor Bracket / Engine Bracket For Boat
Feature
Designed to hold small outboards up to 8 HP- 2 cycle upright on the stern railinjection molded Nylon polypropylene rail mount outboard bracket
.It fits rails up to 1" and includes stainless steel mounting bolts.
It can also be used as a mounting platform for barbecues, downrigger brackets, fish cleaning tables, etc
Description
Designed to hold small outboards up to 8 HP- 2 cycle upright on the stern rail2. Sea-Dog Line Rail Mount Motor Brackets, rail mount poly motor bracket white
Description
RAIL MOUNT MOTOR BRACKET- Injection Molded Polypropylene.Designed to hold small outboards up to 8 HP- 2 cycle upright on the stern rail. These Sea-Dog Motor Brackets will fit both 7/8" and 1" rails as well as rails using 90 tee fittings. Most other polypropylene and wood motor brackets only fit 1" welded rails. The two piece unit is made of UV stabilized polypropylene and comes complete with fasteners. Extra holes enable the use of a recommended safety chain to secure the motor. It can also be used as a mounting platform for barbecues, downrigger brackets, fish cleaning tables, etc.3. Five Oceans Rail-Mount Outboard Bracket - BC 1586
Feature
Designed to hold small outboards up to 8 HP- 2 cycle upright on the stern railMaximum Weight: 4-Strokes to 100lb.
Material: UV-stabilized polypropylene
Attachment Method: Clamps onto 1" rail T
Attachment Hardware: Stainless steel fasteners included
Description
Rail-Mount outboard bracket should be kept safe and upright on the stern
rail, rather than stuffed in a locker where hazardous fumes could collect, or
spill and ruin stored goods. Includes two-piece mounting blocks clamp around a 1"OD rail "T" and
hold outboards up to 8hp. UV-stabilized polypropylene. 10 1/2" square.
Specification:
Part #: FO1586
Recommended Usage: Storage for dinghy outboards
Maximum Weight: 4-Strokes to 100lb.
Style: Fixed
Material: UV-stabilized polypropylene
Attachment Method: Clamps onto 1" rail T
Attachment Hardware: Stainless steel fasteners included
PRODUCT NUMBER: 1586
4. Garelick/Eez-In 71090:01 Aluminum Auxiliary Motor Bracket for 4 Stroke Motors
Feature
Raise And Lower Trolling And Auxiliary Motors On Power And Sailboats With EaseBuilt Especially For New 4 Stroke, Heavier, High Torque Motors
Extra Wide 11-1/2" (29 Cm) Black Poly Mounting Locking Clamps Used On Late Model Outboard Motors
Accommodates Long Or Short Shaft Motors
Motor safety cable included for added protection
Description
4 Stroke Motor Bracket H.P. Rating: Over 7-1/2 to 30 Motor Weight Not To Exceed: 169 lbs. Vertical Travel: 9-1/2" (24 cm) Mtg. Plate: Poly Mtg. Board Dimension W x H x T: 11-1/2" x 10-3/4" x 2"5. Garelick/Eez-In 71074:01 Stationary Outboard Motor Bracket - Vertical Transom Mount
Feature
Fixed Height For Auxiliary Or Trolling Motor & 2 Stroke304 Stainless Brackets And Hardware
1 1/2" (4Cm) Black Poly Mounting Board
For Motors Up To 15 H.P
Motor weight up to 75 lbs
Description
Garelick/Eez-In has been a leader in marine innovation for over 60 years. As a company, it prides itself on offering quality products backed by integrity, innovation and service.6. Panther 55-0407AL Aluminum Lightweight 4-Stroke Bracket
Feature
Marine Tech 550407AL, PAN550407ALDescription
Adjustable outboard motor bracket works with 4-stroke motors up to 15 horsepower or 2-stroke up to 20 horsepower, maximum weight of 132 pounds. This black, hard-coat anodized aluminum bracket is built to handle the increased torque output of today's four stroke engines. Twist-knob safety locks provide increased torque rating while helping secure bracket in place. Motor's weight is counterbalanced by heavy-duty stainless steel torsion springs for easy lifting. Boasts a 2 inch thick, extra-wide, weatherproof and maintenance-free polypropylene mounting board along with aircraft-type stainless steel hardware. Four-position lock bar and 10 inch of travel allows for better range of trim adjustment letting you fine tune motor height for optimal performance. Rated for long or short shaft engines.7. Outboard Mounting Bracket
Feature
6-5/8in W x 6-7/8in H x 1-1/2in thickFor motors up to 12 horsepower only
Fits 7/8in or 1in railings
Made of solid teak
Description
Teak is one of the world's most desired hardwoods. Its naturally high oil content makes it incredibly durable. Teak resists warping, rotting, termites and other insects. Teak will last for decades. Teak can withstand the most extreme weather conditions including salt, sun, snow and rain. Because of teak's unique properties it has been the choice of mariners for centuries. Not only is teak durable, it's beautiful to see and touch. Its intricate grain patterns and color variations make each piece unique unto it's self. There are no other hardwoods that can match the soft, warm, silky feel of teak that comes from the rich oil contained in the wood. When teak is exposed to the year-round outdoor climate it will, over time mature to a silvery grey color. To preserve the rich golden finish and enhance the grain apply golden teak oil/sealer annually. Teak can be left out in the weather all year long. Whitecap teak products are made from kiln dried, fully aged teak wood. To ensure strength and durability, each of our handcrafted products uses traditional assembly techniques, such as dovetail and mortise & tenon joints. All screw fittings are countersunk and plugged. Only high-quality waterproof adhesive is used. Each item is sanded and finished by hand to a rich elegant luster. No other species or origins of wood are used in our products. All our products are made of solid teak.8. Stainless Steel Outboard Auxiliary Motor Bracket- 20hp
Feature
Stainless steel, spring loaded 4 vertical position) adjustable bracketSolid polypropylene mounting board, Wide track body for added stability
Easy to lift and lower - Stainless springs help counterbalance motor weight
Heavy duty with reinforced welded frame and stamped stainless components
Suits 2-stroke motors 7 1/2 - 20 HP, with a maximum weight of 52kg (115lbs)
Description
SpecificationsFor 2-stroke motors 7 1/2 - 20 HP
Material: Stainless steel construction, solid polypropylene mounting board Board area: 270 x 210mm (10 1/2" x 8 1/4")
Mount area on boat: 205 x 220mm (8" x 8 5/8")
Mount holes: 8mm
Lift range: 285mm/11.25"
Mounting holes have a horizontal distance of 170mm across (centre to centre), and multiple vertical distances of 100mm, 130mm, or 160mm(centre to centre)
9. Garelick/Eez-In 71078:01 Stationary Outboard Motor Bracket - Horizontal Platform Mount
Feature
Fixed Height For Auxiliary Or Trolling Motor &Ndash; 2 StrokeComes in a 4 piece set
Pedestal System Stowable
Motor Weight Up To 75 Lbs. 15 H.P
304 Stainless brackets and Hardware
1 1/2" (4cm) Black Poly Mounting Board 8" (20cm) width
Motor weight up to 75 lbs. 15 H.P.
Description
Horizontal Platform Mount. Made in the USA.10. X-Haibei Outboard Motor Bracket Auxilary Up To 20HP Marine Boat Stainless Steel
Feature
Quanity: 1Hp Rating : to 20 hp
Mounting Size: 8inchx 8.625inch(Please look at the images for more detail sizes.)
Roller Size: 8.25*10.375inches
Base Material: Plastic
Description
Transom mount locks and holds the outboard motor up or lowers the motor down for propulsion.The completed installation should result in the cavitation plate of the outboard motor being parallel to the surface of the water. The height of the outboard bracket on power boats should be localted so that the cavitation plate is nearly flush with the bottome of the boat immediately forward of the engine being mounted.