What are criterias of the best d-ring backing plate? It is not easy to find the answer. We spent many hours to analyst top 10 d-ring backing plate and find the best one for you. Let’s find more detail below.
Best d-ring backing plate
![Pit Posse Cargo Trailer Recessed Pan D Ring Floor Rope Anchor Tie Down 6,000 Lbs. Breaking Strength 4 Mountings Points with Washers and Mounting Hardware[4 Pack]](https://m.media-amazon.com/images/I/41Rhh19yjtL.jpg)
1. Recessed D-Ring 6,000 lb. Cap. Tiedown w/ Backing Plate - 6 pack
Feature
6 complete sets of D-rings and backing plates. Both components are zinc coated to inhibit rust and corrosion. The d-rings have square holes punched for receiving carriage bolts, providing a smooth and relatively trip free surface. When in use the ring portion raises for application and lies down when not in use, thus creating a flush surface. It is plenty strong and is able to receive multiple tie-down straps simultaneously.Each D-ring has a 6,000 lb straight pull capacity. RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is NEW. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.
SPECIFICATIONS of d-ring: 1) The base measures 5" x 4-1/2". 2) Hole pattern is 3" x 3-1/2" on centers. Recessed dimension is 3" diameter with a flat edge. 3) The 7/16" diameter ring measures 1-3/4 center. 4) The ring pivots on a 5/16" threaded stud. 5) The pan has a 1/4" drainage hole.
BACKING PLATE is used for support under the floor when installing the tiedown attachments, and prevents the bolts from pulling through. SPECIFICATIONS: 1) The backing plate measures 6-1/2" x 6-1/2". 2) Thickness is 11 gauge (a little thinner than 1/8). 3/8" holes. 3) 3-1/2" diameter cutout. 4) Steel backing plate is zinc coated to inhibit corrosion.
INSTALLATION - these D-rings require routing, or cutting a hole in the floor. We recommend creating/cutting a template and then transferring to the desired location. If you use a 3" hole saw, the d-ring will fit without any further work. Better fit - use a 2-1/2 hole saw then jigsaw the flat edge and then bevel the edge with a wood hasp to create a snug fit.
2. Mac's Tie Downs 472006 Steel Backing Plate for Swivel D-Ring
Feature
Mac's Custom Tie-Downs 472006 Backing Plate for Swivel D-RingsProduct Dimension (LxWxH): 11.05x13x.35
3. Pit Posse Cargo Trailer Recessed Pan D Ring Floor Rope Anchor Tie Down 6,000 Lbs. Breaking Strength 4 Mountings Points with Washers and Mounting Hardware[4 Pack]
Feature
Kit includes 4 recessed pan ring plates, 4 backing plates (1/8 inch steel oversized) , and 4 hardware sets made up of 16 carriage bolts, 16 lock washers and 16 nuts.Made of heavy-duty steel with a breaking point of 6,000 lbs
Simple installation allows you to secure your belongings in minutes
Keeps your motorcycle from tipping over and your gear from moving around
When not in use the D-rings lay flat in their pockets without getting in the way
4. Four Recessed D Ring Cargo Tiedown Anchors w/Mounting Lock Plates & Installation Tie Down Hardware Accessories, Flush Mount Bolts, Hex Nuts, Flat Washers | Square Galvanized Steel
Feature
THIS IS THE COMPLETE INSTALLATION BUNDLE. When you need to safely transport your motorcycle, snowmobile, landscaping equipment, farm tools, and other gear, these large recessed tie down anchor d rings are the absolute elite in superior tiedown anchors; they are a cinch to install and offer a lifetime of dependable strength and versatility, and the mounting plates offer incredible support and backing to these trailer tie down anchors!CLICK ON THE IMAGES FOR A DETAILED SKETCH showing all dimensions of these D ring pan fitting tiedowns and backplates. This kit includes 1/10" thick black steel trailer backplates plus 4 square 4-3/4" x 4-1/2" recessed pan fitting D-ring trailer tie down anchors, made out of galvanized steel that ensures superior strength and corrosion- and rust-resistance with assembly break strength of 6,000 pounds and a safe working load limit of 2,000 pounds
USE A HOLE SAW AND/OR CHISEL TO INSTALL these durable cargo tie-down anchors; the 13/32" diameter countersunk bolting holes are perfect for securing with the provided grade A ASTM a07 2.5" long 1/4" diameter carriage head bolts, hex nuts, 3/32" flat washers; the weep holes on the bottom of the pans ensure that water drains out
THESE TIE-DOWNS CAN BE USED IN SO MANY CUSTOM WAYS! Easily anchor logistic tie downs, S hook or J hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on pickup truck beds, utility trailers, flatbeds, in enclosed trailers, boats, and vans by inserting the hook ends or strap webbing through the 1 1/2" x 1 1/2" (inner clearance) D rings on these recessed pan fittings
This product includes 4 RECESSED D RING ANCHORS WITH COMPATIBLE LOCK PLATES AND BOLTING HARDWARE; if you have any QUESTIONS, COMMENTS, OR INTEREST IN BULK/CUSTOM ORDERS, our US-based customer service representatives are ALWAYS HAPPY TO ASSIST, and we stand behind our products with a CONFIDENT 100% MONEY-BACK HAPPINESS GUARANTEE!
5. Four Recessed D-Ring Pan Fittings | Small Square Tie-Down D Ring Trailer Cargo Tiedown Anchors + Mounting Lock Plates + Installation Tie Down Hardware Parts, Bolts, Nuts, Washers
Feature
This is the COMPLETE INSTALLATION BUNDLE! When you need to safely transport your motorcycle, snowmobile, landscaping equipment, farm tools, and other gear, THESE HEAVY DUTY RECESSED TIE DOWN ANCHOR D RINGS ARE THE ABSOLUTE ELITE IN SUPERIOR TIEDOWN ANCHORS; they are a cinch to install and offer A LIFETIME OF DEPENDABLE STRENGTH AND VERSATILITY, and the MOUNTING PLATES OFFER INCREDIBLE SUPPORT and backing to these trailer tiedown anchors!Click images to see DETAILED SKETCHES SHOWING DIMENSIONS of D ring pan fitting tiedowns & backplates; kit includes 4 square 4" x 3-3/4" recessed pan fitting D-RING TRAILER TIE DOWN ANCHORS, made out of silver GALVANIZED STEEL THAT ENSURES SUPERIOR STRENGTH and corrosion- and rust-resistance, assembly break strength of 3,498 pounds, a SAFE WORKING LOAD LIMIT of 1,166 pounds; 1/10" thick BLACK STEEL trailer plates
SIMPLE 6-STEP INSTALLATION guide! Use a hole saw and chisel to install these DURABLE CARGO TIE-DOWN ANCHORS; the 13/32" diameter countersunk bolting holes are perfect for securing with the PROVIDED flush bolts, hex nuts, 3/32" flat washers
These tie-downs can be used in so many custom ways! EASILY ANCHOR LOGISTIC TIE DOWNS, S hook or J hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on pickup TRUCK BEDS, UTILITY TRAILERS, FLATBEDS, IN ENCLOSED TRAILERS, BOATS, AND VANS by inserting the hook ends or strap webbing through the 1 3/8" x 1 3/8" (inner clearance) D rings on these recessed pan fittings
This product includes 4 RECESSED D RING ANCHORS WITH COMPATIBLE LOCK PLATES AND BOLTING HARDWARE; if you have any QUESTIONS, COMMENTS, OR INTEREST IN BULK/CUSTOM ORDERS, our customer service representatives are ALWAYS HAPPY TO ASSIST, and we stand behind our products with a CONFIDENT 100% MONEY-BACK HAPPINESS GUARANTEE!
6. DC Cargo Mall 4-Pack Black Trailer Mounting Backplates for D Ring Tie-Down Square Recessed Pan Fitting Bolt-on Installation
Feature
NOTE: recessed tie-downs and mounting hardware is sold separately on Amazon or as a bundle kit but is NOT included in THIS product.When you need to safely transport your motorcycle, snowmobile, landscaping equipment, farm tools, etc, HEAVY DUTY SQUARE RECESSED TIE DOWN ANCHOR D RINGS are the absolute elite in superior tiedowns; fairly simple to install, offer A LIFETIME OF DEPENDABLE STRENGTH AND VERSATILITY and MOUNTING PLATES OFFER INCREDIBLE SUPPORT, backing to trailer tiedown anchors!
THIS KIT INCLUDES 4 TRAILER MOUNTING BACKPLATES THAT ARE COMPATIBLE with small and large square recessed D-ring tie-downs with countersunk or square carriage holes (DC Cargo Mall parts # PF21, PF22, and PF23). These 6.5" x 6.5" tie-down support plates are made out of DURABLE BLACK STEEL that is 1/10" thick and each backplate has a 3.5" diameter open circle through which the tie downs should be inserted; SEE THE TECHNICAL SKETCH IMAGE ON THE LEFT FOR A VISUAL GUIDE to this products dimensions
Place a backplate over the area where you wish to install your recessed tie-down and draw diagonal lines from hole to hole to achieve that perfect center spot; then use a hole saw and chisel to create the correct size pocket (be careful to measure the Dring pan fitting tie down carefully and look at the technical sketches), with a depth that advances from 9/16" deep to 1-1/8" deep because the recessed pan fittings are deeper on one side
Once youve created the hole needed to insert a RECESSED D RING TIE-DOWN, put the pan fitting in its place and drill through the bolting holes; then hold A MOUNTING PLATE ON THE UNDERSIDE OF THE MOUNTING SURFACE (YOUR TRAILER, TRUCK BED, OR TABLE) and insert the appropriate bolts into the 4 holes, securing with lock nuts and washers
This product includes 4 D ring backplate supports for installation on trucks or trailers; if you have any QUESTIONS, COMMENTS, OR INTEREST IN BULK/CUSTOM ORDERS, our customer service representatives are ALWAYS HAPPY TO ASSIST and we stand behind our products with a CONFIDENT 100% MONEY-BACK HAPPINESS GUARANTEE!
7. Four Recessed Tie-Down D Rings, Square Trailer Cargo Tiedown Anchors, Mounting Lock Plate + Installation Bolting Hardware Accessories - Carriage Bolts, Hex Nuts, Flat Washers
Feature
This is the Complete Installation Bundle. When you need to safely transport your motorcycle, snowmobile, landscaping equipment, farm tools, and other gear, these large recessed tie down anchor D rings are the absolute elite in superior tiedown anchors; they are easy to install and offer lifetime strength and versatility; the mounting plates offer incredible support to these trailer tiedown anchors, spreading the load over a larger area!See images for a DETAILED SKETCH + HOW-TO showing all DIMENSIONS + INSTRUCTIONS of these D ring pan fitting tiedowns and backplates; bundle includes 4 square 4-3/4" x 4-1/2" galvanized steel recessed pan fitting D-ring trailer tie down anchors with holes on the bottom of the pans that ensure water weeps out (assembly break strength of 6,000 pounds and a safe working load limit of 2,000 pounds), + 1/10" thick black steel trailer plates + bolting hardware
Square 1/2" x 1/2" diameter bolting holes are perfect for securing with the PROVIDED Grade A ASTM A307 2.5" long 3/8" diameter carriage head bolts, hex nuts, 3/32" flat washers
These tie-downs can be used in so many custom ways! Easily anchor logistic tie downs, S hook or J hook ratchet and cam straps, tarp straps, bungee cords, motorcycle tie-downs, clevis grab hook chains, ropes, and nylon soft loops on pickup truck beds, utility trailers, flatbeds, in enclosed trailers, boats, and vans by inserting the hook ends or strap webbing through the 1 1/2" x 1 1/2" (inner clearance) D rings on these recessed pan fittings
This product includes 4 recessed D ring anchors + compatible lock plates + bolting hardware. If you have any questions, comments, or interest in bulk/custom orders, our USA-based customer service representatives are always happy to assist and we stand behind our products with a CONFIDENT 100% MONEY-BACK HAPPINESS GUARANTEE!
8. 4) Backing Plate Mounting Plates for D Ring Plate Tie Down Recessed
Feature
4 Red Hound Auto Heavy Duty Recessed D Ring Backing PlatesD Ring Backing Plate is 5-5/8" x 5-1/4" and 1/8" thick (with 3.5" center hole diameter, and 3" and 3-1/4" center to center bolt hole spacing);
Solid backing plate for rigidity and strength; great for securing equipment, cargo and other loads
Zinc coated for indoor/outdoor protection
Heavy duty steel with weather and corrosion resistant zinc plating
9. ARIES 2081300 Heavy-Duty Tow Hooks Anti-Rattle D-Ring Shackles, 9,000 lbs. Capacity
Feature
ANTI-RATTLE. These D-rings are equipped with a unique anti-rattle feature for a quieter ride. An integrated grommet holds each D-ring tightly against the mounting bracket to stop vibrations.CONVENIENT HOLD. The integrated anti-rattle D-ring grommet is constructed from rubber and provides the additional benefit of holding the D-ring in the horizontal position for easier access when attaching a clevis hook.
READY TO WORK. These D-ring shackles are perfect for off-road, recovery towing applications, featuring a work load limit of 9, 000 lbs. (limited to mounting structure capacity).
HIGH-STRENGTH. With a forged steel build and a welded backing plate, these D-ring tow hooks are constructed for maximum strength.
CORROSION-RESISTANT. To outlast the off-road elements and maintain strong corrosion resistance, these anti-rattle D-shackles are protected with a durable carbide black powder coat finish.
10. Farm Tough Tools D-Ring Recessed 6,000 lb. Tie Down and Backing Plate w/2-1/2 Hardware 9-Pack
Feature
9 complete sets of D-rings, backing plates and 2 1/2" hardware kits. Both components are zinc coated to inhibit rust and corrosion. The d-rings have square holes punched for receiving carriage bolts, providing a smooth and relatively trip free surface. When in use the ring portion raises for application and lies down when not in use, thus creating a flush surface. It is plenty strong and is able to receive multiple tie-down straps simultaneously.Each D-ring has a 6,000 lb straight pull capacity. RATED CAPACITY: Also known as "assembly capacity" or "break strength" is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is NEW. WORKING LOAD LIMIT: The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.
SPECIFICATIONS of d-ring: 1) The base measures 5" x 4-1/2". 2) Hole pattern is 3" x 3-1/2" on centers. Recessed dimension is 3" diameter with a flat edge. 3) The 7/16" diameter ring measures 1-3/4 center. 4) The ring pivots on a 5/16" threaded stud. 5) The pan has a 1/4" drainage hole. HARDWARE: This listing comes with nine (9) hardware kits, enough to complete the installation. Each kit comes with 4 - 3/8" x 2-1/2" long carriage bolts, 4 - fender washers, and 4 - 3/8" nylon locking nuts.
BACKING PLATE is used for support under the floor when installing the tiedown attachments, and prevents the bolts from pulling through. SPECIFICATIONS: 1) The backing plate measures 6-1/2" x 6-1/2". 2) Thickness is 11 gauge (a little thinner than 1/8). 3/8" holes. 3) 3-1/2" diameter cutout. 4) Steel backing plate is zinc coated to inhibit corrosion.
INSTALLATION - these D-rings require routing, or cutting a hole in the floor. We recommend creating/cutting a template and then transferring to the desired location. If you use a 3" hole saw, the d-ring will fit without any further work. Better fit - use a 2-1/2 hole saw then jigsaw the flat edge and then bevel the edge with a wood hasp to create a snug fit.
